Turbo is clicking like an a/c clutch???
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2012
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Turbo is clicking like an a/c clutch???
Just finished my swap and my turbo was doing fine on my other swap and after I started it the first few times on this one, but today it wasn't building boost and made a very loud clicking noise do I put my hand up were the air inlet is and it was pushing air out like a fan
As when it wasnt doing that it would click between the changes
Turbo isn't burning any oil
It is eBay but what would case this
Wastegate is closed and so is blow off valve
Has no in and out shaft play but barely any up and down
Any ideas??? Not getting past -3psi was getting to 7 psi at 4000rpm
As when it wasnt doing that it would click between the changes
Turbo isn't burning any oil
It is eBay but what would case this
Wastegate is closed and so is blow off valve
Has no in and out shaft play but barely any up and down
Any ideas??? Not getting past -3psi was getting to 7 psi at 4000rpm
#3
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: Turbo is clicking like an a/c clutch???
Bearings are bad and the wheels are hitting the housings. Grab the compressor wheel and wiggle it. It willpwill probably move a lot more than it's supposed to.
Thread
Thread Starter
Forum
Replies
Last Post