Hondata injectors cutting out??
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2004
Location: Victoria, BC, Canada
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Hondata injectors cutting out??
hey guys so i have a turbo LS, with hondata s300, and 550's.. during a run when i shift the injectors... cut out? there is a pause and then the car goes again.. it is only happening under hard ecceleration.. any ideas anyone had a problem like this?
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2004
Location: Victoria, BC, Canada
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hondata injectors cutting out?? (roachsboosted16)
its running 14lbs. hmm it could be still got stock fuel pump.. any other ideas?
#7
Re: Hondata injectors cutting out?? (roachsboosted16)
The only way to find out for sure is to hook up a wideband and find out whats actually going on...Anyone of us can sit here and guess for you....Do you have the tune you can load so we can take a look?
Trending Topics
#10
ME LOVE U LONG TIME
Join Date: Jul 2005
Location: Dallas, Tx
Posts: 2,246
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hondata injectors cutting out?? (roachsboosted16)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by roachsboosted16 »</TD></TR><TR><TD CLASS="quote">yeah i would buy the fuel pump. walboro 255 only about $120-200.</TD></TR></TABLE>
more like $90 bucks... get one!
more like $90 bucks... get one!
#11
Honda-Tech Member
Thread Starter
Join Date: Sep 2004
Location: Victoria, BC, Canada
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: (laosonick)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by laosonick »</TD></TR><TR><TD CLASS="quote">my car was doing that too..i coudlnt figure out the problem...i figured out ways to counter it from doing it though...and i was tuned on neptune...</TD></TR></TABLE>
how did you couter it from doing it?
how did you couter it from doing it?
#12
Honda-Tech Member
Thread Starter
Join Date: Sep 2004
Location: Victoria, BC, Canada
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Re: (odishaw)
ok so i put the walbro in thinking that would fix the cutting out problem but no go.. next thing were trying is 3bar map sensor but from what i remember when we installed hondata it cut out.. which was before it was boosted..? any other ideas anyone?
#13
Re: Hondata injectors cutting out?? (odishaw)
Could you see the dead spot on the dyno graph?? It is tuned right, not just a base map for your set-up..dead spot or long hesitation sounds similar..
Thread
Thread Starter
Forum
Replies
Last Post