STR Scatter Shield???????
06-08-2005, 08:27 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: CT, USA
Posts: 5,002
Likes: 0
Received 0 Likes
on
0 Posts
STR Scatter Shield???????
I bought this str scatter shield used and this what I got. Does this seems right one for B series. I never seen a scatter shield uninstalled before. Thanks in advance
06-08-2005, 08:41 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: CT, USA
Posts: 5,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: STR Scatter Shield??????? (wantboost)
Unfortunately I cant just bolt it yet, I should have my motor on monday. Then I'l find out if it fits. Thanks
06-08-2005, 10:39 PM
#7
Honda-Tech Member
Re: STR Scatter Shield??????? (Arturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo »</TD></TR><TR><TD CLASS="quote">that thing come off a car that had a SSAC manifold and caught the car on fire? 
</TD></TR></TABLE>
Oh damm, was the guy okay?
When I was looking for a scatter shield. I looked at the STR one because it was cheaper then GE, but I could have sworn it wasn't approved.
</TD></TR></TABLE>Oh damm, was the guy okay?
When I was looking for a scatter shield. I looked at the STR one because it was cheaper then GE, but I could have sworn it wasn't approved.
Trending Topics
06-08-2005, 11:26 PM
#9
Honda-Tech Member
Re: STR Scatter Shield??????? (Arturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo »</TD></TR><TR><TD CLASS="quote">Why wouldnt it be approved?</TD></TR></TABLE>
I was thinking about something. My bad.
I was thinking about something. My bad.
06-09-2005, 02:00 AM
#10
Re: STR Scatter Shield??????? (TurboChrgd_Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic »</TD></TR><TR><TD CLASS="quote">
I was thinking about something. My bad.</TD></TR></TABLE>
Yeah, that'll teach you to think
I was thinking about something. My bad.</TD></TR></TABLE>
Yeah, that'll teach you to think
06-09-2005, 03:21 AM
#11
Better than steak
Join Date: Jan 2000
Posts: 16,859
Likes: 0
Received 0 Likes
on
0 Posts
Re: STR Scatter Shield??????? (EnzoSpeed)
Franky, I think there was a thread about both GE and STR was ok for NHRA. I think the only requirement is that they are a minimum of1/4" thick steel plate. NHRA knows there is not a commercially available sheild so its ok to run either one. But there is a blanket that is SFI approved, and lighter and its made by Diest.
I think in the old rules it wasnt very clear so that is probably why you were thinking they were not approved.
You had a valid reason to think it wasnt approved. 
I think in the old rules it wasnt very clear so that is probably why you were thinking they were not approved.
You had a valid reason to think it wasnt approved.
06-09-2005, 04:31 AM
#12
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: CT, USA
Posts: 5,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: STR Scatter Shield??????? (TurboChrgd_Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic »</TD></TR><TR><TD CLASS="quote">yeah that looks correct... Man that scatter shield needs some TLC. </TD></TR></TABLE>
I bought this for Stephanie Eggum for $90 shipped and they told me it was in good condition and this is what I got.
</TD></TR></TABLE>I bought this for Stephanie Eggum for $90 shipped and they told me it was in good condition and this is what I got.
06-09-2005, 04:36 AM
#13
Join Date: Jul 2004
Location: Des Moines, IA, USA
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Oh well man. That thing will shine up like new. . .
Whats the weight on something like that, and at what trap/et is one required? or is the rule different depending on your class. . .sfwd for say.
Whats the weight on something like that, and at what trap/et is one required? or is the rule different depending on your class. . .sfwd for say.
06-09-2005, 10:35 AM
#17
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: CT, USA
Posts: 5,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DragSource)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DragSource »</TD></TR><TR><TD CLASS="quote">
Whats the weight on something like that, and at what trap/et is one required? or is the rule different depending on your class. . .sfwd for say.</TD></TR></TABLE>
It weights around 7lbs. I think its required for 11.99 and faster. I'm setting the car up for swfd but mostly for fun. I cant travel to most events so I'l probably have fun with it in the local tracks. Thanks everyone
Whats the weight on something like that, and at what trap/et is one required? or is the rule different depending on your class. . .sfwd for say.</TD></TR></TABLE>
It weights around 7lbs. I think its required for 11.99 and faster. I'm setting the car up for swfd but mostly for fun. I cant travel to most events so I'l probably have fun with it in the local tracks. Thanks everyone
Thread
Thread Starter
Forum
Replies
Last Post
93LSivic
Forced Induction
41
05-07-2003 03:26 PM
