xJJx

Hi, I recently installed a td04h-15g greddy turbo on my 94 del sol and when taking it for a test drive im not showing any boost on my boost gauge. First thing i checked was for a kink in any of the lines and got nothing. The line is tee'd into the line from the turbo nipple to the wastegate actuator. I took the gauge line off and blew into it while my cousin watched the gauge and it showed 5psi. After this i started checking for leaks in all my piping and checked all couplings were tight. Does anyone have anymore ideas of what I should try?

sirtef9

iTrader: (4)

Mines reads 2 pounds when its tuned on 8 pounds, Its a autometer and i dunno either. Checked all connectors and lines, has a good source and reads vacuum correct. who knows lol

Dyce

that doesnt sound like a good spot. hook it up to the back of the intake manifold

xJJx

which exact line off the manifold? ive tried three now.

crvtectim

Can you hear the wastegate opening?

wmac

i tee'd mine off the hose to the fuel pressure regulator.
it works fine, d16z6 w/ greddy 15g
how do you know your building boost? you might have a leak.

boostedEF91

You can find a manifold vacuum source easily. as stated about just T off fuel pressure line. Also Can you here the turbo spooling? And as said before. check all your lines. Make sure there tight and sealed. you might not think you have a leak but if the turbo is working but no boost. then you have a leak. It's a easy fix. GL

W!d3b0dYr3X

check all the wg lines and make sure there is no boost leak on any of the couplers. also if the gauge shows vacuum and then when you get on it and it only goes to 0 make sure there is no exhaust leak before the turbo and that the wg is functioning properly.

turbohatch96y7

iTrader: (15)

Do you have your down pipe connected? All exhaust gaskets installed? Does it read vacume at idle? Any loose couplers? And you have great lungs blowing 5psi lol i kid I kid