Precision 350HP Intercooler for 400whp
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2008
Location: Miami, Florida, USA
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
Precision 350HP Intercooler for 400whp
What would happen if i try to make 400whp or 20psi on pump gas with a T3t4 60 Trim turbo on a built b16a with a 350HP Precision Intercooler?
#2
Honda-Tech Member
Join Date: May 2008
Location: RCautoworks, Bridgeview, Illinois
Posts: 2,312
Likes: 0
Received 1 Like
on
1 Post
Re: Precision 350HP Intercooler for 400whp
Engine would blow up......
What would really happen , intercooler would act like a restrictor, wouldn't work as effectively. I'm sure you could still push 400hp though.
What would really happen , intercooler would act like a restrictor, wouldn't work as effectively. I'm sure you could still push 400hp though.
#3
Make mine whatever you want
Join Date: Apr 2008
Location: Portland, OR
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision 350HP Intercooler for 400whp
You could still make 400hp, it would just take more boost to do it than it would with an intercooler that is made to perform at that level. You could always run it for a while and then change it to a larger one and come on here to tell us how much horsepower you made.
#4
Honda-Tech Member
Re: Precision 350HP Intercooler for 400whp
It'll be fine, but it becomes more inefficient. The core should flow enough for 400whp but there may be an increase in pressure drop across the core along with increased IAT's. The car won't always be at 400whp, so I wouldn't worry about it. Just make sure you have GREAT airflow. If you don't it'll be more like a bomb waiting to explode. lol
#5
Honda-Tech Member
Join Date: Sep 2007
Location: PA, USA
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision 350HP Intercooler for 400whp
honestly just get a bigger intercooler. for 400hp that is going to be holding you back. the amount of cfm's that will be flowing is to much for that intercooler. you'll see a loss in rpm and a wavy dyno graph that will show that the intercooler is to small when trying to reach 400 hp. just sell it and get the precision 600hp.
#6
Honda-Tech Member
Join Date: Oct 2005
Location: greeley, co, usa
Posts: 1,132
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision 350HP Intercooler for 400whp
i made 602hp on 30lbs. with an sc6176 on a 350hp core it didnt break for 2 years of hard driving on the track every weekend and some street driving. it would have been fine had I not added a 100shot of nitrous which upped the boost 3 lbs. I realize I should have installed a bigger intercooler but i didnt and i paid the price... 2 pistons and broke 2 spark plugs off and banged up the head a little. long story short you can make 400 on a 350 core
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Jun 2008
Location: Miami, Florida, USA
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
#11
Man U FTW
Re: Precision 350HP Intercooler for 400whp
I'm sure it has a measurable loss in efficiency; HOWEVER, you should be fine. The concern here is that you're trying to make that power on pump gas. You will be pushing the limits of the fuel and will be running higher IATs due to the smaller intercooler...this could mean you won't reach your goal, but i can't say for certain.
#13
official honda whore
Join Date: Nov 2002
Location: not tellin you where, pa, usa
Posts: 8,454
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision 350HP Intercooler for 400whp
im sure you will be fine, hell look at all the people on here with ebay cores pushing them over 400hp
#15
Thread
Thread Starter
Forum
Replies
Last Post
EF'n Sedan
Classifieds: Forced Induction
10
02-05-2010 02:06 AM