New Dyno numbers.... 600hp+ on stock K20a2 block
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Central Florida
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
New Dyno numbers.... 600hp+ on stock K20a2 block
So I set a new record for my car today on the dyno.
Setup is still the same..
K20a2 stock block, IPS Kt1 cams, Supertech Springs and retainers.
No rods, pistons, head studs, head gasket.... All OEM.
T3/T67 turbo, 1000 Precision Injectors
Picked up about 10hp with the exhaust cutout.
605hp with the muffler, 615hp with the cutout.
This was on Q16 on 24.5psi.
Tq sensor was broken so that is unknown at this point.
Car was tuned by Fred @HPC in South Florida..
Setup is still the same..
K20a2 stock block, IPS Kt1 cams, Supertech Springs and retainers.
No rods, pistons, head studs, head gasket.... All OEM.
T3/T67 turbo, 1000 Precision Injectors
Picked up about 10hp with the exhaust cutout.
605hp with the muffler, 615hp with the cutout.
This was on Q16 on 24.5psi.
Tq sensor was broken so that is unknown at this point.
Car was tuned by Fred @HPC in South Florida..
#5
Honda-Tech Member
Re: New Dyno numbers.... 600hp+ on stock K20a2 block
So I set a new record for my car today on the dyno.
Setup is still the same..
K20a2 stock block, IPS Kt1 cams, Supertech Springs and retainers.
No rods, pistons, head studs, head gasket.... All OEM.
T3/T67 turbo, 1000 Precision Injectors
Picked up about 10hp with the exhaust cutout.
605hp with the muffler, 615hp with the cutout.
This was on Q16 on 24.5psi.
Tq sensor was broken so that is unknown at this point.
Car was tuned by Fred @HPC in South Florida..
Setup is still the same..
K20a2 stock block, IPS Kt1 cams, Supertech Springs and retainers.
No rods, pistons, head studs, head gasket.... All OEM.
T3/T67 turbo, 1000 Precision Injectors
Picked up about 10hp with the exhaust cutout.
605hp with the muffler, 615hp with the cutout.
This was on Q16 on 24.5psi.
Tq sensor was broken so that is unknown at this point.
Car was tuned by Fred @HPC in South Florida..
If you know what RPM the pull started and ended at, you can fill in the torque curve yourself.
- Derek
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Central Florida
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Dyno numbers.... 600hp+ on stock K20a2 block
#10
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Central Florida
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
#12
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Central Florida
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
#13
Re: New Dyno numbers.... 600hp+ on stock K20a2 block
Nice numbers and on a stock block k too... good stuff.
What rpm did you pull till and what housing on the that 67. Trying to judge how laggy that thing is on that setup.
What rpm did you pull till and what housing on the that 67. Trying to judge how laggy that thing is on that setup.
#14
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Central Florida
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Dyno numbers.... 600hp+ on stock K20a2 block
#16
Honda-Tech Member
Join Date: Sep 2003
Location: CA, Canada
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
TravisBiggie
Forced Induction
5
08-23-2013 04:55 AM