My New Project, 2JZ 240SX
#1
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
My New Project, 2JZ 240SX
I know this isnt a 240 forum, but ive gotten alot of interest in the 2JZ 240sx stuff. I figured id share my car that i just finished building.
Tial 44mm
Small 4in IC
SMall injectors
Koyo
UPDATE:
Painted the engine bay today after stripping it:
Installed my 280 cams/springs/ret/TDF Intake manifold/Water Pump/Oil pump:
Painted my valve covers too:
Got my Fuel System installed an my intake manifold done.
Here she is, brought to you by Mainstream Performance/ Turbo Dave Fabrications.
Idling
Dyno Pull
To be continued....................................
Modified by VtecKiDD at 6:34 PM 5/3/2007
Tial 44mm
Small 4in IC
SMall injectors
Koyo
UPDATE:
Painted the engine bay today after stripping it:
Installed my 280 cams/springs/ret/TDF Intake manifold/Water Pump/Oil pump:
Painted my valve covers too:
Got my Fuel System installed an my intake manifold done.
Here she is, brought to you by Mainstream Performance/ Turbo Dave Fabrications.
Idling
Dyno Pull
To be continued....................................
Modified by VtecKiDD at 6:34 PM 5/3/2007
#7
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">Welded aluminum motor mounts huh? No concerns of fatigue and cracking?</TD></TR></TABLE>
solid aluminum
no issues yet on about 10 240 cars
solid aluminum
no issues yet on about 10 240 cars
Trending Topics
#12
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JoePSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JoePSI »</TD></TR><TR><TD CLASS="quote">
Damn, That strut bar needs some TLC.</TD></TR></TABLE>
HAHA yeah it does, just laying around.
Damn, That strut bar needs some TLC.</TD></TR></TABLE>
HAHA yeah it does, just laying around.
#13
Honda-Tech Member
Re: (JoePSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JoePSI »</TD></TR><TR><TD CLASS="quote">
Damn, That strut bar needs some TLC.</TD></TR></TABLE>
LOL, its called REMOVAL and DISPOSAL!!
Damn, That strut bar needs some TLC.</TD></TR></TABLE>
LOL, its called REMOVAL and DISPOSAL!!
#18
Re: My New Project, 2JZ 240SX (Turbocivic94)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SPOOLINmatt »</TD></TR><TR><TD CLASS="quote">
LOL, its called REMOVAL and DISPOSAL!!</TD></TR></TABLE>
Haha, that nismo bar has seen better days.
LOL, its called REMOVAL and DISPOSAL!!</TD></TR></TABLE>
Haha, that nismo bar has seen better days.
#23
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TURBOFTW)
could the weld break eventually, sure, i wont disagree with that. running enough hp it will prob break. It does have rubber on the end of ti to absorb some movement, i really dont think i will have a problem, but if i do, ill come up with something else
#25
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
Re: (harhoosh)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harhoosh »</TD></TR><TR><TD CLASS="quote">What turbo you use?</TD></TR></TABLE>
T??
Got the suspension all done up tongiht, IC piping made, and the ignition system done.
not much left
T??
Got the suspension all done up tongiht, IC piping made, and the ignition system done.
not much left