Max Boost Levels for Crower Econo Billet & Eagle I-Beam Rods
05-09-2003, 12:53 PM
#1
Thread Starter
Join Date: Dec 2001
Location: Somers, CT, 06071
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Max Boost Levels for Crower Econo Billet & Eagle I-Beam Rods
I am looking to put together a solid D16 that can put out atleast 200WHP. Just checking to see if anyone has any experience with either the Crower or Eagle H beam rods. I want to be safe, but am not sure if the Crower I beam rods are really needed. Feedback is definately needed.
05-09-2003, 01:32 PM
#2
Join Date: Jan 2002
Location: NF, Canada, Canada
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
Re: Max Boost Levels for Crower Econo Billet & Eagle I-Beam Rods (KamikazeSol)
If I were you I would put LS rods in for a fraction of the crower economy rods for the same strengh.
But then again, for the price, you can't beat eagle, and I think most guy's have had good experience with them.
But then again, for the price, you can't beat eagle, and I think most guy's have had good experience with them.
05-10-2003, 05:38 AM
#3
Join Date: Jan 2003
Location: northern, va
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
Re: Max Boost Levels for Crower Econo Billet & Eagle I-Beam Rods (Hybrid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hybrid »</TD></TR><TR><TD CLASS="quote">If I were you I would put LS rods in for a fraction of the crower economy rods for the same strengh.
But then again, for the price, you can't beat eagle, and I think most guy's have had good experience with them.</TD></TR></TABLE> Actually how high were you planning to rev till? Cause Ls rods are known to have the weakest rod bolts and are the worst set of rods in the honda line up. My motto is your gonna want to open up the block as little as possible so get it right the first time.....that is unless you are a big baller and have the cash to back it up. Go with the Eagles the econo billets are made in china just like eagles. The crower billets are made here in-house so you get better quality. Thats why you pay $640.00 instead of $350.00
But then again, for the price, you can't beat eagle, and I think most guy's have had good experience with them.</TD></TR></TABLE> Actually how high were you planning to rev till? Cause Ls rods are known to have the weakest rod bolts and are the worst set of rods in the honda line up. My motto is your gonna want to open up the block as little as possible so get it right the first time.....that is unless you are a big baller and have the cash to back it up. Go with the Eagles the econo billets are made in china just like eagles. The crower billets are made here in-house so you get better quality. Thats why you pay $640.00 instead of $350.00
Thread
Thread Starter
Forum
Replies
Last Post
IntegraGSR(-1)
Forced Induction
26
09-25-2005 07:01 PM
