Just got my Drag III kit, but no installation guide or parts lists...
#1
Thread Starter
Join Date: Nov 2001
Location: Saint Louis,, MO, USA
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Just got my Drag III kit, but no installation guide or parts lists...
Does anyone have a parts list so I know what the hell I'm supposed to have? Also, any installation guides or links??
Thanks.
Tom
If anyone has any .pdf files, please email them to me at gsrpoweredsi@prodigy.net
[Modified by blowncivichb, 6:06 AM 12/23/2001]
[Modified by blowncivichb, 6:26 AM 12/23/2001]
Thanks.
Tom
If anyone has any .pdf files, please email them to me at gsrpoweredsi@prodigy.net
[Modified by blowncivichb, 6:06 AM 12/23/2001]
[Modified by blowncivichb, 6:26 AM 12/23/2001]
#2
Honda-Tech Member
Join Date: Jul 2001
Location: San Diego, CA
Posts: 3,070
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got my Drag III kit, but no installation guide or parts lists... (blowncivichb)
http://store.importparts.com/cgi-bin...serTemplate/18
http://rely.net/~dustin/images/turbo_install/
This is all I used..along w/ a couple questions on the board.
http://rely.net/~dustin/images/turbo_install/
This is all I used..along w/ a couple questions on the board.
#3
Re: Just got my Drag III kit, but no installation guide or parts lists... (Etylorcen)
DRAG Generation 3 Kits consist of these HIGH QUALITY parts:
Turbonetics T04/T3 Turbocharger
DRAG 4 into 1 Cast Iron Turbo Exhaust Manifold
Turbonetics Deltagate Mark II Wastegate
DRAG Front Mount Intercooler (Polished Cast Aluminum End Tanks)
Greddy Type S Blow-Off Valve (HKS SSQ BOV available again Feb. 2002)
DRAG Mandrel-Bent Chrome-Plated Piping
DRAG 2.5" Exhaust Down Pipe
DRAG Wastegate Dump Tube
DRAG Blue Silicone Couplers and Clamps
DRAG High Pressure/High Volume Inline Fuel Pump
DRAG Vortech Boost Dependent FMU
DRAG Intake Air Filter Assembly
Map Sensor Bypass Valves
Stainless Steel Braided Oil Feed Line w/ Fittings
Oil Return Line Assembly
All Necessary Hardware and Fittings
All Necessary Hoses and Hose Clamps
All Necessary Gaskets
Turbonetics T04/T3 Turbocharger
DRAG 4 into 1 Cast Iron Turbo Exhaust Manifold
Turbonetics Deltagate Mark II Wastegate
DRAG Front Mount Intercooler (Polished Cast Aluminum End Tanks)
Greddy Type S Blow-Off Valve (HKS SSQ BOV available again Feb. 2002)
DRAG Mandrel-Bent Chrome-Plated Piping
DRAG 2.5" Exhaust Down Pipe
DRAG Wastegate Dump Tube
DRAG Blue Silicone Couplers and Clamps
DRAG High Pressure/High Volume Inline Fuel Pump
DRAG Vortech Boost Dependent FMU
DRAG Intake Air Filter Assembly
Map Sensor Bypass Valves
Stainless Steel Braided Oil Feed Line w/ Fittings
Oil Return Line Assembly
All Necessary Hardware and Fittings
All Necessary Hoses and Hose Clamps
All Necessary Gaskets
#4
Thread Starter
Join Date: Nov 2001
Location: Saint Louis,, MO, USA
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got my Drag III kit, but no installation guide or parts lists... (Arturbo)
Isn't there supposed to be a gasket between the manifold and turbo. Also a gasket between the turbine side and downpipe flange?
Thanks. Tom
Thanks. Tom
#5
Honda-Tech Member
Join Date: May 2001
Location: Midwest
Posts: 5,698
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got my Drag III kit, but no installation guide or parts lists... (blowncivichb)
Isn't there supposed to be a gasket between the manifold and turbo. Also a gasket between the turbine side and downpipe flange?
Thanks. Tom
Thanks. Tom
I was told a gasket is not needed between the ex. mani and turbo or between the turbo and DP.
#6
What is this crap?
Re: Just got my Drag III kit, but no installation guide or parts lists... (Arturbo)
DRAG Generation 3 Kits consist of these HIGH QUALITY parts:
#7
Honda-Tech Member
Join Date: Jan 2000
Location: Northern, CA, USA
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got my Drag III kit, but no installation guide or parts lists... (falconGSR)
Art, are you saying that all the parts in a Drag kit are all HIGH QUALITY? I know thats a subjective thing, not trying to put you on the spot.
Trending Topics
#9
Honda-Tech Member
Join Date: Jan 2000
Location: Northern, CA, USA
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got my Drag III kit, but no installation guide or parts lists... (blowncivichb)
No gaskets?...you've got to be kiddin' me.
#11
Honda-Tech Member
Join Date: May 2001
Location: Midwest
Posts: 5,698
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got my Drag III kit, but no installation guide or parts lists... (blowncivichb)
I was told no. Although someone said something about using a mani to turbo gasket off a 86 Ford Thunderbird Turbo? Maybe a site like http://www.turbonetics.com has gaskets?
-Levi
-Levi
#12
Honda-Tech Member
Join Date: Jan 2000
Location: TX, USA
Posts: 1,627
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got my Drag III kit, but no installation guide or parts lists... (HXMan)
You don't need em.
But I thought it was a good idea, so I got em from http://www.majesticturbo.com
Call em up. They sell em. T3 turbine gaskets. There is no discharge gasket that goes between turbo and downpipe.
But I thought it was a good idea, so I got em from http://www.majesticturbo.com
Call em up. They sell em. T3 turbine gaskets. There is no discharge gasket that goes between turbo and downpipe.
Thread
Thread Starter
Forum
Replies
Last Post