Seeking advice/suggestions with this fresh build's problem.
#3
Honda-Tech Member
Join Date: Jun 2005
Location: IM HERRA GANGSTA
Posts: 5,265
Likes: 0
Received 0 Likes
on
0 Posts
Re: Seeking advice/suggestions with this fresh build's problem.
dood, just tow it to your tuner and have them fix it. it could just be the tune after all.
Trending Topics
#8
Re: Seeking advice/suggestions with this fresh build's problem.
I'm on a TUNED ECU with the MATCHING GM 3BAR MAP Sensor. I understand that not all engines run the same even if they're nearly identical in setup, but Blox C cams themselves ain't gonna make my car mis-fire like crazy and fouling out my plugs.
kyden - I don't have a wide-band.
kyden - I don't have a wide-band.
#9
Re: Seeking advice/suggestions with this fresh build's problem.
you put an aggresive cam in your car and expect it to run good. not sure what there is to misunderstand here. the car is untuned, an ecu from another car thats been tuned is not considered tuned.
#10
Re: Seeking advice/suggestions with this fresh build's problem.
And those cams aren't even that agressive; their profile is less than the B/Stage 2 cams.
#13
Re: Seeking advice/suggestions with this fresh build's problem.
It sounds like an ECU problem... I'd try swapping in a stock ECU just to see if it will drive in gear OK... obviously don't go into boost... but if the problem is it's breaking up AS SOON as it's in gear and you try to drive it... chances are the maps are not setup right for your car.
Also you didn't give any relevant information...
WHAT ECU?
In what way is it "tuned"
What was your friends setup that ran fine with it? same motor/trans? same obd?
It's almost certainly your ECU or map.
Also you didn't give any relevant information...
WHAT ECU?
In what way is it "tuned"
What was your friends setup that ran fine with it? same motor/trans? same obd?
It's almost certainly your ECU or map.
#14
Re: Seeking advice/suggestions with this fresh build's problem.
I know what it's like to run on aftermarket cams with a stock ECU, base map, and a tuned map from another car, and it's definitely not like what I'm experiencing right now.
It sounds like an ECU problem... I'd try swapping in a stock ECU just to see if it will drive in gear OK... obviously don't go into boost... but if the problem is it's breaking up AS SOON as it's in gear and you try to drive it... chances are the maps are not setup right for your car.
Also you didn't give any relevant information...
WHAT ECU?
In what way is it "tuned"
What was your friends setup that ran fine with it? same motor/trans? same obd?
It's almost certainly your ECU or map.
Also you didn't give any relevant information...
WHAT ECU?
In what way is it "tuned"
What was your friends setup that ran fine with it? same motor/trans? same obd?
It's almost certainly your ECU or map.
I have another chipped ECU that I can try swapping out the maps just incase one of them has been short-circuited some how.
It's boiling down to either the ECU or my wiring harness, since I did re-wrap it and did some soldering. I'm gonna open it up, and hopefully I'll find something obviously wrong (LOL).
Appreciate the advice!
Thread
Thread Starter
Forum
Replies
Last Post