I need some info on diameter of ls/b16/gsr crank journals.
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Lufkin, Texas, Angelina
Posts: 944
Likes: 0
Received 0 Likes
on
0 Posts
I need some info on diameter of ls/b16/gsr crank journals.
Like the titles says if anyone has a print out sheet with the main journals and rod journals for these motors I would really like this info.! Thanks in advance.
I tried this in a different section and didnt get any respond.. So anyone with this info please chime in!! or direct me to a better direction where i could find this information.
I tried this in a different section and didnt get any respond.. So anyone with this info please chime in!! or direct me to a better direction where i could find this information.
#3
Honda-Tech Member
Re: I need some info on diameter of ls/b16/gsr crank journals.
http://www.aclperformance.com.au/us/...rings_crus.htm
Click on the bearings for the motor you want and it will tell you the min and max crank journal sizes.
Click on the bearings for the motor you want and it will tell you the min and max crank journal sizes.
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Lufkin, Texas, Angelina
Posts: 944
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need some info on diameter of ls/b16/gsr crank journals.
One more question,,, is tha the inside diameter of the bearings or the outside diameter of the journals?..
#6
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Lufkin, Texas, Angelina
Posts: 944
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need some info on diameter of ls/b16/gsr crank journals.
Acura/Honda B16A2, B16A3, B17A1, B18A1, B18B1, B20B, B20Z Engine Bearings
YOU ARE HERE: ENGINES/VEHICLES > HONDA >B16A2/B16A3 B17A1 B18A1*B18B1 B20B B20Z > ENGINE BEARINGS
*ENGINE BEARINGS
CON ROD BEARING SET
MAIN BEARING SET
Part# Part#
4B1946H
4B1946HX
* 5M1959H
* 5M1959HX
*
Sizes STD, 025, .25 STD STD, 025, .25 STD
Oil Clearance Standard + 0.001" Extra Standard + 0.001" Extra
Half Type Identical Halves Upper & Lower
Material
Tri-metal Hardened steel backs
Tri-Metal
Min Std Shaft Size
1.7709" / 44.980mm
2.1646" / 54.980mm
Max Std Shaft Size
1.7717" / 45.000mm
2.1654" / 55.000mm
Min Std Tunnel Size
1.8898" / 48.000mm
2.3228" / 59.000mm
Max Std Tunnel Size
1.8907" / 48.024mm
2.3236" / 59.020mm
Max Wall at Crown
0.0592" / 1.504mm
0.0587" /1.491mm
0.0790" / 2.007mm
0.0785" /1.994mm
Max Overall Length
0.768" / 19.50mm
0.787" / 20.00mm
*
YOU ARE HERE: ENGINES/VEHICLES > HONDA >B16A2/B16A3 B17A1 B18A1*B18B1 B20B B20Z > ENGINE BEARINGS
*ENGINE BEARINGS
CON ROD BEARING SET
MAIN BEARING SET
Part# Part#
4B1946H
4B1946HX
* 5M1959H
* 5M1959HX
*
Sizes STD, 025, .25 STD STD, 025, .25 STD
Oil Clearance Standard + 0.001" Extra Standard + 0.001" Extra
Half Type Identical Halves Upper & Lower
Material
Tri-metal Hardened steel backs
Tri-Metal
Min Std Shaft Size
1.7709" / 44.980mm
2.1646" / 54.980mm
Max Std Shaft Size
1.7717" / 45.000mm
2.1654" / 55.000mm
Min Std Tunnel Size
1.8898" / 48.000mm
2.3228" / 59.000mm
Max Std Tunnel Size
1.8907" / 48.024mm
2.3236" / 59.020mm
Max Wall at Crown
0.0592" / 1.504mm
0.0587" /1.491mm
0.0790" / 2.007mm
0.0785" /1.994mm
Max Overall Length
0.768" / 19.50mm
0.787" / 20.00mm
*
#7
Honda-Tech Member
Re: I need some info on diameter of ls/b16/gsr crank journals.
Shaft size is the crank size, just like you would measure with a micrometer on the journal.
Trending Topics
#8
Honda-Tech Member
iTrader: (2)
Join Date: May 2007
Location: Murrieta, CA USA
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need some info on diameter of ls/b16/gsr crank journals.
next time post this in the right section, crank journals have nothing to do with forced induction and if you post in the right section you will get info faster.
#9
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Lufkin, Texas, Angelina
Posts: 944
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need some info on diameter of ls/b16/gsr crank journals.
Ok I guess reading owns you and yes I did post in the right section at first but got no respond as I posted above so if you got no input about what the title say Gtfo! Damn why do ppl wanna act like moderators on fourms?!!!
Last edited by GSR_hatch936; 12-18-2009 at 09:28 AM.
Thread
Thread Starter
Forum
Replies
Last Post
TheSwift1
Forced Induction
12
11-12-2002 08:12 AM