feed line qusestion...
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: OR, USA
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
feed line question...
If I run my autometer oil pressure sender and the feed line for my turbo off the same tee on the back of my block will i get an accurate reading?...iv'e looked at sandwich adaptors but i've heard bad about those too.
#2
Honda-Tech Member
Join Date: Oct 2003
Location: Catching Rivers on Fire TWICE
Posts: 6,281
Likes: 0
Received 0 Likes
on
0 Posts
Re: feed line question... (StylishDOHC)
sandwich plates are fine, as well as "t"ing it off of the back of the block, i use a sandwich plate for my oil pressure sender and the stock oil pressure sender has been removed and my feed line is attached there
#4
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: OR, USA
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Re: feed line question... (Mugencrxsir1)
sweet I thought maybe having the feed line and sender coming from the same source might show a pressure drop on the gauge.
#5
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: OR, USA
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Re: feed line question... (StylishDOHC)
anybody else running it as mentioned? also what kind of pressure range should i be seeing on a B motor (oil hot)?
Thread
Thread Starter
Forum
Replies
Last Post
mrbsponge
All Motor / Naturally Aspirated
6
09-25-2004 04:14 PM
Xerxes
Forced Induction
1
01-16-2002 06:53 PM