HELP, ZC throwin code (1 I think), and loud tapping/rattling near cam gears..
#1
Honda-Tech Member
Thread Starter
HELP, ZC throwin code (1 I think), and loud tapping/rattling near cam gears..
I went outside to get ready to go to my friends house, and when I start my car I hear this wear rattling/tapping coming from right near my cam gears. It sounds like valves ticking (They are a little bit, I do need an adjustment); and now my check engine light comes on. It's blinking 1 time, about every 2 seconds. I'm guessing o2 sensor, but not sure. Can anyone help?
jB
jB
#3
Honda-Tech Member
Thread Starter
Re: HELP, ZC throwin code (ED9Hybrid)
ROFL, THanks
Yeah, but on the A/F guage...It's getting fine readings. At idle it drops off, then at cruisin it's swayin in the stoich area, and then I go WOT it goes to rich as the FMU dumps in fuel..
jB
Yeah, but on the A/F guage...It's getting fine readings. At idle it drops off, then at cruisin it's swayin in the stoich area, and then I go WOT it goes to rich as the FMU dumps in fuel..
jB
#4
Honda-Tech Member
Re: HELP, ZC throwin code (PeloTudo)
check all connnections make sure nothing came loose..... reset your ecu after that...
hows all the other stuff coming along?? get the other stuff you wanted yet?
hows all the other stuff coming along?? get the other stuff you wanted yet?
#5
Honda-Tech Member
Thread Starter
Re: HELP, ZC throwin code (ED9Hybrid)
Not yet. I was supposed to get over there today to get the crap, but the guy went to Tampa; so I'm going to have to go tomorrow or Monday. I'm headin to Apopka. I'll just stop by yer house later on so you can fix this for me; I'm getting tired of this having to work on my car crap
jB
BTW,
U might wanna take that MSD out of yer sig..... MSD 0wns me now, not j00
[Modified by PeloTudo, 7:05 PM 8/31/2002]
jB
BTW,
U might wanna take that MSD out of yer sig..... MSD 0wns me now, not j00
[Modified by PeloTudo, 7:05 PM 8/31/2002]
#7
Honda-Tech Member
Thread Starter
Re: HELP, ZC throwin code (ED9Hybrid)
Yeah damnit. I spent a total of like 10 hours over 3 days trying to find one...and ended up having one made for me from a 30mm 10x1.25 bolt...and from a hydraulic shop like 3 minutes away from my house. Got the guy 3 packs of Marlboro (sp?) Menthol Lights, and I was on my way. Now I got leaking out of my oil pressure guage fittin in my engine bay, and this gdamn knocking/tapping/ticking and o2 code.. AHHHH< WILL THE MADNESS EVER END!!!???
jB
jB
Trending Topics
#9
Honda-Tech Member
Thread Starter
Re: HELP, ZC throwin code (ED9Hybrid)
ROFL...
Ok. I'll go to my money tree, pick off a few g's, bring it to your shop, and get it fixed...
I drove it for about 2 hours last night...no check engine light again, and the sound went away. I have no clue WTF is going on...but I don't like it.
Today: MSD, woohoo
jkB
Ok. I'll go to my money tree, pick off a few g's, bring it to your shop, and get it fixed...
I drove it for about 2 hours last night...no check engine light again, and the sound went away. I have no clue WTF is going on...but I don't like it.
Today: MSD, woohoo
jkB
Thread
Thread Starter
Forum
Replies
Last Post
ScottEK
Honda CRX / EF Civic (1988 - 1991)
1
10-02-2002 09:30 AM
pelotudo
Honda CRX / EF Civic (1988 - 1991)
1
08-31-2002 04:16 PM
gregv
Honda CRX / EF Civic (1988 - 1991)
2
07-29-2002 08:17 AM