mac_24_seven

iTrader: (1)

It's says 34 31 E




If it helps any, on the compressor side, the outlet is 2"

Through trading stuff I got this turbo (along with all the other goodies to run it) for free and I'd like to know what I'm dealin with here so I can know abotu how much boost I can run,since 2 lbs on one turbo making xx hp isn't always the same on another turbo at 2 lbs.

I'd appreciate any help guys! I'm doin my best to learn all I can and I've got alot from this forum!

Terrance

Modified by mac_24_seven at 4:29 AM 8/19/2008


Modified by mac_24_seven at 5:09 AM 8/19/2008

mac_24_seven

iTrader: (1)

Nothin?

The best I can figure out, is it's a Precision 3431e... Problem is the specs say the a/r is .63 but my turbo says it's .60.

Rob03Pro5

Your .60 AR is on the compressor side - that is fine because it's a T04E housing.

The .63 AR is for the hotside - look at the inside of the exhaust housing, it should be stamped ".63"

mac_24_seven

iTrader: (1)

Between the manifold and the turbo or by the exhaust turbine?

EJ8 944

It sould be inside the exhaust inlet on the exhaust housing.

mac_24_seven

iTrader: (1)

Which requires removal of the manifold, correct?

Plz excuse my ignorance, I've been getting a crash course is turbos as of late. It makes sense to me that the inlet is what is connected to the manifold.

Plus I wanna make sure before I break it apart.

Rob03Pro5

According to your pics, the turbo isn't installed on the manifold..

Or did you install the turbo already?

You'll need to remove the turbo from the manifold, and look at the exhaust inlet. So in your terms, that would be the place between the turbo and the manifold. Look in there.. should be a .63 stamped in there.

mac_24_seven

iTrader: (1)

Yep, it's installed on the manifold.

See, I got this turbo system for free and I'm just trying to figure out what it is so I know what I need to do. If it's indeed a 3431e precision, I think it's too big and I need to downsize a lil bit. I'll also need a kleenex because thats an awfully expensive turbo to get for free

ahobbs

sc34...that's the turbo E-housing

da_dude

sc34 = garrett t3/t4 57 trim

ahobbs

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by da_dude &raquo;</TD></TR><TR><TD CLASS="quote">sc34 = garrett t3/t4 57 trim</TD></TR></TABLE>

thanks i needed to be reapeted

Mr. Em1

iTrader: (1)

sc34 there guy, nice turbo!

mac_24_seven

iTrader: (1)

Well, just to be sure, here's some exhaust pics.



If you guys are sure it's sc34, I'll go with it. I"m just happy it's not a cheap fake ebay turbo



Modified by mac_24_seven at 4:27 AM 8/20/2008

da_dude

It's a precision sc34 for sure.