my first turbo install need advice kinda lost
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: mashpee, ma, us
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
my first turbo install need advice kinda lost
for reference its a 94 gsr with
b18a block
je forged 9.2-1 comp pistons
crower billet h beam rods arp bolts
gsr oil pump
95 gsr head
oversized exaust valves
skunk2 cams pro 1/aem cam gears
ported gsr intake mani w/o secondarys stock gsr tb
stock fuel pump and injectors
2 1/4 exaust no cat
hondata s300 in p06 with relay for vtec running b16 with greddy turbo base map compliments of hondata
i have a cast manifold with jdm sport 50trim (i know its crap but all i got for now)
obx duel port wastgate
i have a greddy type rs bov
fmic
no boost controller at the time and a autometer carbon fiber boost guage
now my confusion i got everything together turbomanifold waste gate bolted on cold piping is done fmic is mounted exaust is on vacuum lines are on not sure if they are properly routed what do i do next anything i have to do with this tune to make boost or could my lines be f'd up i ran bov to a t above the map sensor compressor nipple to the lower waste gate fitting with a t in it to the boost guage i dont think im makin boost cause its not reading on the guage and im not blowing off please help i need a good direction to head in
b18a block
je forged 9.2-1 comp pistons
crower billet h beam rods arp bolts
gsr oil pump
95 gsr head
oversized exaust valves
skunk2 cams pro 1/aem cam gears
ported gsr intake mani w/o secondarys stock gsr tb
stock fuel pump and injectors
2 1/4 exaust no cat
hondata s300 in p06 with relay for vtec running b16 with greddy turbo base map compliments of hondata
i have a cast manifold with jdm sport 50trim (i know its crap but all i got for now)
obx duel port wastgate
i have a greddy type rs bov
fmic
no boost controller at the time and a autometer carbon fiber boost guage
now my confusion i got everything together turbomanifold waste gate bolted on cold piping is done fmic is mounted exaust is on vacuum lines are on not sure if they are properly routed what do i do next anything i have to do with this tune to make boost or could my lines be f'd up i ran bov to a t above the map sensor compressor nipple to the lower waste gate fitting with a t in it to the boost guage i dont think im makin boost cause its not reading on the guage and im not blowing off please help i need a good direction to head in
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: mashpee, ma, us
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Re: my first turbo install need advice kinda lost
will that cause me to not boost or is it not an ideal setup y what is the problem should i run my non hogged gsr mani /w secondarys still do i have everything hooked up right
Thread
Thread Starter
Forum
Replies
Last Post
AMS MIKE
Southern California (Sales)
30
05-03-2007 03:54 PM