fitting on turbonetics turbo
#1
fitting on turbonetics turbo
I found a fitting on the bottom side of my turbonetics turbo that was not capped and had no line hooked up. Can someone tell me what this fitting is usually hooked up to and should I cap it off? Thanks
#2
Moderator
iTrader: (14)
Re: fitting on turbonetics turbo
Its mainly used as a boost reference source for a boost controller (be it manual or electronic). Its something that is optional to use, because sometimes that nipple is too strong a source.
If you don't plan to use a boost controller now, just cap it off with a closed end of vacuum hose. You'll be just fine.
If you don't plan to use a boost controller now, just cap it off with a closed end of vacuum hose. You'll be just fine.
Thread
Thread Starter
Forum
Replies
Last Post
bowdown201
Honda Civic / Del Sol (1992 - 2000)
3
04-30-2009 11:42 AM