F22B1 HEAD GASKET QUESTION :)
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: WA
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
F22B1 HEAD GASKET QUESTION :)
Hey Guys i just got my car Turbo 3 months ago and still had the factory head gasket and have already blew it.I am having the hardest time finding a good quality head gasket that will hold 10PSI or more if i decide to go higher on a built motor later.I have tried Cometics,i have tryed golden eagle.I do not want to put OEM on there casue i know it will blow agian.A friend of mine mention that i could go with two factory head gaskets and through the together and put it on and i do not want to do that.I would like to know if anyone is runnign a good quality head gasket on an F22B1 vtec motor that is boosted and not leaked or blown yet.The speed shop im going through has taken them 4 weeks to get me an answer if they can get one for my car or not.Please if someone can help it is much appriciated.Thanks alot.
#2
Re: F22B1 HEAD GASKET QUESTION :) (Brycen)
1st thing, if your hg blew you probably have knock...
Use an OEM honda headgasket. They are Multi layer steel and very nice.
And get some headstuds instead of bolts. I had some issues on my engine and currently use an F23 gasket and ARP H23 headstuds and no problems...
Use an OEM honda headgasket. They are Multi layer steel and very nice.
And get some headstuds instead of bolts. I had some issues on my engine and currently use an F23 gasket and ARP H23 headstuds and no problems...
#4
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: WA
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
Re: (O3DigitalBath)
hehe i have ARP headstuds, im just trying to find a head gasket.I don't want to use a factrory one but if i have to then i will.Thanks guys.
#7
* B A N N E D *
Join Date: Jul 2005
Location: Boost City Biiiiiiitch, Somewhere, MARS
Posts: 459
Likes: 0
Received 1 Like
on
1 Post
Re: (Brycen)
I know I know, back from the dead, but did you put the head studs in 1 by one, or pull the head off completely, replace the head gasket.... and do the studs whilwe the head was off???
I know, dumb ? but i neeeds ta know.
Thanks man.
I know, dumb ? but i neeeds ta know.
Thanks man.
Thread
Thread Starter
Forum
Replies
Last Post