wpgcivic

my 60-1 has a little bit of shaft play on it so you can see a tiny bit of grinding on the compressor housing from the turbine...i just want to use this turbo for about 3 months, is there anything i can do for the time being?

shortyz21

yeah run it. other then new bearings, and a new wheel + balancing. which is more then a new 60-1.


if it hit already the wheels gimped already, maise well run it till it dies

wpgcivic

can i sand a little of the compressor housing on the inside where its hitting so that there isnt any contact made or will that screw up the cfm?

ham

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wpgcivic &raquo;</TD></TR><TR><TD CLASS="quote">my 60-1 has a little bit of shaft play on it so you can see a tiny bit of grinding on the compressor housing from the turbine...i just want to use this turbo for about 3 months, is there anything i can do for the time being? </TD></TR></TABLE>

the turbine is on the hot side. how can the turbine be grinding the compressor housing? im confused.

but anyways... it sounds like your turbo is shot and you shouldnt use it.