almost through with my new manifold
#1
Honda-Tech Member
Thread Starter
almost through with my new manifold
still have to weld on the wastegate flange and do some cleanup work in the collector,but other than that, it is pretty much done.you will see the mockup turbo laying on the ground below the manifold.don't pay any attention to it.it is just lying there.
Modified by turbotypeR at 7:56 AM 1/16/2004
Modified by turbotypeR at 7:56 AM 1/16/2004
Trending Topics
#8
Re: (Smokinsax)
is that the way the trubo sit if so you are going to kill the turbo ..... the oil will get trap in the body but nicer job then the so called manifold guys on this site
#10
Honda-Tech Member
Join Date: Jan 2002
Location: Bradford Ontario, Canada
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Re: (fabman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fabman »</TD></TR><TR><TD CLASS="quote">is that the way the trubo sit if so you are going to kill the turbo ..... the oil will get trap in the body but nicer job then the so called manifold guys on this site </TD></TR></TABLE>
Humm I was wondering the same thing, but the oil return line will still be pointing down to the pan. I don't think it will do to much harm.
Humm I was wondering the same thing, but the oil return line will still be pointing down to the pan. I don't think it will do to much harm.
#11
Honda-Tech Member
Join Date: Mar 2003
Location: Fredericksburg, VA, USA
Posts: 2,153
Likes: 0
Received 0 Likes
on
0 Posts
Re: (fabman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fabman »</TD></TR><TR><TD CLASS="quote">is that the way the trubo sit if so you are going to kill the turbo ..... the oil will get trap in the body but nicer job then the so called manifold guys on this site </TD></TR></TABLE>
He said the turbo is just lying there. You can see the flange in the pic. I didn't see any imports when I was down in Al this summer. But I did see your car at the Bristol NOPI turbotyper.
He said the turbo is just lying there. You can see the flange in the pic. I didn't see any imports when I was down in Al this summer. But I did see your car at the Bristol NOPI turbotyper.
#17
Honda-Tech Member
Thread Starter
Re: (BG Boost)
thanks guys! won't be mass producing them.for it to be profitable for me,they would cost to much.not to mention.that it would take a little work to get it inthe car.(smaller fan,re-route a/c line,etc.)
#20
Re: almost through with my new manifold (jerseykid609)
looks really good man
What size bends did you use>? what are the radius'?
I am considering doing something similar on my car.
It seems like a bitch to get in some of the spots to weld it up.
I was looking at your other pics and it seems you ended up having to make some changes from the last post?
Matt
What size bends did you use>? what are the radius'?
I am considering doing something similar on my car.
It seems like a bitch to get in some of the spots to weld it up.
I was looking at your other pics and it seems you ended up having to make some changes from the last post?
Matt
#21
Honda-Tech Member
Thread Starter
Re: almost through with my new manifold (tHIS oNE)
the bends are 16 gauge 321 stainless.i used 4 2.5" clr,4 3" clr, and 1 1.5" for the wastegate .i did have to make a few changes from the last pics.basically only on the number three runner.it had to kick out a little more to make the tight bend it needed.i think number four had to have a small straight piece as well
#22
Honda-Tech Member
Join Date: Mar 2002
Location: sacramento, ca, usa
Posts: 3,818
Likes: 0
Received 0 Likes
on
0 Posts
Re: almost through with my new manifold (flip1199)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by flip1199 »</TD></TR><TR><TD CLASS="quote">do u have any pics of it not mounted on the car?</TD></TR></TABLE>
#24
Honda-Tech Member
Join Date: Feb 2002
Location: 648 at 8,500
Posts: 2,937
Likes: 0
Received 0 Likes
on
0 Posts
Re: almost through with my new manifold (TeStUdO)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TeStUdO »</TD></TR><TR><TD CLASS="quote">am I the only one who cant see the pics??????</TD></TR></TABLE>
Yes
EDIT- I guess not
Modified by Kwuaymaikrup at 12:38 AM 1/16/2004
Yes
EDIT- I guess not
Modified by Kwuaymaikrup at 12:38 AM 1/16/2004