airesearch/garrett m11 ID help
07-24-2011, 11:19 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2011
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
airesearch/garrett m11 ID help
i have a garrett m11 t4 that im having trouble sizing i was wondering if any1 could help me out
inducer larger turbine size is 2 3/4...small is around 1 7/8
hot side large is 2 3/4 ...small is 2 1/4
not much is printed on the inducer housing just says airesearch and has m11 printed on it
i can post pics if it will help anybody ID it
thanks fellers
inducer larger turbine size is 2 3/4...small is around 1 7/8
hot side large is 2 3/4 ...small is 2 1/4
not much is printed on the inducer housing just says airesearch and has m11 printed on it
i can post pics if it will help anybody ID it
thanks fellers
07-25-2011, 11:19 AM
#3
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: airesearch/garrett m11 ID help
you need pics... and you need to physically measure the inducer with a set of calipers... a few mm makes the difference between some wheels
Thread
Thread Starter
Forum
Replies
Last Post
jackhunt321
Forced Induction
1
05-09-2007 08:03 AM
actuator, air, aireseach, airesearch, airesearchm11, airresearch, compressor, garrett, honda, housing, m11, research, subaru, t3, tech, wastegate
