what fittings do I use for Oil sandwich?
#1
Junior Member
Thread Starter
Join Date: Oct 2003
Location: FL, usa
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
what fittings do I use for Oil sandwich?
I am using a mfactory plate it has 3 1/8 ports. What I need to know is the AN or NPT fittings to use since I keep gettng confused with those two terms.
thanks
thanks
#6
Re: what fittings do I use for Oil sandwich? (Papa John)
need more info on what you r doing
for the turbo i use -3an line and 1/8npt to -3an fitting
for ls/vtec i use -6an line and 3/8npt to -6an and 1/8npt to -6an fittings and 1/8npt plug for the head
for the turbo i use -3an line and 1/8npt to -3an fitting
for ls/vtec i use -6an line and 3/8npt to -6an and 1/8npt to -6an fittings and 1/8npt plug for the head
#7
Re: what fittings do I use for Oil sandwich? (DA_HONDA_BOY)
check it out http://store.summitracing.com/...49624
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Oct 2003
Location: FL, usa
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Re: what fittings do I use for Oil sandwich? (DA_HONDA_BOY)
Sorry it's for turbo oil feed line and thanks for the link I was just on the summit page but missed that
Thread
Thread Starter
Forum
Replies
Last Post
Freeltec
All Motor / Naturally Aspirated
5
10-09-2005 10:06 AM
JDMCRX
Forced Induction
11
08-22-2003 08:14 AM