Notices

12V switched power source???

Thread Tools
 
Search this Thread
 
Old 04-19-2006, 02:28 PM
  #1  
Member
Thread Starter
 
rollydc69's Avatar
 
Join Date: Dec 2003
Location: san diego, ca, USA
Posts: 3,398
Likes: 0
Received 0 Likes on 0 Posts
Default 12V switched power source???

hello!! I have a 1993 CX with GSR swap, my question is where to get a good 12V switched power source?? I have 4 essential electronics equipment that need a 12v switched power. Thanks.

Hall effect sensor from tony1
Apexi Boost solenoid
AEM C2DI (it has 2 wires needed for 12V switched power source)
AEM wideband
Old 04-19-2006, 03:33 PM
  #2  
Junior Member
 
yellowrexsi's Avatar
 
Join Date: Sep 2005
Location: elmira, ny
Posts: 345
Likes: 0
Received 3 Likes on 3 Posts
Default Re: 12V switched power source??? (rollydc69)

if you don't use it. Tap off the cigarrette lighter. Just tap into the power from behind the lighter where it connects
Old 04-19-2006, 03:54 PM
  #3  
Member
Thread Starter
 
rollydc69's Avatar
 
Join Date: Dec 2003
Location: san diego, ca, USA
Posts: 3,398
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 12V switched power source??? (yellowrexsi)

u mean tap those 5 wires in 1 source (cigarett lighter)???, do u think they are not gonna get overload??
Old 04-19-2006, 04:03 PM
  #4  
Junior Member
 
yellowrexsi's Avatar
 
Join Date: Sep 2005
Location: elmira, ny
Posts: 345
Likes: 0
Received 3 Likes on 3 Posts
Default Re: 12V switched power source??? (rollydc69)

Shouldn't. It has a 15 amp fuse to protect it. I hooked 3 gauges off mine and it was ok. I think if you was to use the lighter, you would have problems though. That might overload it.
Old 04-19-2006, 04:05 PM
  #5  
Junior Member
 
yellowrexsi's Avatar
 
Join Date: Sep 2005
Location: elmira, ny
Posts: 345
Likes: 0
Received 3 Likes on 3 Posts
Default Re: 12V switched power source??? (yellowrexsi)

just seen you had 5, that might be too much. Isn't the aem c2di supposed to go off the ecu power
Old 04-19-2006, 04:56 PM
  #6  
Member
 
playahwitgame's Avatar
 
Join Date: Mar 2005
Location: germantown, md, usa
Posts: 2,304
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 12V switched power source??? (yellowrexsi)

i used my radio power wire. it will be red. like it says above, ciggarette lighter also. just get out the meter and start checkin
Old 04-19-2006, 05:06 PM
  #7  
Honda-Tech Member
 
Turbo-charged's Avatar
 
Join Date: Jun 2002
Location: Maryland, USA
Posts: 6,939
Likes: 0
Received 1 Like on 1 Post
Default Re: 12V switched power source??? (playahwitgame)

use a relay so that when you turn the igntion on, you get your 12v switch power directly off the battery. off of the relay you can run it to a distribution block, and have nearly as many poles as you want....i think they usually come in 5 or 10 pole.

same concept as when people run a relay to their fuel pump. that way you supply the fuel pump (or in your case the distribution block) with power directly off the battery.
Old 04-19-2006, 06:30 PM
  #8  
Moderator in Chief
iTrader: (2)
 
Muckman's Avatar
 
Join Date: Sep 2001
Location: Buffalo, NY
Posts: 9,506
Likes: 0
Received 4 Likes on 4 Posts
Default Re: 12V switched power source??? (yellowrexsi)

Do you think the cig lighter fuse circuit could support 5 gauges including a wideband? Oh and a V1 radar detector?
Old 04-19-2006, 06:33 PM
  #9  
Member
Thread Starter
 
rollydc69's Avatar
 
Join Date: Dec 2003
Location: san diego, ca, USA
Posts: 3,398
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 12V switched power source??? (Turbo-charged)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbo-charged &raquo;</TD></TR><TR><TD CLASS="quote">use a relay so that when you turn the igntion on, you get your 12v switch power directly off the battery. off of the relay you can run it to a distribution block, and have nearly as many poles as you want....i think they usually come in 5 or 10 pole.

same concept as when people run a relay to their fuel pump. that way you supply the fuel pump (or in your case the distribution block) with power directly off the battery.</TD></TR></TABLE>

hmmm, care to explain what parts do i need or can you tell me where i can find a write up for this, Im not really good at electronics. Thanks.
Old 04-20-2006, 02:35 PM
  #10  
Junior Member
 
yellowrexsi's Avatar
 
Join Date: Sep 2005
Location: elmira, ny
Posts: 345
Likes: 0
Received 3 Likes on 3 Posts
Default Re: 12V switched power source??? (Muckman)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Muckman &raquo;</TD></TR><TR><TD CLASS="quote">Do you think the cig lighter fuse circuit could support 5 gauges including a wideband? Oh and a V1 radar detector? </TD></TR></TABLE>
I doubt that
Old 04-20-2006, 02:39 PM
  #11  
Honda-Tech Member
 
vaporboy12's Avatar
 
Join Date: Nov 2003
Location: Gettin sum, maryland
Posts: 3,771
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 12V switched power source??? (yellowrexsi)

you need a 30 amp bosch relay and a dist block... all can be gotten and a local car audio store....
Old 04-20-2006, 02:45 PM
  #12  
 
Brain3208's Avatar
 
Join Date: Sep 2005
Location: Philadelphia, PA, USA
Posts: 516
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 12V switched power source??? (yellowrexsi)

I've powered plenty of parallel circuits into my Ciggarette lighter, you might just need to switch to 20A Fuse though to support the added load, long as you don't go pluggin in a friggin 500W amp into you Cig lighter you shouldn't need to worry.

Brain
Old 04-20-2006, 03:05 PM
  #13  
wrenchin'
 
I Have an STD's Avatar
 
Join Date: Sep 2003
Location: Full of shit in NY, USA
Posts: 3,643
Likes: 0
Received 1 Like on 1 Post
Default Re: 12V switched power source??? (Brain3208)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brain3208 &raquo;</TD></TR><TR><TD CLASS="quote">I've powered plenty of parallel circuits into my Ciggarette lighter, you might just need to switch to 20A Fuse though to support the added load, long as you don't go pluggin in a friggin 500W amp into you Cig lighter you shouldn't need to worry.

Brain</TD></TR></TABLE>

i agree with this because the guages are really only little light bulbs and such. they take almost ZERO amperage to run them. as for the wideband , thats only a few volts by itself too. i wouldthrow a 25 amp fuse in there and use the ciggy lighter. i know FOR A FACT that even if u use a 30 amp fuse, if you overlaod the circ, it will still blowthe fuse before it damages the wiring. ihad a short in my cig lighter once, right to the chassis, and i tried sticking a 30 amp fuse in it and it took like 4 seconds before it blew out.
Old 04-20-2006, 07:58 PM
  #14  
Honda-Tech Member
 
vaporboy12's Avatar
 
Join Date: Nov 2003
Location: Gettin sum, maryland
Posts: 3,771
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 12V switched power source??? (I Have an STD)

that can be done but i wouldnt want vitual **** like that ran of of that i would rather spend the extra time and wirer in a relay and have it right... have 5 thing ran off the cig lighter is ghetto in my opioni but thatrs just me
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
civicvtec44
Honda Civic / Del Sol (1992 - 2000)
2
05-16-2009 09:58 PM
That Sob
Audio / Security / Video
3
11-01-2005 01:51 PM
greekspeed
Acura Integra
1
04-11-2003 05:58 AM



Quick Reply: 12V switched power source???



All times are GMT -8. The time now is 09:25 PM.