ULTIMATE PART OUT!!!
#1
ULTIMATE PART OUT!!!
First things first.... you want pics ask, i have 4 kids a wife and busy Rottweiler dog... (who do you think is my favorite?☺)i dont have time to post pics of literally dozens of parts... im assuming this will be a long process so i will list the main parts worth mention and then post whats already sold. I will not post prices at first... im going to tease around and see what happens... Need sold so prices will be modest.. .so here we go..
I have a 2000 gsr with jdm front.. i was in the process of building lsvtec and ran out of.money... only parts missing are motor mounts and wiring harness. And a few small ins and outs(the extra pcv hoses and fittings for the block) and some servicing(turn fly wheel and disc brakes yadda yadda)
Gsr tranny excellent working order
Motor-b18a with p72(OBD1 no harness but has dizzy and every single seal has been replaced with brand new even all orings in oil plugs throttle body gasket. Oil pump gasket intakr and exhast manifold gaskets.)
Complelty refurbished b18a bored and honed to 81.5. Brand new Rs p73 pistons(type r high compression.. i think like 12.1) new arp bolted ls rods and ls fluted crank recently micropolished and balanced. Brand new acl bearings rods and mains. Password jdm magnetic drain plug(brand new).
P72 head fulling reconditioned cleaned and a valve job done. (Bought the head 2nd hand woth new crower stage 2 cams and blox cam gears... im sure the vlaves and springs woild be aftermarket bit nlt sure) vtec works. Its bolted to the block by new arp studs with cometic lsvtec 81.5 headgasket.
Skunk2 type R intake manifold(the "limited" red one) with stock throttlebody and fuel system. Brand new aem intake. Skunk2 alpha v2 header 421 header 2.5"(brand new header, intake is lightly used)..
Topped with freshly painted type R valve cover(black crinkle paint) and gold skunk 2 valve cover low profile bolts.
Skunk2 aplha n1 style exhaust good condition
The motor was never run and all parts are clean as a whistle.
Now the long list...
Gsr ecu base mapped for b20 low compression(you can get re done using chrome)
Jdm front end. Good condition including all parts balck housing hid headlights(hood and femders are white brumper is yellow, white jdm honda wing)
Jdm (says japan) itr tail loghts perfect condition.
Jdm itr steeering wheel, db8 itr rear seat(black suede red stitch and NO tray).
Skunk2 coilovers
Bwr camber uppers
And every part inbetwen
TEXT ME FOR PICS AND PRICES NO TRADES
CASH IS KING
LOCATED IN COCOA BEACH
3215054511
I have a 2000 gsr with jdm front.. i was in the process of building lsvtec and ran out of.money... only parts missing are motor mounts and wiring harness. And a few small ins and outs(the extra pcv hoses and fittings for the block) and some servicing(turn fly wheel and disc brakes yadda yadda)
Gsr tranny excellent working order
Motor-b18a with p72(OBD1 no harness but has dizzy and every single seal has been replaced with brand new even all orings in oil plugs throttle body gasket. Oil pump gasket intakr and exhast manifold gaskets.)
Complelty refurbished b18a bored and honed to 81.5. Brand new Rs p73 pistons(type r high compression.. i think like 12.1) new arp bolted ls rods and ls fluted crank recently micropolished and balanced. Brand new acl bearings rods and mains. Password jdm magnetic drain plug(brand new).
P72 head fulling reconditioned cleaned and a valve job done. (Bought the head 2nd hand woth new crower stage 2 cams and blox cam gears... im sure the vlaves and springs woild be aftermarket bit nlt sure) vtec works. Its bolted to the block by new arp studs with cometic lsvtec 81.5 headgasket.
Skunk2 type R intake manifold(the "limited" red one) with stock throttlebody and fuel system. Brand new aem intake. Skunk2 alpha v2 header 421 header 2.5"(brand new header, intake is lightly used)..
Topped with freshly painted type R valve cover(black crinkle paint) and gold skunk 2 valve cover low profile bolts.
Skunk2 aplha n1 style exhaust good condition
The motor was never run and all parts are clean as a whistle.
Now the long list...
Gsr ecu base mapped for b20 low compression(you can get re done using chrome)
Jdm front end. Good condition including all parts balck housing hid headlights(hood and femders are white brumper is yellow, white jdm honda wing)
Jdm (says japan) itr tail loghts perfect condition.
Jdm itr steeering wheel, db8 itr rear seat(black suede red stitch and NO tray).
Skunk2 coilovers
Bwr camber uppers
And every part inbetwen
TEXT ME FOR PICS AND PRICES NO TRADES
CASH IS KING
LOCATED IN COCOA BEACH
3215054511
Last edited by Pmhearns; 10-05-2015 at 06:09 PM. Reason: Forgot tranny
#3
Re: ULTIMATE PART OUT!!!
Facebook is lame I'm a grown man, I don't have Facebook, Twitter or any other lame social media BS. I have an actual life.. You know, career, family and friends. Or maybe you don't, troll. You're not going to inquire about any goods for sale? THEN GTFO.
I will post a few pics in a later hour, just for you, oh and don't cry buddy... I'm sure you have tons of "friends" and "likes" and whatever other weak excuse it gives you to feel liked
I will post a few pics in a later hour, just for you, oh and don't cry buddy... I'm sure you have tons of "friends" and "likes" and whatever other weak excuse it gives you to feel liked
#4
Re: ULTIMATE PART OUT!!! Pics added
150$ if motor doesnt go as whole
2000$ with everything..
Included with motor.. part out if dont sell.
There photos.. have photos of intior and other stuff but no sign.. please text
Thread
Thread Starter
Forum
Replies
Last Post