FS: 2006 honda accord v6 6mt j32 swapped
11-22-2013, 06:34 AM
#1
Honda-Tech Member
Thread Starter
FS: 2006 honda accord v6 6mt j32 swapped
Hello all, selling my 2006 Honda accord coupe. Vehicle has 83,400 miles. I swapped in a 3.6 liter j series motor that I built using all OEM parts. Was tuned by John Vega, and makes 306 whp/276 ftlbs of torque.Motor has 1500 miles now. Also has a 06 LSD tl transmission.. intake manifold and throttle body from a 2010 3.7 Acura Tl. TB was maxbored and ported runners with the intake manifold port matched. 4 inch custom intake with vibrant velocity stack and filter. l. Car has neuspeed sport springs and koni yellow shocks along with ct engineering rear sway bar. Car rolls on 17x8.5 31 offset ssr wheels with 245/45/17 michelin pilot super sport tires.
price is FIRM at $12,000.
price is FIRM at $12,000.
Last edited by simione; 02-27-2015 at 05:31 AM.
11-29-2013, 03:03 PM
#3
Honda-Tech Member
Thread Starter
Re: FS: 2006 honda accord v6 6mt j32 swapped
car now has a 3.6 liter j series motor. 306 hp/276 ftlbs of torque. tuned by John Vega. $12,000 firm
Last edited by simione; 03-04-2014 at 05:51 AM.
03-04-2014, 06:56 AM
#6
Honda-Tech Member
Thread Starter
Trending Topics
04-09-2014, 10:04 AM
#17
Honda-Tech Member
Thread Starter
06-18-2014, 07:21 PM
#20
Honda-Tech Member
Join Date: Jun 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: 2006 honda accord v6 6mt j32 swapped
Did you use your factory tranny when you did you swap and is it automatic? Do you think I could do it with a factory tranny from and 03 accord using a j35a8
06-18-2014, 07:59 PM
#21
Honda-Tech Member
Thread Starter
Re: FS: 2006 honda accord v6 6mt j32 swapped
My vehicle is 6 speed manual. Your 03 accord transmission will not bolt up to a j35a8. The bolt pattern is different. Some have changed the bell housing on their transmission to the j35a8 one, and then it will bolt up. Hope this helps
