SL0WEGG

This may be a silly question to some. I have an idea of how I'm going to set this up, Just unsure if its going to work like I think it will lol. Within the S Manager you can pick and choose the output/input(I can't think of this exactly right now but you get the picture) and whenever you set whichever one you want IE: Jumper plug for CEL. Am I able to just wire in from one to the other through a switch to set this up no problem? What if I choose the a/c, would you send a power to that pin or a ground? Any help would be greatly appreciated. Thanks in advance.

0mtber

iTrader: (2)

You can setup on-board datalogging based on condition only i.e. over x mph and x tps or you can set it up via a switched input.

Read the smanager help file, it is there for a reason :-)
http://hondata.com/help/smanager/index.html

SL0WEGG

I'd like to set it up on a switch. I've read the help file. Since i'm not using a/c anymore and the pin is b5 as shown in the help file there. Do I set I send a positive signal to the b5 pin or a neg signal? I know it sounds dumb as hell lol But i'd hate to fry my ecu sending a + when it should be -.

0mtber

iTrader: (2)

You can inverse the input in the smanager. I would send it a ground signal.

SL0WEGG

Thanks