putting injector resistor box on p30?
#1
Honda-Tech Member
Thread Starter
putting injector resistor box on p30?
can it be done? do i just wire the 4 wires to my 4 injector ground wires or will my ecu not work with the box? if this does work, will my stock b series injectors work?
i pretty much understand the benifits from the resistor box just dont know if it will work with my ecu and injectors
i pretty much understand the benifits from the resistor box just dont know if it will work with my ecu and injectors
#2
iTrader: (2)
Re: putting injector resistor box on p30?
You only need a resistor box if you are running low impedance injectors.
The ecu has nothing to do with your resistor box.
The ecu sends ground pulses via signal wires to each injector.
The resistor box gets wired into the power wire that runs to each injector....
The ecu has nothing to do with your resistor box.
The ecu sends ground pulses via signal wires to each injector.
The resistor box gets wired into the power wire that runs to each injector....
Thread
Thread Starter
Forum
Replies
Last Post
BoostBoi
Honda CRX / EF Civic (1988 - 1991)
2
11-13-2004 11:50 PM
Honda_Tengoku
Honda Civic / Del Sol (1992 - 2000)
2
04-11-2004 03:00 PM