How to set up Hondata s300 w/ water/meth
04-13-2009, 07:09 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Titusville, fl, United States
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
How to set up Hondata s300 w/ water/meth
I recently ordered Honda S300 and was wandering if there was any guide to setting up Hondata to control a water/meth injection set-up...
04-14-2009, 05:53 AM
#4
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Titusville, fl, United States
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to set up Hondata s300 w/ water/meth
awesome...
Yes, turning the pump on and off, and failsafe wiring.... I'm still waiting for it to come in the mail but I want to get an idea of how to wire everything.
Yes, turning the pump on and off, and failsafe wiring.... I'm still waiting for it to come in the mail but I want to get an idea of how to wire everything.
04-20-2009, 12:56 PM
#7
Honda-Tech Member
Join Date: May 2006
Location: Huntington, NY
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to set up Hondata s300 w/ water/meth
You can download the SManager software from Hondata.
In the Parameters window there is a Nitrous/AUX 1 input/output that can be setup as Water/Alcohol Injection.
You'll have to wire it according to the input and output pins you select.
In the Parameters window there is a Nitrous/AUX 1 input/output that can be setup as Water/Alcohol Injection.
You'll have to wire it according to the input and output pins you select.
Trending Topics
04-23-2009, 07:27 AM
#9
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Titusville, fl, United States
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to set up Hondata s300 w/ water/meth
sitinduk
Re: How to set up Hondata s300 w/ water/meth
You can download the SManager software from Hondata.
In the Parameters window there is a Nitrous/AUX 1 input/output that can be setup as Water/Alcohol Injection.
You'll have to wire it according to the input and output pins you select.
Thanks for the response man,
however how do you wire the level switch.. for fail safe..? Or how to I wire the switch to change tunes/switch on water/meth...?
I have an idea of how this needs to be hooked up, I was just wandering if anyone knows of a place I could get a diagram of hondata hooked up to a water/meth set up w/ the failsafe..etc
ralph11sec
Re: How to set up Hondata s300 w/ water/meth
dont forget the relay!
Yep.. IK you don't want to run the system straight off of the computer..lol
a relay is def. needed.
Re: How to set up Hondata s300 w/ water/meth
You can download the SManager software from Hondata.
In the Parameters window there is a Nitrous/AUX 1 input/output that can be setup as Water/Alcohol Injection.
You'll have to wire it according to the input and output pins you select.
Thanks for the response man,
however how do you wire the level switch.. for fail safe..? Or how to I wire the switch to change tunes/switch on water/meth...?
I have an idea of how this needs to be hooked up, I was just wandering if anyone knows of a place I could get a diagram of hondata hooked up to a water/meth set up w/ the failsafe..etc
ralph11sec
Re: How to set up Hondata s300 w/ water/meth
dont forget the relay!
Yep.. IK you don't want to run the system straight off of the computer..lol
a relay is def. needed.
05-03-2009, 08:48 PM
#10
Junior Member
Thread Starter
Join Date: Mar 2007
Location: Titusville, fl, United States
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to set up Hondata s300 w/ water/meth
Ok since nobody had a place to find a already completed Diagram I threw this Diagram together..LMK what you guys think...
Thread
Thread Starter
Forum
Replies
Last Post
integra123
Forced Induction
4
02-23-2006 10:33 AM
Kwuaymaikrup
Forced Induction
2
12-27-2003 01:00 PM
