How to burn with the Ebay Top853 Programmer
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: SD Thief KiLLER, ca, thief killer
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
How to burn with the Ebay Top853 Programmer
Ok so after banging my head with this burner i finally found a work around to burning SST512 chips for obd1 ecu's
Hardware overview:
· TOP 853 EEPROM Burner (ebay can be bought for 50.00 bucks)
· TOPWIN 6 (http://www.topwin6.com/tops/topwin6.exe)
· SST27SF512 EEPROMs (ebay or google search)
Lets burn that binary file to chip
Open and launch application then click file and open file. Select binary file from location
Now that you have selected your file put the Buffer start at 0800 this enabled the program to start at that hex value in the program burn to chip, for the correct offset as we are using 512 chips. Click okay. Now I would suggest to Erase and Blank the chip now.
Now burn and verify to chip. If everything was successful you'll be good to go. If you still have issues burning chips. Could be two possible issues. One the chip is bad, or two you'll need to add this line to the following file located in the TOP directory.
Edit device853.lst
add and replace the following....
Find "EEP SST SST27SF512 ,SST27SF 2"
Replace With" EEP SST SST27SF512 ,SST27SF 2,vcc=5000,dly=3"
Burning SST27SF512 Chips with the TOP 853 Burner
Hardware overview:
· TOP 853 EEPROM Burner (ebay can be bought for 50.00 bucks)
· TOPWIN 6 (http://www.topwin6.com/tops/topwin6.exe)
· SST27SF512 EEPROMs (ebay or google search)
Lets burn that binary file to chip
Open and launch application then click file and open file. Select binary file from location
Now that you have selected your file put the Buffer start at 0800 this enabled the program to start at that hex value in the program burn to chip, for the correct offset as we are using 512 chips. Click okay. Now I would suggest to Erase and Blank the chip now.
Now burn and verify to chip. If everything was successful you'll be good to go. If you still have issues burning chips. Could be two possible issues. One the chip is bad, or two you'll need to add this line to the following file located in the TOP directory.
Edit device853.lst
add and replace the following....
Find "EEP SST SST27SF512 ,SST27SF 2"
Replace With" EEP SST SST27SF512 ,SST27SF 2,vcc=5000,dly=3"
Last edited by dem0nk1d; 02-14-2011 at 09:15 AM.
#3
Re: How to burn with the Ebay Top853 Programmer
Edit: Doesn't like Windows 7. Looking into fixes, XP virtual machine works just fine.
Last edited by wideawake; 07-09-2011 at 07:28 PM. Reason: Updated Info...
#4
Honda-Tech Member
Thread Starter
Join Date: Aug 2005
Location: SD Thief KiLLER, ca, thief killer
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to burn with the Ebay Top853 Programmer
yeah it's not compatible with windows 7, you can try running it in windows xp under a vm and may work. it's all about the stupid drivers..
#5
Re: How to burn with the Ebay Top853 Programmer
will this burner work w/ other chips? i added the vcc and the dly behind it.. i have a tms27c256 chip passes blank check but when it goes to burn it says error at: 00000: (FF)
Thread
Thread Starter
Forum
Replies
Last Post
alexthegrinch
Engine Management and Tuning
1
10-02-2008 07:05 PM
853, burn, burner, chip, ecu, eeprom, eprom, file, honda, programmer, review, sst27sf512, supporting, top853, topwin6