eManage Ultimate with AEM TwinFire CDI not triggering
04-03-2013, 10:58 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2007
Location: Oregon City, OR, USA
Posts: 1,745
Likes: 0
Received 2 Likes
on
2 Posts
eManage Ultimate with AEM TwinFire CDI not triggering
I just posted this in the tech/misc forum, but wanted to post the topic here as well since it is related to my tuning platform and ignition and thought some of you guys might have thoughts.
Situation is: running a Greddy eManage Ultimate and an AEM Twinfire CDI, but can't get the eManage to trigger the AEM; both units are known working. For sanity, please keep all responses in this thread.
Situation is: running a Greddy eManage Ultimate and an AEM Twinfire CDI, but can't get the eManage to trigger the AEM; both units are known working. For sanity, please keep all responses in this thread.
04-04-2013, 08:30 AM
#3
Honda-Tech Member
Join Date: Oct 2003
Location: Los Angeles, CA, USA
Posts: 1,499
Likes: 0
Received 0 Likes
on
0 Posts
Re: eManage Ultimate with AEM TwinFire CDI not triggering
How do you have your triggers set up in the e-manage? Is this for your prelude? The Greddy E-Manage is a piggy back computer so you essentially have one coil output. Are you just trying to trigger one or all four? How are your dip switches on the side of the Twinfire set?
04-04-2013, 11:13 PM
#4
Honda-Tech Member
Thread Starter
Join Date: Oct 2007
Location: Oregon City, OR, USA
Posts: 1,745
Likes: 0
Received 2 Likes
on
2 Posts
Re: eManage Ultimate with AEM TwinFire CDI not triggering
Responses posted in the other thread. TwinFire fuse is fine as I can get the unit to trigger by grounding the inputs.
Thread
Thread Starter
Forum
Replies
Last Post