Crome unknown problems.pls help!!
#1
Crome unknown problems.pls help!!
Hi to everyone!I buy honda ecu tuning kit from moates.I try to read the chip from the tuner who program my car and now the chip is empty.I try to make new one and all go succesfull but my check engine never turn off and car does not start.My tune was:b16a2 forced,omni4bar map,precision 780cc 12om,stock throtle and intake,t3t4 turbo.HERE IS WHAT I DO ON FREE CROMEpen crome,select p30g edm civic b16a2(209),remove checksum,quick datalogger and rtp,p30 option bite hack,install rev tools,add extra features,advance boost tools,select xenocron 4bar,14 boost columns,add fuel tools,multiplier calculator new injector 800cc,advanced table-injector battery offset-select precision turbo 525cc 12om,and disable all sensors.CAN I DO SOMETHING ELSE?pls help me because i talk to moates and dont know.....
#3
I'm Huge In Japan
Re: Crome unknown problems.pls help!!
First off I have to assume it's not chipped correctly, because that's the most common problem. Second I have to assume the chip may have been installed backwards, is not seated correctly, or is defective. Third idea would be to check the engine codes.
If it's code 0, it's either a wiring problem or most likely a bad rom. Use the JDM P30 base, I don't think the EDM base works at all.
Don't add the option byte hack. Don't add rev tools, you don't even need that.
Don't add extra features until you've set up boost tools, burned a chip and know it works.
Don't disable ANY sensors unless you actually don't have one of them, and you better have good reason for not having any of them other than VTP and O2.
Go to PGMFI.org and search before you post, literally every question or problem you will have with Crome has already been answered, most of it by me, and any new threads containing old problems will be deleted.
If it's code 0, it's either a wiring problem or most likely a bad rom. Use the JDM P30 base, I don't think the EDM base works at all.
Don't add the option byte hack. Don't add rev tools, you don't even need that.
Don't add extra features until you've set up boost tools, burned a chip and know it works.
Don't disable ANY sensors unless you actually don't have one of them, and you better have good reason for not having any of them other than VTP and O2.
Go to PGMFI.org and search before you post, literally every question or problem you will have with Crome has already been answered, most of it by me, and any new threads containing old problems will be deleted.
Thread
Thread Starter
Forum
Replies
Last Post
mattsnooz
Forced Induction
8
05-29-2008 12:18 PM
JDMlyfestyle
Forced Induction
4
07-17-2005 11:11 PM