b18c jdm type r OBD2A Connector Help
#1
b18c jdm type r OBD2A Connector Help
b18c jdm type r OBD2A Connector Help
I need help for these 3 connectors
where to connect these 2 connectors
are these driver side shock tower or passenger side connectors if are why they are closed?
and this in connector C in ecu plug C17 ALTF where to connect this connector
I need help for these 3 connectors
where to connect these 2 connectors
are these driver side shock tower or passenger side connectors if are why they are closed?
and this in connector C in ecu plug C17 ALTF where to connect this connector
#3
Honda-Tech Member
Join Date: Jan 2004
Location: houston, texas, usa
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c jdm type r OBD2A Connector Help
The first 2 connectors are junction plugs. The caps stay in place and dont plug into anything.
The third plug you're calling ALTF is the VSS plug.
The third plug you're calling ALTF is the VSS plug.
#4
Honda-Tech Member
Join Date: Oct 2003
Location: Los Angeles, CA, USA
Posts: 1,499
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c jdm type r OBD2A Connector Help
Correct the first 2 are junctions and do not need to be plugged in. If the connector labeled AltF is truly Altf than that gets plugged into the alternator.
#5
Re: b18c jdm type r OBD2A Connector Help
thank you for your help
i recheck and these 2 first connectors are dead end plug connector for wiring resistor box
and for the third plug is VSS
i recheck and these 2 first connectors are dead end plug connector for wiring resistor box
and for the third plug is VSS
Thread
Thread Starter
Forum
Replies
Last Post
Nameless RB26
Tech / Misc
13
10-13-2002 10:56 PM