B20B, B20Z piston rings are the same?
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Location: france
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
B20B, B20Z piston rings are the same?
I am going to rebore my B20Z + .25mm, but as I run turbo I would like B20B pistons .
Rings + .25 for B20B 13021-P3F-003 are not available anymore, I would like to know if those for B20Z 13021-PHK-003 are exactly the same, if the only difference it is the part number?
Thank you very much..
Laurent
Rings + .25 for B20B 13021-P3F-003 are not available anymore, I would like to know if those for B20Z 13021-PHK-003 are exactly the same, if the only difference it is the part number?
Thank you very much..
Laurent
#4
Honda-Tech Member
iTrader: (1)
Re: B20B, B20Z piston rings are the same?
I would check the helm manual, there should be specs for inspecting the rings. That should give you an idea if they are the interchangeable or not.
Dammit, I have a set of .25os PHK pistons and rings back in Florida. I have no idea which box I put them in though.
Dammit, I have a set of .25os PHK pistons and rings back in Florida. I have no idea which box I put them in though.
#5
Moderator
iTrader: (14)
Re: B20B, B20Z piston rings are the same?
Ok. I'll recirculate the argument. The ONLY difference between the two is the compression ratio and dome height. As a manufacturer of millions of units, it is a matter of logic that you use the same set of rings for the engine unless it is specialty. So, it means YES, they use the same stuff. A helms will confirm it, but as a matter of production schedule and vendor use, YES.. Yes.. and did I mention, YES?
Thread
Thread Starter
Forum
Replies
Last Post