margaflow

If someone knows the specs of the spoon sports camshafts , can anyone tell me about it .

And how this camshafts can be compare to the jun stage 3 or the toda spec C.

The spoon sports would work for drag racing?

A D NOH

Spoon Sports cams would work for Drag racing, just how well would they work

Spoon Sports is a road racing company. they design their products for alot of mid range power. I wouldnt buy a set of spoon cams for drag racing.
If you want to know the specs someone in the ITR or Road Race forum would know.

margaflow

Drag racing :

So what camshafts would be great for a b16 engine


I have a CRX and i 'm runing 12.24 in the 1/4 mile . I only have je pistons on my engine and i would like to upgrade my camshafts but i want to put the best camshafts i can for drag racing.



[Modified by margaflow, 7:50 PM 1/20/2003]

margaflow

Give me an aftermarket camshafts for drag racing.

Chugger

id say jun 3's, skunk 2 or 3's, toda b's c's d's

margaflow

Someone have the specs of the jun stage 3 camshafts , and the dyno result.

TREVER

I have seen jun 3 make over 240 whp on street driven 2 liters 3 times.

HondaNHRA

The JUN typeIII cams have a max valve lift of 12.0mm and a duration of 304 degrees; there will be added stress to the valvetrain components. Make sure you upgrade to Jun's valvesprings and titanium retainers with the cams and you might be needing to move rev limiter to get full potential of cams