When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts! 2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it. 3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned 4) NO WTB ADS! 5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE 6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
I have a Skunk2 Pro Series intake manifold for a gsr head. Used in good condition. Manifold only. $165 shipped in US only.
I also have a 1 gallon jazz fuel cell, lid sticks and is hard to open sometimes. The lid flange could probably could be messed with to work better. Im selling because I got a different cell that worked for me better. Comes with mounting bracket. Has 2 feeds, -10an and -8an. And the return is a -6an. - $50
Also trying to get rid of an obd2 GSR ecu. -$50
PM or text @ 580-382-1661
Serious inquiries only.
Last edited by hondaracing84; 09-05-2015 at 07:37 AM.
Spinwerks 13x10 +5 . Both new this season, in great shape. Selling to pay off a loan. Wheels with tires $800 $650 without. Slicks pre drilled for wheel screws inside and out. 4x100
SKINNIES SOLD.
<a href="http://s31.photobucket.com/user/1979pre/media/Mobile%20Uploads/20150729_210040_zpsyv3dkxod.jpg.html" target="_blank"><img src="http://i31.photobucket.com/albums/c353/1979pre/Mobile%20Uploads/20150729_210040_zpsyv3dkxod.jpg" border="0" alt=" photo 20150729_210040_zpsyv3dkxod.jpg"/></a><a href="http://s31.photobucket.com/user/1979pre/media/Mobile%20Uploads/20150729_210027_zpsng28qxyu.jpg.html" target="_blank"><img src="http://i31.photobucket.com/albums/c353/1979pre/Mobile%20Uploads/20150729_210027_zpsng28qxyu.jpg" border="0" alt=" photo 20150729_210027_zpsng28qxyu.jpg"/></a><a href="http://s31.photobucket.com/user/1979pre/media/Mobile%20Uploads/20150729_205936_zpsoerngssf.jpg.html" target="_blank"><img src="http://i31.photobucket.com/albums/c353/1979pre/Mobile%20Uploads/20150729_205936_zpsoerngssf.jpg" border="0" alt=" photo 20150729_205936_zpsoerngssf.jpg"/></a>
Last edited by Ron Burgandy; 09-02-2015 at 02:09 PM.
Reason: Sold items
I have a MoTeC M400 for sale. This unit is basically brand new. I am in the process of building a fwd and just acquired an m800 and c125. Its been inspected and tested by my former employer Sakata Motorsport. No options have been enabled on either the m400 or SDL. The Sdl does have a sickj *ss billet aluminum bracket and is backlit equipped.
Precision 750hp intercooler with 3" aluminum piping and Tial BOV flange (BOV NOT INCLUDED) has 3" Adel Wiggins clamshell clamps on both ends of the intercooler also comes with brackets to hold intercooler so you can bolt onto the frame for perfect fit. Came off my GSR with topmount turbo kit was used on a 800+hp EG before me - $600 shipped OBO or trade for:
Hondata Coil on Plug setup
Skunk2 90mm throttle body
FCS/NRG 5 gallon fuel tank
Exedy Twin Disc clutch brand new in box - $1000
Hasport billet mounts with billet inserts brand new in box - $250
DTR/Six Sigma Racing Street Sweeper B-Series Header - $600
Hmotorsonline B20B P8R Longblock still on crate - $600 (Local pickup only 27048 area code)
Hmotorsonline 98' Spec ITR Engine+Trans still on crate - $3500 (Local pickup only 27048 area code)
I will send pictures via text. I do not have pictures currently with my HT username.
Pic#1 Antique AEM V1 Engine Management. I have TWO of these. $400.00 OBO
Pic#2 Dented Anodized Black Overflow with filter, -12 fitting. $20.00
Pic#3 Uncoated Overflow with filter and two fittings, -10 and -8. $30.00
Pic#4 Black Satan powdercoated Overflow with filter and clamp , -12 fitting. $45.00
Pic#5 Vibrant Black Anodized puke can with clamp. $50.00
Pic#6-8 AFCO Radiator, custom. 16" wide, 17" Tall(18.5" tall to top of rad cap) 2.5" wide(6" wide with electric fan), -12 fitting on bottom, two `10 fittings on top, two 1/8NPT on side for sensors. Powder coated gloss black, fins have not been powdercoated. It's in great shape and will serve for many laps down the track. $300.00
Pic#9 Brand new BEGI FMU. $130.00
Pic#10 Vinyl wrap off of AEM PRORWD Honda, this is the real deal. It is 27" long, broke the picture down to two pics. Suitable for framing, you cut to suit your taste and frame it. $50.00. I have more.
Last edited by elevatedj32; 09-06-2015 at 09:15 AM.
PRICE: $500 O.B.O
WHERE: Carlisle, PA
CONTACT: PM or drobimw@gmail.com
Garrett T3/T67 H.O. turbocharger, T3 .82AR exhaust housing
This is the dinosaur turbo I have used in my personal car since 2009. It recently has developed a little thrust play and consumes a little oil. It has no problem making 34psi of boost on my K20. It made 697whp @ 28psi for me, and has been dead nuts reliable in its use. I removed it to install a new billet 67mm this past weekend.
It will operate as is, but it will consume a little oil. A rebuild kit is $120~ for this turbo (uses a 360deg thrust).
I would like to see $500, but am open to negotiation. The turbo runs $1,160 new from ATP.
BW S400 67mm turbo
B series FULL RACE twin scroll top mount manifold
Turbo Smart 45mm waste gates (2)
dump tubes and clamps for WG
Chrome plated up pipes
Hello honda tech here to try and sell some stuff.
All prices are with out shipping or paypal fees.
I live in Blythe,CA so shipping to east coast can be spendy.
I use UPS also.
Shoot me offers and for questions.
contact me either here or via text message (760-984-4210)
GO-Autoworks A/C compatible 2.5 in down pipe with 3in exit has 2 o2 sensor bungs, Go-Autoworks cast manifold, and Turbonetics T3/T04 brand new turbo. i would like to sell these altogether. All these parts are brand new and have only been mocked up.-$750
Fuel injector clinic 775CC injectors with pigtails. Brand new never been used
-$250
AEM adjustable fuel pressure regulator for honda fuel rail. Brand new never been used.-$100
AEM Honda b-series high volume fuel rail
Turbo XS dual stage boost controller brand new never been used.-$100
Older used Tial 38mm wastegate with 7psi spring in it.-$100
Older used HKS adjustable BOV-$75
Used Blox racing 0-100 psi liquid filled fuel pressure gauge-$25
hey guys, if anyone is interested in a complete race car or just the full racing drive train let me know. I will put pics later or you can text me for pics at 917273443one,greg
here are details:
built K series all motor aluminum rod and single lobe cam with gold rockers, PPG dog box, twin disc clutch, KTuned racing shifter and Hybrid Racing shifter cables, 64mm Kinsler ITBs, Lean mount kit for EG/DC and NP hood exit header, lean mount oil pan, new CF intake (goes thru bumper)...ready to drop in a car if you want to buy separately - , 16v battery with charger, breather kit with vented valvecover, AEM V2 with harness adapter and IQ9 display... plus more...$15k
Chassis with 10.0 slower bars and separate sub10 sec bar kit (to be installed)...extra doors, slicks with Keizers wheels including skinnies, fully gutted, custom chassis wiring with power panels, engine harness, front fuel cell with cage, fuel rail, water pump, radiator, lines, etc etc....$5k
$19K take everything as it sits...still needs some work to complete but can go through all details with the buyer.
First Name: Stuart
Price: (Firm/OBO) $1,400 firm
Location: Rockwall, TX
Contact: PM or email me at stuart@t1racedevelopment.com
Long story short, I wanted to try the new Xona line of turbos from Forced Performance so I took this turbo off my car (had only been on for 1,000 miles) sent it off to Precision to have it gone through and made like new. They replaced all the internal seals, rebalanced the wheels and sent it back. It has not been installed on a car since. It is literally like new. I will cover shipping anywhere in the US and it can ship the same day payment is received. I am asking $1,400 for this Gen 2 which is very fair considering they are $1,749.99 new. I am including the .82 AR v-band housing, the modified compressor housing, feed and drain fittings, and new drain gasket. You can easily cut off the elbow if that is not how it needs to fit on your car. Anyways, on to the pics!
Name: Patrick
Location: Fredericksburg
Means of contact: PM or text for faster reponse 540-840-4272
Price: Below
Description: Below Everything is in MINT Condition
2 AEM Twin Fire 4 channel ignition boxes, 4 AEM Pencil Coils, AEM EPM and Rywire Harness. $500
Full Blown dual hanger kit with 2 walbro 255 pumps -10 with -6 return fittings $350,
Full blown fuel filter -10 $100,
Aeromotive 13105 Compact EFI Fuel Pressure Regulator $120.
I also have the all the fuel lines that came off my car to make a complete fuel system, will sell everything together for $500.
MSD Digital SCI Plus CD Ignitions 6350
MSD Blaster HVC Iginition Coil
MSD Modified Distributor Cap and Rotor Kit 82923 Civic/Inegra 92-00
$300
Any questions please feel free contact me.
Willing to ship if buyer willing to pay.
Selling a 200-1200hp ignition setup for your Honda. This kit is practically plug and play. All you would need to do is tap two wires (Which I have labelled for you in green) into the ECU and you are good to go. This kit is almost brand new. I used it for 1 dyno sessions and 2 outings at the track.
The kit includes:
- M&W Pro 10 CDI Box
- Crane PS92 Coil
- T1 Mil-Spec harness
- MSD CAP and Wire for external coil
- OEM Distributor setup for this ignition system with new at the time of install OEM Rotor.
Selling for 550$ shipped plus paypal fees. Package deal will not separate.
Used but in great condition
Weldon 2025 -10 in and out 550
Aem fuel rail red 50
Aem series one 1060 ems 450
Golden eagle fuel rail red new in the box 100
Willwood front brake kit with dual piston calipers new in the box 650
Golden eagle electric water pump only 150
09-02-2015, 07:13 AM
September FS
