boostedcivicsir

Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings.

boostedcivicsir

MSD 75611 analog programmable rev limiter. i have had thisin my car for 2 seasons, only used 1, wires are as long as i could leave them. they werent cut to fit. works with all analog boxes, using mine on a 6al. we have gone a different route with this. summit has them for 250~ ill let it go for 200 shipped.



http://www.msdignition.com/Products/RPM/Timing_Controls/RPM_Controls/75611_-_Programmable_Launch_Rev_Control.aspx

0554

Everything has a total of 550 miles on it between driving on the road the track and dyno.
If you have part specific pictures please let me know. Everything is in great condition.


b17a golden eagle sleeved and o ringed block $2500
-84mm cp pistons 9:5.1
-Crower billet rods
-moroso 5qt aluminum oil pan
-arp main studs
-balanced

b16a head $1200
-supertech valves, springs, retainers, itr cams

Gsr transmission with itr lsd and racer steve heat treated gears $800

Competition twin disc $900

Full race t4 topmount twin scroll manifold $1000

Custom intercooler garrett 24x12x3.5 core $750

Two Tial 44mm wastegates $300 Each

Garrett 4294r with 1.01 divided housing $1400

Hondata s300 with boost and hondata solenoid in p28 ecu $650

Catchcan setup with all -10 lines 4 off valve cover and 2 off back of block $550

Weldon 2035 fuel pump $500

Tial Bov $200

aeromotive fpr $200

innovative wideband with gauge $200

b16 Jg Edelbrock intake manifold $350

Bdl 70mm throttle body with vband $200

omnipower drag coilovers $800

Golden eagle scatter shield $175

Tilton Flow control Valve $125

Weld magnum wheels with m/t 24.5x9x13 $800

stroud parachute $250

car is also for sale

96 integra ls $3,000
-custom 10pt cage with parachute mount thats nhra certified
-fiber images carbon hood
-custom carbon sunroof plug
-VIS carbon fiber hatch
-Sparco speed seat
-Stroud window net
-rjs 5point harness
-Sumped fuel tank
-tinted windows
Car was built for drag racing and the doors have the beam cut out of them and everything behind the dash is gone so no heater or anything like that.



all prices are obo and dont include shipping or paypal fees. Please message me with any questions thanks

crob621

Im parting out my car and these are the parts that are left

S300 with P28 Ecu --- $550
DSS axles 2.9 ---- SOLD
SSR H22(h2b) Header --- $500
Full-Race EK traction Bars -- SOLD
Ek coupe 3" header back exhaust with vibrant 3"muffler --- SOLD
MSD 6al with blaster coil --- $150


If u need pics pm me and i will get them to you.

94 ls teg

all the parts have about 500 miles on them almost brand new
1 afi ramhorn manifold t3 with 44 wg 550
2 afi down pipe 180
3 tail 44 wg 275
4 tail 50 mil bov 200
5 680 pte injectors 240
6 intercooler and piping with couplers and tbolts clamps for a ek coupe 200
7 hondata s300 in a p06 550
8 aem ugeo wide band and boost gauge with cluster for an ek 225
pm for pics

85mmek9

Billet crower rods for gsr, about 20 passes and never any problems. $350 obo

jdmintegraxsi

*Head came off of a 2002 RSX Type S.
*Stamped PRB
*Ported and Polished by Blue Print Racing out of California (www.blueprintracing.com)
*Flows around 320 CFM (30 more than a stock head)
*I made 325whp all motor on this head. (all depends on motor build)
*Only comes with cylinder head and valve guides. No valvetrain, cam caps or sensors.
*I do have other parts for this head but are all sold seperately.


This port job goes for $1250 plus the cost of a head which usually runs around $500. This has been a great head. My car went 10.79 @ 127 naturally aspirated with this head on it. Please serious inquiries only. This is a high performance head that will make great power N/A or turbo.

$1250

damndan23

i have a few parts i need gone to fund another turbo build. all parts are on and fit EG with b-series swap pics are kinda crappy so bear with me

custom full-race t3/60mm ramhorn mani, in great shape fits B-series motors $850
tial 60mm wastegate (silver) with clamps and hardware $480
custom 2.5" dumptube for 60mm gate teardrop cut out the bottom. $80
GT35-82R T3. 4" in 2.5" 4bolt out $900
precision 750hp fmic custom polished with eg mounts. $450
Custom polished 2.5" ic piping flanged for 50mm tial.comes with cuplers and clamps $250
DC-sports header heat wrapped RTG fits B-series $100

for more pix and info txt Dan2570-490-8908

things i will trade for are
TOP Mount manifold, B-series
single or dual Back door fmic 650+hp rated
msd billet distributor B-series

tepid1

FS:

Flaming River kill switch - $125


Prologger Wideband/Boost Controller (has brand new Bosch o2 sensor) - $425

2fastGSR

Injector Dynamics S2000 1000cc injectors

Used for one race season.

$395 shipped

tuhboek

Honda civic/crx 88-91 Hasport motor mounts $185 shipped
Used for about a year, in great condition still.

S366 T4 .91AR turbo brand new $1050 shipped

Call or Text me 620 262 7796 name is Sloan

grand champ

Parting out my race car. PM me if your interested in anything. Im in Central Canada, will ship within north america. Prices + shipping
I HAVE DELETED PARTS THAT ARE SOLD!

1993 Honda Civic H/B
New Bosch Starter b series $100
New Bosch Alternator gsr $100
Custom stainless mig welded Tubular Manifold (front face turbo) T3 flange 38mm w/g $200
Custom stainless tig welded Tubular Manifold (front face turbo) T4 flange 38mm w/g $500
3.5” Turbo downpipe (up pipe.. lol) COMES WITH MANI
2” Wastegate Dump COMES WITH MANI

B16A Eagle H-Beams $200
EXIDE 1000ca wet battery (one month old) (78series?) $100
OBD 1 GSR Vtec Dizzy $150
RCI Snell full face helmet $100
RCI Window net $50

B16 Eagle H-beams


Tig mani (t4):






Mig welded mani (t3)

ka_s372

call/text Danny @ 210-445-0055

USED Blaast H22 turbo manifold (t3/44mm wastegate flange) $400 SHIPPED !!

ChokeOnMySmoke

B Series:
Nrg Tech billet bell housing, brand new never used still sitting in the same box from when I received from them. Comes with the hardware also. Pm me if you have any questions. 1750.00 is what I am asking.

d112crzy

88mm H22 Wiseco pistons, 8.5:1 compression. -14cc dish, comes with rings, pins and locks.

$300 shipped OBO

bonesawvw

Injector Dynamics (4) ID 2200cc Injectors $700
includes new injector plugs
used for less than 100 miles. Simply the best injector you can buy.

jdm inc

iTrader: (11)

d16z6 AEM Tru time cam gear. $30 shipped plus paypal

msd blaster 2 coil $25 shipped plus paypal

92-95 civic upper a arm energy suspension bushing $20 shipped plus paypal

ajabbar

Alright guys the time has come and I need to part from my car. I put a lot of time into this thing but other things have come up and I need it gone. My intentions were to build SFWD drag car but my priorities are slowly starting to change I'm getting engaged this spring. Ill also be back in the spring ;-)

Now on to the car!

Exterior:
-Hatchback body! There is not a spot of rust on the vehicle! No mouldings :-) This was not a patch panel repair or anything of that nature.
-Password JDM Fenders with sidemarkers already installed
-Bumpers and fenders will need paint!
-New amber corners!
-Will need tail lights

Interior:
-The entire air bag and heating system was removed! Again I cut major weight by doing this. This was going to be a dedicated track car. Parts Galore has many intact just incase you wanted to try.
-I have almost all the panels and carpet! The interior is all black! Very nice.
-Mint GSR Seats

Engine:
Brand new AVID solid mounts! Got them from Pure Tuning in Toledo, OH
B16a2
ARP Head Studs
Cometic Head Gasket
Hondata Intake Manifold Gasket
Hondata S300 - (Rob Mapps just went 8.99 on S300 its the best!)
eBay header (the car was started on this, was going to be a turbo car)
It will need exhaust
I will throw in a GSR block with main caps and everything that I got for it. This was going to be sleeved 2.0 race motor.

Transmission:
Stock b16a2 transmission no pop outs or grinds (gsr 4th gear makes this trans a gem at the track)

Suspension:
Tokico All Silver Shocks
eBay Coil-on-Sleeve
Skunk2 Camber Kit all the way around.

NEW PRICE: $3200 FIRM EVERYTHING IS INCLUDED! PM ME ALL OTHER OFFERS.

Interested? PM Me with your number and ill contact you. I'm in the Metro Detroit area.

Pictures (I took these real fast this morning, more will be posted later):









^ Your spare block :-)

cbustuner

Precision brand low impedance injectors



I was using the pnp resistor box setup on my 2000 Honda civic. I'm pretty sure it will work with all 96+ Civics. If you want to verify it will work before you buy it check your dead connector with the instructions listed in this thread Complete DIY Plug and Play OBD2 Civic Resistor Box Write-up EJ6 EJ7 EJ8 EM1 EG1 EG2 EH6 - Honda-Tech .The resistor box has a bracket attached to it to mount it in any 96+ civic for a very clean look.


One of the injectors is missing a small plastic ring and it can be see in the pictures. This to my knowledge doesn't affect anything. I have been using these injectors for around 8k miles and made close to 400hp on ethanol with these. These are Precision brand low impedance injectors and take obd1 Honda injector clips.


I want 225 shipped for everything or 205 for the injectors and resistor box. I Will sell the harness by itself for 20 shipped. I will only start selling stuff separately if the injectors sell.

allmotaeg6

Parting out my All Motor B-series motor along with extra parts i have laying around and going a different route. All parts either have 12 1/4 mile passes on them or 6 dyno pulls it will be noted on the side of the item. Also all of the Skunk 2 parts are pretty much brand new with the pro-series valve springs, retainers, throttle body and composite fuel rail having the 6 dyno pulls and I still have all the boxes for the Skunk2 parts. I will sell stuff as a package if you like if you would like to keep stuff together. Prices do not include shipping unless noted. So here’s the list:

ECU:
Hondata s300 w/ p28 - $650

Engine:
Skunk 2 Pro3 cams-$500(has 12 ¼ mile passes)
Skunk 2 Pro series valve springs-$275(6 dyno pulls)
Skunk 2 B/H Dohc vtec retainers-$175 (6 dyno pulls)
Skunk 2 Pro series Black 70mm throttle body-$300 (6 dyno pulls)
Skunk 2 Pro Series cam gears-$150(12 ¼ mile passes)
Skunk 2 black composite fuel rail-$175 (6 dyno pulls)
Edlebrock Victor X GSR intake manifold Throttle body opening is ported to 70mm-$250 (6 dyno pulls)
RC 550cc injectors-$200 (12 ¼ mile passes)
Pauter 4340 rods for B18A/B-$650 (12 ¼ mile passes)
OEM LS 89mm crank-$150
Canton 15-962 steel “L” sump oilpan all b-series-$250 (12 ¼ mile passes)
85MM RS Machines sleeved B18a block with a GSR girdle ARP mains and head studs-$700 (12 ¼ mile passes)
Six Sigma Racing custom side exit header-$800
Valve cover with -10 bungs for breather kit-$150
B&R polished breather kit with black -10 fittings and lines -$150
Vtec solenoid-$40
GSR water necks with -16 bungs welded for AN fitting radiator setup-$60
Golden Eagle oil sandwich plate, line and fitting for vtec conversion-$100
Skunk 2 Black series billet wire cover-$120
OBD 1 alternator has been polished and in perfect working order-$80
Fluidamper B-series race series pulley pn=620601-$350 shipped
ACT streetlite flywheel-$175
ACT 4 puck sprung hub-$100
ACT Maxx extreme pressure plate-$100
JDM 98+spec ITR LSD transmission with ATS 4.9 final drive shifts perfectly-$1400
B-series axels-$100
half shaft-$60
GSR head parts (rockers, caps, rails, lost motion assembly) let me know what you need


Extra motor parts:
Eagle 95mm stroker crank-$500 brand new
Crower 4340 Steel billet rods for b18a/b-b20b-$400
1 more 85mm RS machines sleeved b18a block with z10 girdle ARP Mains and headstuds this one for sure will need to be bored out to 86mm-$300

Swap parts:
Innovative eg/dc solid motor mounts GOLD dipped done by SIK industries here in Santa Clara,CA-$350
DC rear T bracket also in GOLD dipped done by SIK industries -$80
ITR gold shift linage with prothane bushings and Skunk2 dual bend short shifter and Skunk2 shift ****-$150

That’s it for now I will get pictures up of everything as i start taking it apart. Prices are firm but all reasonable offers will be considered and please be reasonable…I spent the money for quality parts and so should you!
Email me for any questions 11secwkeg@gmail.com

JBLAZE622

Borg Warner S366 divided T4 comes with 4in down pipe with flex section has about 10 passes and dyno time still mint....$800 plus shipping

vietjdmboi

B16A hydro transmission..freshly rebuilt (new bearings, synchros 3/4 gear) Quaife LSD - $1,500





-10an hose ends and 10ft of hose - $200





valve cover with 2 -10an bung and the cam gear cover completely cut off - $120



powder coated domant purple vc with 2 -10an bungs..one is stripped - $120





STILL FOR SALE!

1993 civic hatch
Fully painted inside/outside sebring silver off s2000
All new moldings/ caps/bolts/ etc
Apexi n1 99 spec susp
Subframe, lca, rear engine T bracket powder coated extreme chrome
Walbro intank wired with direct 12v
Gsr brakes front/rear with braided lines
All brakes lines have been tucked to the cabin side of the firewall
Benen tie bar and function7 lca’s
Spoon replica mirrors
GSR fat fives with decent tires included

NO seats

here is the build thread for the car https://honda-tech.com/forums/appearance-build-threads-122/vietjdmbois-eg-hatch-build-thread-2212864/

ASKING PRICE - $4,000.00

habib

Sci-l box, msd rpm module selector, msd ignition blaster 3, msd b series dizzy cap - $175 shipped


Go-autoworks FMIC, Backdoor setup, 33x8x3.5, 2.5 inch inlet, 3 inch outlet - $350 shipped

97ek-t

i have a pt 7076h in great condition very very little shaft play and no smoke!
its a .75/.81 ar and 4in inlet 3in discharge and 3in v band exhaust turbo is capable of 820hp

512 775 3524 pics upon request 800 obo

kwboost

I got two sets of Injectors. Peak and hold

4 Fuel Injector Clinic 1150cc Injectors. less than 1k $250 shipped

4 Forced Performance 750cc Injectors. less than 3k $200 shipped


Blitz Turbo timer $50 shipped

I accept paypal. please call me 407 334 4885 if interested.
Kelvin