"Race Gas" fuel additive
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Apr 2006
Location: Easton, MD, US
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
"Race Gas" fuel additive
I'm not saying that im planning on using it, but curious if anyone has used it, and if it works as well as the company says.
I have a 13.25:1. 85mm B20/P8R, Crower 62405a build, and could use some ideas on which fuel i should run, i was planning on 93, or a 93/race fuel mixture. A bit high for straight 93, but my cams have a lot of overlap, so they will bleed off a lot of compression. The area I drive/race is sea level to at most 500ft above.
I have a 13.25:1. 85mm B20/P8R, Crower 62405a build, and could use some ideas on which fuel i should run, i was planning on 93, or a 93/race fuel mixture. A bit high for straight 93, but my cams have a lot of overlap, so they will bleed off a lot of compression. The area I drive/race is sea level to at most 500ft above.
#2
Honda-Tech Member
Re: "Race Gas" fuel additive
Ive tried it on my boosted setup it does work... but I didn't like how it coated my sparkplug porcelain and ground strap orange making it almost impossible to even read them
Trending Topics
#9
Honda-Tech Member
Re: "Race Gas" fuel additive
Just go to your local small airport and pickup some 100 Low Lead AvGas.
Just take your O2 sensor out before you run the stuff.
Just take your O2 sensor out before you run the stuff.
Thread
Thread Starter
Forum
Replies
Last Post
wantboost
Forced Induction
21
04-27-2013 11:34 PM