GT30EK

Two used 8an Kinsler Monster Mesh Fuel Filter 10 Micron. Only have about 30 passes on them in good shape. $60 Each plus shipping, Paypal.

turboed4dr

True Street Trim Chassis For Sale
Description:
1997 Honda Civic Ex Sedan (Roller)
10 point chromoly cage fabricated by Joe @ Tempest Racing (The rear bars are bent to allow rear seat passengers)
Full interior, functional power locks, power windows, power moonroof, OEM lights, signals etc.
Weighing 2450lbs with race setup and driver
Stock suspension
Skunk 2 control arms
Chase Bays brake booster eliminator kit
Sumped gas tank with -8, -10 lines
2 Sparco Sprint seats
Carbon fiber trunk lid
Headlight harness tucked
Battery relocation to front with bracket and kill switch on trunk lid
Rear bumper with diffuser
Dzus fanstened front bumper for quick removal
$2,500
Pictures below. For quickest response please email me mattdaughty@yahoo.com , PM’s will be replied to every night. Thank you

Paul_VR6

FS: 26x10x15 M&H Slicks - ~5 passes on them.

$300 shipped in the lower 48

Universal Magnetic

Location: Vancouver WA 98683
Contact: j.san-juan@students.clark.edu
Text:503-770-8364
Paypal Verified

Price $1000 shipped (48 states). Paypal fees included.

Intercomp EZ Weigh Scales
-PN#170125
-Model#SW500
-Gently used and in great condition
-15" x 15" x 2.5" (381 x 381 x 64mm) Billet Scale Pads
-1,500 lb (700 kg) Pad Capacity
-6,000 lb (2,800 kg) System Capacity
-Cabled Indicator with Case
-Fresh 9-Volt Battery installed
-12V AC adapter included
-Instruction manual included

Turbo-LS

iTrader: (4)

Precision turbine housing T3 .82 vband with clamp and 4" uppipe. $250 obo plus shipping and PayPal

Will_H

iTrader: (1)

4 Piston Outlaw B16 CNC cylinder head, This is a Pro Comp aftermarket head casting comes with original invoice from 4 piston.
Ferrea Stainless valves(standard size)
Ferrea Titanium retainers
Ferrea seat locators
Ferrea Valve springs
Comes with cam caps and everything else pictured on the head. Cylinder 1 has been repaired due to contact with the piston. The head was pulled apart and had both intake and exhaust valves replaced on #1. This was my spare head and had maybe 10 passes on it since repaired. Head was setup to run Ferrea roller rockers and cams. $1,500.






ARP B-series head studs missing 1 washer $75

Manley turbo tuff LS rods with 84mm CP 10:1 pistons with heavy duty wrist pins. Spun a rod bearing 1 rod is probably toast. Very little run time.




NO TRADES. PM me for any questions or more pictures.

boosted03

Located in Louisville, Ky. Buyer must cover paypal fee's and shipping cost. 502.492.3634

Gato Intake for k series- $850


Intercooler with piping with clamps and couplers. $500




Exdy twin for k series. Around 1100 miles $900

MoiMotorsports

unichip a07c65 v6 2000 to 02 accord The Unichip is an in-line, state-of-the-art computer upgrade that tunes stock and custom engine components to perform to their potential, safely and efficiently.

The Unichip is a computer that electronically resides between your car’s ECU and engine, releasing 100 percent of an engine’s untapped power. Sold worldwide for more than a decade, the Unichip is a tested and proven engine performance product used on the street, racetrack, and in off-road applications.

A Unichip installation consists of a Unichip computer module, a Plug-n-Play (PnP) wiring harness, and a performance map dyno-tuned for a specific vehicle & its components. The Unichip is a solid-state computer measuring the size and weight of a MP3 player, using multiple high-speed processors to control engine tuning & performance
$$$300. 0b0 856 332 5450
i have golden eagel main studs for gsr $100

custom 12 by 12 radiator from company foz they will make u any size u need $260

m&h 13by26 8.5 slicks only have 1 pass on them they were to big

fiberglass front end $400

neonkid

10sec4door

For sale located in south jersey 700 + hp 10sec setup. Would love to see her stay together at went 10.1 @ 148 weighing 2350 with driver that has had limited seat time easy 9.7 motor

Gsr long block
81.5 Wiseco eagle
8.8.1 compression
All oem honda bearings used for build

Head
Gsr extrude honed
Crowder springs and retainer ( not brian crower!)
Ferrea pro valves
All new oem seals guides and keepers
Type R cams

S300 with bbg and coil on plug setup tuned on q16 by RSTech
Edelbrock IM aem fuel rail bdl 72mm TB vband with 3 inch intercooler piping

Turbo
Precision. 6262 jb .82 anti surge housing
Full race ram horn custom 4130 up pipes full race back door intercooler tial wg and bov setup had less than 1500 miles I do not have to sell I already have my new set up will part ecu intake mani and turbo kit long block stays together

7500 obo

kungfuSiR

iTrader: (1)

ATS/Carbonetic Twin Disk Carbon/Carbon Clutch.
Purchased in 2012 and used for 2 seasons. I bought a rebuild kit for it from ATS who are the manufacturers of the clutch on behalf of Carbonetic last year to have as a spare. The clutch was used in our Time Attack car, and held 400whp and 250ft/lbs of torque without any issues. Removed from the car in perfect condition, we decided to go with something simpler and less aggressive.

This clutch has the 1350kg pressure plate option. The clutch has an MSRP of $2600 brand new, and the rebuild kit was another $1400.

Asking $1500USD plus shipping. Item is located in Canada but international and shipping to the US can be arranged.

ls_on_boost

iTrader: (5)

b series cc twin disk for sale off of my sfwd integra upgrading to triple disk no longer need this one it has 5 dyno sessions max power 880hp one pull every other pull was under that the pressure plate as you can see was rubbing the weld bracket on my dog box case but did not damage the clutch its fine and still works perfect I recommend you grind the small pieces that are left to clean it up some price is 670 shipped what you see is what you get.

98vtec

Since I decided to part my civic out, here is a break down of everything that is left to this point.

UNLESS NOTED, PRICES DO NOT INCLUDE SHIPPING

H22a long block - unknown mileage 230-250psi compression test:
Ported EuroR head. unknown aftermarket intake valve, unknown bronze intake valve guides, Crower valvesprings and retainers.
ARP head studs, KStuned timing tensioner. OEM bottom end - $1000
[/URL]
[/URL]
[/URL]

M2A4 H22a transmission with unknown mileage. Shifts good - $350
[/URL]

H22 Moroso oil pan with pick up tube - $275
[/URL]


Competition Clutch stage 4 and Exedy OEM weighted flywheel (purchased new through IPG this summer) - $400
-- NOT PICTURED currently

T3 Turbonetics billet 5454 w/ uppipe (in wastegate picture) - $650
[/URL]

NEW T3 Turbonetics billet 6465 .82 - $750
[/URL]

Tial 38mm MVS wastegate w/ dumptube - $250
[/URL]

homemade manifold w/ Go-Autoworks merge collector - $250
-- manifold requires TurboWerx scavenge pump (includes -10AN aeroquip fittings and hosing) - $250
[/URL]
[/URL]

Go-Autoworks cold side charge piping for Tial BOV (not included) - $150
-- includes tbolt clamps and couplers
[/URL]

Go-Autoworks R750 intercooler - $125
[/URL]

DSS EG h22 swap axles (includes both axles) - $150
[/URL]

97+ Prelude Gator axles - $300
[/URL]

Rosko Racing EuroR intake manifold - $550
-- includes BDL 68mm Throttle (needs new return spring) or you can use by backyard engineered return spring
-- FID1000cc injectors - $350 shipped

[/URL]

CJ Tuck harness (non mil spec) EG to H22 - SOLD SOLD
[/URL]

Ktuned adjustable cables and H series transmission adapter w/ RSX shifter (includes extra cable for up an down movement) - $300
[/URL]

H22 Starter - $100
[/URL]

RC440cc injectors - SOLD SOLD
[/URL]

4x100/114.5 XXR 531 16" +20 with BFG kdw2 225/45r16 tires (lots of tread) - $800

[/URL]

DO NOT OFFER A TRADE UNLESS YOU HAVE A TIG WELDER I AM INTERESTED IN!!!!!

mint

iTrader: (1)

BNIB Dedenbear CO2 kit with boost controler and fittings.

10oz bottle
On/off valve
Regulator with high/low pressure with gauges
1/4"10 foot line
Quick connect fittings
Bottle brackets
Mac boost controler
CGA 320 to 1/8" to pin valve "so any paint ball place can refill it"

$230 shipped








Gt4272R
Tial V-band exhaust housing 1.04a/r
2 track days and some street miles on it.

$1950 shipped





Launchpad2006@hotmail.com PayPal verified
Email/PM/Call/text 952-465-8322

DaFredsta

iTrader: (1)

FS: Rear Weld wheels 15inch 4x100 freshly powder coated with stainless ARP hardware 900 shipped/Paypal'd (tires not included)

FS: Tilton throwout bearing with steel braided lines(feed,bleeder) 200shipped/paypal'd


Feel free to text me at 775-229-0218

jdmrhdeg

$1000 OBO
EG/DC REAR DRAG AXLE, LOCATED IN PHILADELPHIA, PA TEXT 267 266 3592

spoolinlude

Accufab 90mm Throttle Body

Mustang 5.0 bolt pattern

Already has a Honda throttle cable plate welded to it and a 3.5" VanJen Clamp (Vibrant) adapter. Also has IAC blocking plate.

Might have 50 miles on it - going a different route. Basically brand new.

$225 Shipped!! - OBO / Best Offer. Worth $300 easy.

eksleeper97

iTrader: (2)

tial 38mm wastegate
10lb spring in it
works great upgraded to 44mm
$125 shipped
text 518-879-5569 website won't let me load pics so text for them. sorry

have top mount manifold for it also for sale

OleGregg

iTrader: (1)

For sale-
Hypertune intake manifold for gsr (b18c1) cylinder head, with dual fuel rails for 8 injector setup, with 77mm throttle body, has velocity stacks inside plenum. brand new never installed. Price$2,800 plus shipping and paypal fee. Price is over $3500 depending on exchange rate from them.
-brand new Full-Race B-series outlaw forward facing manifold $1,100
-brand new Hasport EKK2 mounts for K-series engines into EK's. $500 plus will throw in new Honda tranny bolts for k-series tranny
" border="0" class="tcattdimglink" alt="" />
" border="0" class="tcattdimglink" alt="" />
" border="0" class="tcattdimglink" alt="" />
" border="0" class="tcattdimglink" alt="" />
" border="0" class="tcattdimglink" alt="" />
IMGLINK]
" border="0" class="tcattdimglink" alt="" />
[IMGLINK]" border="0" class="tcattdimglink" alt="" />
" border="0" class="tcattdimglink" alt="" />
" border="0" class="tcattdimglink" alt="" />