Nov FS thread
#1
Moderator
Thread Starter
Nov FS thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
#3
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2006
Location: Ponca City, Oklahoma, United States
Posts: 405
Likes: 0
Received 5 Likes
on
4 Posts
Re: Nov FS thread
Ive got a few things for sale. See below. I can be reached by PM or text 580-382-1661. Text for faster response. Prices are firm unless noted. Prices do NOT include shipping unless noted. Buyer would pay shipping and PayPal fees.
Serious Inquiries only.
M&W Pro-10 ignition w/crane coil and T1 harness. Used for a few seasons. Im only selling because Im going to a coil on plug setup - $550
1 gallon jazz fuel cell, lid sticks and is hard to open sometimes. The lid flange could probably could be messed with to work better. Im selling because I got a different cell that worked for me better. Comes with mounting bracket. Has 2 feeds, -10an and -8an. And the return is a -6an. - $50
Also trying to get rid of an obd2 GSR ecu. -$50
Serious Inquiries only.
M&W Pro-10 ignition w/crane coil and T1 harness. Used for a few seasons. Im only selling because Im going to a coil on plug setup - $550
1 gallon jazz fuel cell, lid sticks and is hard to open sometimes. The lid flange could probably could be messed with to work better. Im selling because I got a different cell that worked for me better. Comes with mounting bracket. Has 2 feeds, -10an and -8an. And the return is a -6an. - $50
Also trying to get rid of an obd2 GSR ecu. -$50
#4
Honda-Tech Member
iTrader: (1)
Re: Nov FS thread
Came off my perfect running motor without any issues. Building a SFWD car so upgraded my valvetrain to Ferrea.
The GSR head it came off of was completely done by Portflow.
Comes with:
Dual Valvesprings
Titanium Retainers
Intake and exhaust valves
Keepers
Asking 450 OBO...will not part out unless I have a buyer for everything
The GSR head it came off of was completely done by Portflow.
Comes with:
Dual Valvesprings
Titanium Retainers
Intake and exhaust valves
Keepers
Asking 450 OBO...will not part out unless I have a buyer for everything
#5
Honda-Tech Member
iTrader: (1)
Join Date: Dec 2001
Location: Somewhere withing the 5 boroughs, NY, USA
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
K series parts... All prices are without shipping, you pay with PayPal add 4% for fees... NO TRADES
K20 RBC with Ferrea high pressure springs, retainers, 6000 series valves. Has new seals, valve job and has been milled... 1k miles $1500
Skunk2 Ultra 1 cams.. 1k miles $875
South Bay 650cc injectors with pig tails 1k miles $250
ASP 2 gal fuel cell for oem washer bottle location $250
Deustchworks inline fuel pump w/ fittings 3 race events of use $175
Golden Eagle fuel rail $50
K20 RBC with Ferrea high pressure springs, retainers, 6000 series valves. Has new seals, valve job and has been milled... 1k miles $1500
Skunk2 Ultra 1 cams.. 1k miles $875
South Bay 650cc injectors with pig tails 1k miles $250
ASP 2 gal fuel cell for oem washer bottle location $250
Deustchworks inline fuel pump w/ fittings 3 race events of use $175
Golden Eagle fuel rail $50
Last edited by BADGUYNY; 11-29-2015 at 06:57 PM. Reason: Update available items
#6
Honda-Tech Member
iTrader: (1)
Re: Nov FS thread
-Borg Warner S300 SX S300SX 91/79 .91 A/R w/ Full Race v-band. $600
-Edelbrock Fuel rail $80
-8 ARP extended wheel studs new $45
-Knock tech knock detector $85
-Intercooler 31" X 12"X 4" 3" inlet and outlet brand new. $155
-HKS boost gauge. JDM yo! $35
-Custom made 3" Vband top mount turbo downpipe wrapped in DEI titanium wrap with one O2 sensor bung, and one 1/8 npt I used for EGT. goes great with above exhaust system. $200
-Edelbrock Fuel rail $80
-8 ARP extended wheel studs new $45
-Knock tech knock detector $85
-Intercooler 31" X 12"X 4" 3" inlet and outlet brand new. $155
-HKS boost gauge. JDM yo! $35
-Custom made 3" Vband top mount turbo downpipe wrapped in DEI titanium wrap with one O2 sensor bung, and one 1/8 npt I used for EGT. goes great with above exhaust system. $200
Last edited by rudebwoy; 11-21-2015 at 04:32 AM.
#7
Honda-Tech Member
Join Date: Sep 2002
Location: Team SpeedTrix, Ca, USA
Posts: 6,332
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
Crx race car. Has a b series allmotor setup made 270hp. Motor setup is a lsv 86mm bore port flow race port head with a B16 face plated gear set. Full Lexan, mb fiberglass doors front end hatch and trunk, aluminum dash and straight axle rear suspension. If u want more details message me. $8500 firm or trade for a shell and $7500 firm located in Ca
Last edited by DxTrix; 11-20-2015 at 06:48 AM.
Trending Topics
#8
Honda-Tech Member
Join Date: Jan 2004
Location: somewhere, CT, USA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
For Sale
brand new never used
Full Race twin scroll T4 for B series
60mm wastgate flange
forward facing outlaw manifold
$1,000+ shipping
Hks slim filter has some cracks in
plastic cage behind filter foam $35 shipped
MT slicks 24.5x9x13 about 15 passes 160 shipped
call or text 860 395 9880 Ryan
Located in Connecticut
brand new never used
Full Race twin scroll T4 for B series
60mm wastgate flange
forward facing outlaw manifold
$1,000+ shipping
Hks slim filter has some cracks in
plastic cage behind filter foam $35 shipped
MT slicks 24.5x9x13 about 15 passes 160 shipped
call or text 860 395 9880 Ryan
Located in Connecticut
Last edited by civichbb18; 11-04-2015 at 03:33 PM.
#10
Honda-Tech Member
iTrader: (2)
Join Date: Mar 2005
Location: socal, Ca, USA
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
Selling Benson Sleeved 81.5mm LS/B18A with main caps.
Bare block with excellent sleeves... Older benson style
the sleeves do not touch.. Block is also O-ringed.
Located in socal.. 800 plus shipping.
DM me offers
Bare block with excellent sleeves... Older benson style
the sleeves do not touch.. Block is also O-ringed.
Located in socal.. 800 plus shipping.
DM me offers
#11
Re: Nov FS thread
First Name: Stuart
Price: (Firm/OBO) $1,400 firm
Location: Rockwall, TX
Contact: PM or email me at stuart@t1racedevelopment.com
Long story short, I wanted to try the new Xona line of turbos from Forced Performance so I took this turbo off my car (had only been on for 1,000 miles) sent it off to Precision to have it gone through and made like new. They replaced all the internal seals, rebalanced the wheels and sent it back. It has not been installed on a car since. It is literally like new. I will cover shipping anywhere in the US and it can ship the same day payment is received. I am asking $1,400 for this Gen 2 which is very fair considering they are $1,749.99 new. I am including the .82 AR v-band housing, the modified compressor housing, feed and drain fittings, and new drain gasket. You can easily cut off the elbow if that is not how it needs to fit on your car. Anyways, on to the pics!
Price: (Firm/OBO) $1,400 firm
Location: Rockwall, TX
Contact: PM or email me at stuart@t1racedevelopment.com
Long story short, I wanted to try the new Xona line of turbos from Forced Performance so I took this turbo off my car (had only been on for 1,000 miles) sent it off to Precision to have it gone through and made like new. They replaced all the internal seals, rebalanced the wheels and sent it back. It has not been installed on a car since. It is literally like new. I will cover shipping anywhere in the US and it can ship the same day payment is received. I am asking $1,400 for this Gen 2 which is very fair considering they are $1,749.99 new. I am including the .82 AR v-band housing, the modified compressor housing, feed and drain fittings, and new drain gasket. You can easily cut off the elbow if that is not how it needs to fit on your car. Anyways, on to the pics!
#12
Re: Nov FS thread
*Please Read Whole AD*
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.
I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.
Text or pm 306 551 5139
- K20/K24 Inline pro Fully built motor - Purchased from Jr Hurley himself. Built by inline pro. $5000 plus shipping WILL NOT TAKE IT APART
http://www.superstreetonline.com/fea...sx-type-s-k24/
specs
InlinePro Race K24 block
K20 head
InlinePro billet crank
InlinePro main studs
InlinePro head studs
ACL Race bearings
CP Pistons
InlinePro connecting rods
InlinePro custom billet cams
InlinePro Stage 4 head package
InlinePro oversized stainless steel intake valves
InlinePro Inconel exhaust valves
InlinePro bronze valveguides
InlinePro machined rockers
InlinePro valvesprings
Supertech valves
InlinePro closed-deck sleeves
InlinePro cylinder O-rings
InlinePro notched block
- Turbosmart 60mm Wastegagte BNIB - SOLD
- G-force Long series K series complete Shifter(used but not a lot)- $850 shipped
- Weldon Fuel Filter new - $80 shipped
- Weldon FPR - $200 shipped
- BNIB Precision Dual Ball bearing 67mm GEN2 Turbo- $2800 shipped
- 8 ID1000's (used but in great working order) - sold
- K-tuned 90mm new only mounted TB does not come with with flange as I had planned to order a new one - Sold
- k series Sheepey Built brand new never mounted or used Manifold(t4 single scroll) Up pipe(4") and Up tube - $1250 shipped
-K series DSS 5.9 axles spindles and hubs. Purchased used from CLM motorsports - sold
- AEM V2 EMS for k series swap - $850 shipped
- K series Comp Twin disk(used on the street for a short period) - $750 shipped throwout bearing included but not pictured
- ALL in Fab centre feed K series Manifold with 90mm opening, 8 Injectors New only mounted - Sold
-FCS 7 Gallon Fuel cell new never used - $700 shipped
- 800+hp Fuel System(off EG coupe) - $700 shipped
- Dual Bosch 044's
-8an Feed/Return braided line
-Fuel Filters
-JW Fab 5 gallon Fuel cell
-$800 shipped the Aeromotive FPR
- BNIB Hybrid racing performance z3 shift cables - $250 shipped
- K-Tuned Traction Bar BNIB for eg- $300 shipped
- Hybrid racing AC/PW steering Delete kit - $200 shipped
- Precision GT4294(71mm turbo rated between 500-800HP) T04 Twin Scroll, AR.98, 4" band outlet- Minor chip on 1 fin. This turbo was used but very little only some dyne time and a few passes at 500hp. - $550 shipped
- Eg With B series front mount 900hp Garrett Core 3" in and out with 3" aluminum piping (dent on the outlet flange of front mount from shipping and piping) - $400 shipped
- Ls-vtec Motor - Built GSR head (super tech full valve train, port and polish, Skunk2 gear, B18b stock block, Gsr stock tranny- $2000 shipped
- Complete JDM Front end(red in colour) with Siebon CF hood - $1000 plus shipping OBO
- Full OEM optional lip kit for integra with JDM Front - Offers?
- JDM SRS ITR Steering wheel( airbag was deployed so not perfect - $250 shipped
- j's racing e.g. front lip fiber glass painted red -$250
- EG CF Hatch complete with tail lights only mounted - 350 shipped
-APR CF Mirrors for eg (needs to be re cleared) - $150 shipped
- Azect Integra JDM front eyelids - $300 shipped
- 1 RCI Harness expired believe in 2010 - $50 shipped
- Chase Bays B series tucked clutch line kit BNIB - $50 shipped
Motor
Wastegate
GForce
Weldon
FPR
Precision
id
90mm
Sheepey
DSS
AEM
Twin disk
ALL in
CF Hatch
Clutch line
Azect
Fuel System
Precision gt4294
APR Mirrors
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.
I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.
Text or pm 306 551 5139
- K20/K24 Inline pro Fully built motor - Purchased from Jr Hurley himself. Built by inline pro. $5000 plus shipping WILL NOT TAKE IT APART
http://www.superstreetonline.com/fea...sx-type-s-k24/
specs
InlinePro Race K24 block
K20 head
InlinePro billet crank
InlinePro main studs
InlinePro head studs
ACL Race bearings
CP Pistons
InlinePro connecting rods
InlinePro custom billet cams
InlinePro Stage 4 head package
InlinePro oversized stainless steel intake valves
InlinePro Inconel exhaust valves
InlinePro bronze valveguides
InlinePro machined rockers
InlinePro valvesprings
Supertech valves
InlinePro closed-deck sleeves
InlinePro cylinder O-rings
InlinePro notched block
- Turbosmart 60mm Wastegagte BNIB - SOLD
- G-force Long series K series complete Shifter(used but not a lot)- $850 shipped
- Weldon Fuel Filter new - $80 shipped
- Weldon FPR - $200 shipped
- BNIB Precision Dual Ball bearing 67mm GEN2 Turbo- $2800 shipped
- 8 ID1000's (used but in great working order) - sold
- K-tuned 90mm new only mounted TB does not come with with flange as I had planned to order a new one - Sold
- k series Sheepey Built brand new never mounted or used Manifold(t4 single scroll) Up pipe(4") and Up tube - $1250 shipped
-K series DSS 5.9 axles spindles and hubs. Purchased used from CLM motorsports - sold
- AEM V2 EMS for k series swap - $850 shipped
- K series Comp Twin disk(used on the street for a short period) - $750 shipped throwout bearing included but not pictured
- ALL in Fab centre feed K series Manifold with 90mm opening, 8 Injectors New only mounted - Sold
-FCS 7 Gallon Fuel cell new never used - $700 shipped
- 800+hp Fuel System(off EG coupe) - $700 shipped
- Dual Bosch 044's
-8an Feed/Return braided line
-Fuel Filters
-JW Fab 5 gallon Fuel cell
-$800 shipped the Aeromotive FPR
- BNIB Hybrid racing performance z3 shift cables - $250 shipped
- K-Tuned Traction Bar BNIB for eg- $300 shipped
- Hybrid racing AC/PW steering Delete kit - $200 shipped
- Precision GT4294(71mm turbo rated between 500-800HP) T04 Twin Scroll, AR.98, 4" band outlet- Minor chip on 1 fin. This turbo was used but very little only some dyne time and a few passes at 500hp. - $550 shipped
- Eg With B series front mount 900hp Garrett Core 3" in and out with 3" aluminum piping (dent on the outlet flange of front mount from shipping and piping) - $400 shipped
- Ls-vtec Motor - Built GSR head (super tech full valve train, port and polish, Skunk2 gear, B18b stock block, Gsr stock tranny- $2000 shipped
- Complete JDM Front end(red in colour) with Siebon CF hood - $1000 plus shipping OBO
- Full OEM optional lip kit for integra with JDM Front - Offers?
- JDM SRS ITR Steering wheel( airbag was deployed so not perfect - $250 shipped
- j's racing e.g. front lip fiber glass painted red -$250
- EG CF Hatch complete with tail lights only mounted - 350 shipped
-APR CF Mirrors for eg (needs to be re cleared) - $150 shipped
- Azect Integra JDM front eyelids - $300 shipped
- 1 RCI Harness expired believe in 2010 - $50 shipped
- Chase Bays B series tucked clutch line kit BNIB - $50 shipped
Motor
Wastegate
GForce
Weldon
FPR
Precision
id
90mm
Sheepey
DSS
AEM
Twin disk
ALL in
CF Hatch
Clutch line
Azect
Fuel System
Precision gt4294
APR Mirrors
Last edited by flycivicsi; 11-22-2015 at 02:29 PM.
#13
Honda-Tech Member
iTrader: (4)
Join Date: Mar 2003
Location: pleasant hill, ca, usa
Posts: 891
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
Precision 6766 journal bearing, freshly rebuilt with 0 miles from pure turbos. T4 .96ar v band exaust housing
950 ftf or 1000 shipped I accept paypal. send as gift or add 4% fee. Thanks
located in bay area ca.
925.586.seven3seven1
Mike
950 ftf or 1000 shipped I accept paypal. send as gift or add 4% fee. Thanks
located in bay area ca.
925.586.seven3seven1
Mike
#14
Honda-Tech Member
iTrader: (11)
Re: Nov FS thread
parts for sale.
fastest response text me at 316-308-four three six nine.
cp pistons 9:1 comp 81.5 upgraded wrist pins $650 shipped
sls top mount t4 twinscroll with dump tubes 650 shipped
M&W pro 10 ignition with t1 harness and obd2 dizzy 650 shipped
sheepey front mount manifold t4 open 60mm wg flange 800 shipped
fastest response text me at 316-308-four three six nine.
cp pistons 9:1 comp 81.5 upgraded wrist pins $650 shipped
sls top mount t4 twinscroll with dump tubes 650 shipped
M&W pro 10 ignition with t1 harness and obd2 dizzy 650 shipped
sheepey front mount manifold t4 open 60mm wg flange 800 shipped
#15
Honda-Tech Member
Join Date: Jan 2012
Location: Houston
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS thread
BNIB STC TR3030R turbo - $1500
BNIB AEM V2 OBDII - $1100
BNIB Injector Dynamic ID2000 - $850
BNIB T1 trigger kit - $500
Only used parts I have and would like to sell as a whole.
Full race ram horn manifold custom turbo kit, comes with everything
anybody would need to have a complete kit with up pipe and tube.
Intake Manifold also has BDL 72mm throttle body. All for $1900
832-875-1213
BNIB AEM V2 OBDII - $1100
BNIB Injector Dynamic ID2000 - $850
BNIB T1 trigger kit - $500
Only used parts I have and would like to sell as a whole.
Full race ram horn manifold custom turbo kit, comes with everything
anybody would need to have a complete kit with up pipe and tube.
Intake Manifold also has BDL 72mm throttle body. All for $1900
832-875-1213
#16
Honda-Tech Member
Re: Nov FS thread
For Sale
RyWire Civic/Integra/CRX Proportion Valve Relocation Kit
$300 OBO Shipped
Synapse Blow-Off Valve (Includes TiAL Flange Adapter)
$175 OBO Shipped
RyWire Civic/Integra/CRX Proportion Valve Relocation Kit
$300 OBO Shipped
Synapse Blow-Off Valve (Includes TiAL Flange Adapter)
$175 OBO Shipped
#17
Re: Nov FS thread
dont have many posts on this forum but i have 2000+ on bimmerforums and i sold a k20 head to fast guy last week so you can ask him for feedback. legit seller
Reason for selling is I am Switching to a b series setup
K24A2 long block with alternator and karcepts ps/ac delete out of an 06 tsx (was a running engine, never opened)
1000 picked up
Used BWR twin scroll with tial 38 mm wastegates hood exit 3 inch exhaust and wg tubes ceramic coated by tcc not willing to part setup
Purchased from treblic tuned (dhoist)
1250
6266 turbo ball bearing. Turbo is new/ Turbine housing is used because I traded my open scroll for a twin scroll
1000
06 tsx trans with brand new m factory lsd and obx 1-2 built by cunha at clm 3-6 stock tsx gearing
1300 paid 1650 for the build plus the stock trans cost
K tuned swivel thermostat housing comes with fittings for 16 an and an fitting for the other ports as well brand new
125
I will not ship anything!!!!!!!!!!!!!!!
Local pickup in 07001 NJ …. 10 minutes from tristate motorsports/ clm new shop
Cash or paypal
pm me for my number
i took some crappy photos but i can get better ones if someone wants
Reason for selling is I am Switching to a b series setup
K24A2 long block with alternator and karcepts ps/ac delete out of an 06 tsx (was a running engine, never opened)
1000 picked up
Used BWR twin scroll with tial 38 mm wastegates hood exit 3 inch exhaust and wg tubes ceramic coated by tcc not willing to part setup
Purchased from treblic tuned (dhoist)
1250
6266 turbo ball bearing. Turbo is new/ Turbine housing is used because I traded my open scroll for a twin scroll
1000
06 tsx trans with brand new m factory lsd and obx 1-2 built by cunha at clm 3-6 stock tsx gearing
1300 paid 1650 for the build plus the stock trans cost
K tuned swivel thermostat housing comes with fittings for 16 an and an fitting for the other ports as well brand new
125
I will not ship anything!!!!!!!!!!!!!!!
Local pickup in 07001 NJ …. 10 minutes from tristate motorsports/ clm new shop
Cash or paypal
pm me for my number
i took some crappy photos but i can get better ones if someone wants
#19
Honda-Tech Member
iTrader: (8)
Join Date: Oct 2006
Location: PA, USA
Posts: 3,392
Likes: 0
Received 0 Likes
on
0 Posts
FS: SHEEPEY BUILT TWIN SCROLL TURBO MANIFOLD B SERIES 1000WHP INTERCOOLER 4" UPPIPE
BIG BOY PARTS!!!!!!!!!!!
NEW Sheepey Built T4 Twin Scroll Dual 44MVR Gated Top Mount B Series Turbo Manifold - *Just Spent $175 on getting it High Temp Ceramic Coated Black*
4" STAINLESS FASTECH MOTORSPORTS TEARDROP UPPIPE with VBAND CLAMP!
$1150 Shipped for both (Manifold & Uppipe)
NEW FASTECH MOTORSPORTS 1000WHP INTERCOOLER WITH 3.5" PIPING & VIBRANT 3.5" VBAND CLAMP SETUP - TIAL BOV FLANGED
DIMENSIONS - ENDTANK TO ENDTANK 30 1/4" wide by 12.5" high by 4.5" THICK!
PICS ARE ON MY EG HATCH MOCKED UP!
$1050 Shipped
Located in Altoona PA - Any questions please text 8146507263 or pm me!
PAYPAL VERIFIED!
NEW Sheepey Built T4 Twin Scroll Dual 44MVR Gated Top Mount B Series Turbo Manifold - *Just Spent $175 on getting it High Temp Ceramic Coated Black*
4" STAINLESS FASTECH MOTORSPORTS TEARDROP UPPIPE with VBAND CLAMP!
$1150 Shipped for both (Manifold & Uppipe)
NEW FASTECH MOTORSPORTS 1000WHP INTERCOOLER WITH 3.5" PIPING & VIBRANT 3.5" VBAND CLAMP SETUP - TIAL BOV FLANGED
DIMENSIONS - ENDTANK TO ENDTANK 30 1/4" wide by 12.5" high by 4.5" THICK!
PICS ARE ON MY EG HATCH MOCKED UP!
$1050 Shipped
Located in Altoona PA - Any questions please text 8146507263 or pm me!
PAYPAL VERIFIED!
#20
Thread
Thread Starter
Forum
Replies
Last Post