Nov FS Thread
#26
#27
Honda-Tech Member
Join Date: Sep 2009
Location: Charlotte,NC
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS Thread
FJO Injector driver $120
I have an Obd2 and obd1 gsr destributers with msd cap and wires
$120 a pc
gsr msd pro caps $20 apc
OEM Plug Wires $20 a set
Tilton carbon carbon b series clutch $2500
5.9 DSS Axles 10 passes $1300 No hubs
Weld One Pc Rear Wheels 4x100 with tires $1050
I have an Obd2 and obd1 gsr destributers with msd cap and wires
$120 a pc
gsr msd pro caps $20 apc
OEM Plug Wires $20 a set
Tilton carbon carbon b series clutch $2500
5.9 DSS Axles 10 passes $1300 No hubs
Weld One Pc Rear Wheels 4x100 with tires $1050
Last edited by PRO1; 11-20-2014 at 07:24 PM.
#28
Honda-Tech Member
Join Date: May 2002
Location: Deutschland, Germany
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS Thread
I'm selling the below items because I do not need it anymore. I would like to sell it as a whole kit! Nothing was used for more then 350miles. T1 Trigger is new, Sensors and Wideband are all brand new! Everything is Plug and Play for OBD2a Hondas! I bought everything new for over $5000. Only asking $3000. I'm willing to take offers, but please be reasonable.
1.AEM ECU EMS 2 PN:30-6060 OBD2a
2.AEM Twin fire Ignition
3.AEM Serial Gauge
4.AEM Boost , EGT , Oilpressure , Oiltemperatur Gauge
5.CBR Coils 4x
6.AEM Coils 4x
7.AEM EPM (EnginePositionModul)
8.T1R Camtrigger Black
9.AEM Map Sensor
10.AEM Boostsolenoid
11.AEM Wideband Sensor
12.Rywire Milspec Harness for AEM ECU, AEM Twin Fire, Mapsensor,T1R Camtrigger/ AEM EPM with 4x1000Ids plugs and 4x2000Ids plugs
1.AEM ECU EMS 2 PN:30-6060 OBD2a
2.AEM Twin fire Ignition
3.AEM Serial Gauge
4.AEM Boost , EGT , Oilpressure , Oiltemperatur Gauge
5.CBR Coils 4x
6.AEM Coils 4x
7.AEM EPM (EnginePositionModul)
8.T1R Camtrigger Black
9.AEM Map Sensor
10.AEM Boostsolenoid
11.AEM Wideband Sensor
12.Rywire Milspec Harness for AEM ECU, AEM Twin Fire, Mapsensor,T1R Camtrigger/ AEM EPM with 4x1000Ids plugs and 4x2000Ids plugs
#31
Honda-Tech Member
iTrader: (5)
Re: Nov FS Thread
Few B series parts i have no use for any more
Located in NY Willing to ship!
Full race Top Mount Turbo manifold
T4 with dual 44mm gate flanges
Price: $
850obo
DSC_1016 by crazyjetsfan22, on Flickr
DSC_1018 by crazyjetsfan22, on Flickr
DSC_1019 by crazyjetsfan22, on Flickr
DSC_1020 by crazyjetsfan22, on Flickr
84.5MM bores 10.8:1 compression
Never used were mounted to rods but rods were sold separately.
Few scratches on top from sitting in storage but nothing deep
Price: $450
DSC_1313 by crazyjetsfan22, on Flickr
DSC_1314 by crazyjetsfan22, on Flickr
DSC_1316 by crazyjetsfan22, on Flickr
DSC_1317 by crazyjetsfan22, on Flickr
DSC_1318 by crazyjetsfan22, on Flickr
DSC_1319 by crazyjetsfan22, on Flickr
Custom Down pipe for Top mount.
With Vband on both sides
Price:$200obo
DSC_1021 by crazyjetsfan22, on Flickr
DSC_1022 by crazyjetsfan22, on Flickr
DSC_1023 by crazyjetsfan22, on Flickr
DSC_1024 by crazyjetsfan22, on Flickr
DSC_1025 by crazyjetsfan22, on
Flickr
Intercooler with Vibrant end tanks
Used , the bottom most row is damaged from car hitting something.
Price: $150
DSC_1026 by crazyjetsfan22, on Flickr
DSC_1027 by crazyjetsfan22, on Flickr
DSC_1028 by crazyjetsfan22, on Flickr
DSC_1029 by crazyjetsfan22, on Flickr
Intercooler piping
It came off an eg with full race manifold and the above posted intercooler
Price:$150
DSC_1030 by crazyjetsfan22, on Flickr
DSC_1031 by crazyjetsfan22, on
Flickr
Bare GSR Head.
The head was sandblasted and cleaned and cut
Comes with all that is shown.
Price:$200obo
DSC_0980 by crazyjetsfan22, on Flickr
DSC_0981 by crazyjetsfan22, on Flickr
DSC_0982 by crazyjetsfan22, on Flickr
DSC_0983 by crazyjetsfan22, on Flickr
DSC_0984 by crazyjetsfan22, on Flickr
DSC_0985 by crazyjetsfan22, on Flickr
DSC_0987 by crazyjetsfan22, on Flickr
DSC_0988 by crazyjetsfan22, on Flickr
DSC_0989 by crazyjetsfan22, on Flickr
DSC_0990 by crazyjetsfan22, on Flickr
ARP Head studs (b series)
ARP 208-4303 HEAD STUD KIT
Never used just opened up the box.
Price :$100
DSC_0991 by crazyjetsfan22, on Flickr
DSC_0992 by crazyjetsfan22, on Flickr
Located in NY Willing to ship!
Full race Top Mount Turbo manifold
T4 with dual 44mm gate flanges
Price: $
850obo
DSC_1016 by crazyjetsfan22, on Flickr
DSC_1018 by crazyjetsfan22, on Flickr
DSC_1019 by crazyjetsfan22, on Flickr
DSC_1020 by crazyjetsfan22, on Flickr
84.5MM bores 10.8:1 compression
Never used were mounted to rods but rods were sold separately.
Few scratches on top from sitting in storage but nothing deep
Price: $450
DSC_1313 by crazyjetsfan22, on Flickr
DSC_1314 by crazyjetsfan22, on Flickr
DSC_1316 by crazyjetsfan22, on Flickr
DSC_1317 by crazyjetsfan22, on Flickr
DSC_1318 by crazyjetsfan22, on Flickr
DSC_1319 by crazyjetsfan22, on Flickr
Custom Down pipe for Top mount.
With Vband on both sides
Price:$200obo
DSC_1021 by crazyjetsfan22, on Flickr
DSC_1022 by crazyjetsfan22, on Flickr
DSC_1023 by crazyjetsfan22, on Flickr
DSC_1024 by crazyjetsfan22, on Flickr
DSC_1025 by crazyjetsfan22, on
Flickr
Intercooler with Vibrant end tanks
Used , the bottom most row is damaged from car hitting something.
Price: $150
DSC_1026 by crazyjetsfan22, on Flickr
DSC_1027 by crazyjetsfan22, on Flickr
DSC_1028 by crazyjetsfan22, on Flickr
DSC_1029 by crazyjetsfan22, on Flickr
Intercooler piping
It came off an eg with full race manifold and the above posted intercooler
Price:$150
DSC_1030 by crazyjetsfan22, on Flickr
DSC_1031 by crazyjetsfan22, on
Flickr
Bare GSR Head.
The head was sandblasted and cleaned and cut
Comes with all that is shown.
Price:$200obo
DSC_0980 by crazyjetsfan22, on Flickr
DSC_0981 by crazyjetsfan22, on Flickr
DSC_0982 by crazyjetsfan22, on Flickr
DSC_0983 by crazyjetsfan22, on Flickr
DSC_0984 by crazyjetsfan22, on Flickr
DSC_0985 by crazyjetsfan22, on Flickr
DSC_0987 by crazyjetsfan22, on Flickr
DSC_0988 by crazyjetsfan22, on Flickr
DSC_0989 by crazyjetsfan22, on Flickr
DSC_0990 by crazyjetsfan22, on Flickr
ARP Head studs (b series)
ARP 208-4303 HEAD STUD KIT
Never used just opened up the box.
Price :$100
DSC_0991 by crazyjetsfan22, on Flickr
DSC_0992 by crazyjetsfan22, on Flickr
Last edited by crazyjetsfan22; 11-25-2014 at 09:18 AM.
#32
Honda-Tech Member
Join Date: Apr 2008
Location: turbo land
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS Thread
hey Honda-tech up forsale
two Tial 38mm mvs vband wastegates with dyno time
Includes extra springs both clamps banjos port plugs and firing ring
im asking $500 for the pair shipped $250 each one buyer pays shiping and paypal fees
Tial 50mm bov with weld on flange , O-ring seal and v band clamp $200 shipped
two Tial 38mm mvs vband wastegates with dyno time
Includes extra springs both clamps banjos port plugs and firing ring
im asking $500 for the pair shipped $250 each one buyer pays shiping and paypal fees
Tial 50mm bov with weld on flange , O-ring seal and v band clamp $200 shipped
#33
Honda-Tech Member
Join Date: Dec 2008
Location: Florida
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS Thread
hey Honda-tech up forsale
two Tial 38mm mvs vband wastegates with dyno time
Includes extra springs both clamps banjos port plugs and firing ring
im asking $500 for the pair shipped $250 each one buyer pays shiping and paypal fees
Still have the tial 44s?
Tial 50mm bov with weld on flange , O-ring seal and v band clamp $200 shipped
two Tial 38mm mvs vband wastegates with dyno time
Includes extra springs both clamps banjos port plugs and firing ring
im asking $500 for the pair shipped $250 each one buyer pays shiping and paypal fees
Still have the tial 44s?
Tial 50mm bov with weld on flange , O-ring seal and v band clamp $200 shipped
#35
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2007
Location: 1
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS Thread
Following for sale from project car. Prices listed are shipped and payment via paypal or EMT. I can be contacted at 250-612-7697 or demersmp@gmail.com its Matt.
CNC design 5th gear handcuff for Bseries. Never ran used in mock up only. $130 shipped
Crower 404 cams and black AEM cam gears for B series non vtec. Good shape ready to make some top end power.
$300 shipped
Mfactory 4.0 final drive- Sold!
Complete B series ignition setup. Summit racing CDI box, Crane PS92N coil, MSD pro cap and wires, Send It Racing Ignitor bypass box , B18 distributor and all wiring pre made along with mounting brackets for ignition box/coil.
$285 shipped
CNC design 5th gear handcuff for Bseries. Never ran used in mock up only. $130 shipped
Crower 404 cams and black AEM cam gears for B series non vtec. Good shape ready to make some top end power.
$300 shipped
Mfactory 4.0 final drive- Sold!
Complete B series ignition setup. Summit racing CDI box, Crane PS92N coil, MSD pro cap and wires, Send It Racing Ignitor bypass box , B18 distributor and all wiring pre made along with mounting brackets for ignition box/coil.
$285 shipped
Last edited by 90dxhmt; 11-25-2014 at 08:10 AM. Reason: more info added
#37
Honda-Tech Member
Join Date: Apr 2007
Location: Madison, WI, USA
Posts: 875
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS Thread
Parting out my CRX, lots of high quality parts and 80% of them have less than 100 miles.
I can get more pictures, unfortunately I lost most of my pictures when i got a new phone.
Located South of Madison Wi, best way to get ahold of me is by phone as i dont check honda-tech as much anymore 608-219-5254
**GSR Trans- $1000**
------Bryanbuilt gsr
------New syncrhos, cleaned
------Mfactory LSD diff
***Twin Disc Clutch $1000**
------Clutchmasters FX750 custom
------Same clutch in Dynamic Performance drag car
------retails for $1300
**B16 Head $750**
------Manley Valves,Springs and retainers
-----(80-90lb seat pressure)
------Gsr cams with skunk2 gears
-------all headwork has less than 100 miles
**Traction bar $220**
------k tuned traction bar
**Turbokit $2000**
------♢AFI turbo kit♢
-------AFI ramhorn manifold
-------Garrett 60-1 turbo
-------Precision wastegate
-------Tial blowoffvalve
-------3" charge pipe
-------Dual backdoor intercooler
--------Bump couplers and t bolt clamps
--------4 stainless hood exit
-------vband
--------Sandwich plate with oil feed
--------AN oil return
**Radiator $180**
--------Fluidyne radiator with AN radiator hoses
-------Comes with thermostat housing and outlet on head(welded AN ----fittings)
**Wheels/tires $650**
-------Konig 15x8.25 LIGHT!
-------Dunlop Direzza rear 205/50
-------MH 24.5" slicks
--------BWR lug nuts
**Coilovers $450**
-------Koni yellow/ground control coilovers
**Camber/Caster kits $250**
------Skunk2 front upper camber kits
-------BWR rear camber/caster
**VC w/ Catch $220**
-------10 drain backs with fitings
-------charcoal canister blockoff seal
**Fuel System $450**
-------Fullblown dual hanger with 2 walbro 255 pumps
-------hanger comes installed in an eg gastank
-------10AN feed line, -6AN return with fittings
--------Inline e85 fuel filter
--------fuel lab fuel pressure regulator
**Linkage $100**
-------Hasport B series conversion in EF
**Mounts $200**
-------Innovative B series mounts (EF)
**Rods $200**
--------Scat b16 H beam rods
--------ARP bolts
**Pistons $300**
-------Custom Ross pistsons
--------HD pin
--------83mm bore size
**TB tensioner $120**
--------Vibrant tensioner
Sorry about the lack of pictures of everything, just a lot of stuff.
**Moroso Oil Pan $100**>
I can get more pictures, unfortunately I lost most of my pictures when i got a new phone.
Located South of Madison Wi, best way to get ahold of me is by phone as i dont check honda-tech as much anymore 608-219-5254
**GSR Trans- $1000**
------Bryanbuilt gsr
------New syncrhos, cleaned
------Mfactory LSD diff
***Twin Disc Clutch $1000**
------Clutchmasters FX750 custom
------Same clutch in Dynamic Performance drag car
------retails for $1300
**B16 Head $750**
------Manley Valves,Springs and retainers
-----(80-90lb seat pressure)
------Gsr cams with skunk2 gears
-------all headwork has less than 100 miles
**Traction bar $220**
------k tuned traction bar
**Turbokit $2000**
------♢AFI turbo kit♢
-------AFI ramhorn manifold
-------Garrett 60-1 turbo
-------Precision wastegate
-------Tial blowoffvalve
-------3" charge pipe
-------Dual backdoor intercooler
--------Bump couplers and t bolt clamps
--------4 stainless hood exit
-------vband
--------Sandwich plate with oil feed
--------AN oil return
**Radiator $180**
--------Fluidyne radiator with AN radiator hoses
-------Comes with thermostat housing and outlet on head(welded AN ----fittings)
**Wheels/tires $650**
-------Konig 15x8.25 LIGHT!
-------Dunlop Direzza rear 205/50
-------MH 24.5" slicks
--------BWR lug nuts
**Coilovers $450**
-------Koni yellow/ground control coilovers
**Camber/Caster kits $250**
------Skunk2 front upper camber kits
-------BWR rear camber/caster
**VC w/ Catch $220**
-------10 drain backs with fitings
-------charcoal canister blockoff seal
**Fuel System $450**
-------Fullblown dual hanger with 2 walbro 255 pumps
-------hanger comes installed in an eg gastank
-------10AN feed line, -6AN return with fittings
--------Inline e85 fuel filter
--------fuel lab fuel pressure regulator
**Linkage $100**
-------Hasport B series conversion in EF
**Mounts $200**
-------Innovative B series mounts (EF)
**Rods $200**
--------Scat b16 H beam rods
--------ARP bolts
**Pistons $300**
-------Custom Ross pistsons
--------HD pin
--------83mm bore size
**TB tensioner $120**
--------Vibrant tensioner
Sorry about the lack of pictures of everything, just a lot of stuff.
**Moroso Oil Pan $100**>
#39
Honda-Tech Member
Re: Nov FS Thread
Used exedy b series twin disc. Came off my all motor h2b. Never gave me any issues. Will need new discs soon but works just fine as is. Just purchased a brand new clutch and looking to make some money back. Asking $500 shipped plus paypal fees. Best contact is by email jaywest10@gmail.com
Have more pictures to send by email just not able to upload them for some reason
Also selling 13x8 bogart wheels. Fronts and rears without tires. Asking $750 plus shipping and paypal fees. Located in south florida. Can bring them to orlando on Dec 6/7th.
Have more pictures to send by email just not able to upload them for some reason
Also selling 13x8 bogart wheels. Fronts and rears without tires. Asking $750 plus shipping and paypal fees. Located in south florida. Can bring them to orlando on Dec 6/7th.
#40
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2007
Location: Norcal, usa
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS Thread
GForce Dog Box with the 4.33 final, with WaveTrac 28 spline LSD and DSS Pro level axles
Welded casing, Speedfactory gear selector, with Gforce welded fork, will come with 8 GForce gear oil for the box
Threw this box was only tested on a 270whp all motor setup with 3 hits, never seen any harsh abuse, shifts like a beauty, Gears are near new
asking 9000 for box, lsd, or axles
or dog box with no lsd or axles 6000
DSS pro axles with lsd 3000
Gforce b series long shifter (new) 1250
ID2200 injectors with clips 750
T1 cam trigger (2 bracket, 2 sensor, 1 bracket was custom to fit a topmount turbo) with harness has no cam gear asking 400
Crane cams vtec single lobe cams with ferrea rockers asking 1000
Skunk2 ultra with 90mm tb 900
M&W pro14 with plugs 650
weldon fuel pump 2035
asking 650
Precision turbo 7275 BB billet turbo, this turbo has its wheel fins clipped by Miller awhile back asking 2000
Tail 60mm waste gate 350
Areomotive A1000 red fuel pump with inline filter and 3 new filter
asking 250 obo plus shipping & paypal fees
custom EF traction bar (4 point contact from LCA)
asking 300 plus
lca to front traction bar and lca to under chasis
Fast Brake willwood drag brake setup
never ran just mounted
asking 460 shipped plus fees (pending sale)
Welded casing, Speedfactory gear selector, with Gforce welded fork, will come with 8 GForce gear oil for the box
Threw this box was only tested on a 270whp all motor setup with 3 hits, never seen any harsh abuse, shifts like a beauty, Gears are near new
asking 9000 for box, lsd, or axles
or dog box with no lsd or axles 6000
DSS pro axles with lsd 3000
Gforce b series long shifter (new) 1250
ID2200 injectors with clips 750
T1 cam trigger (2 bracket, 2 sensor, 1 bracket was custom to fit a topmount turbo) with harness has no cam gear asking 400
Crane cams vtec single lobe cams with ferrea rockers asking 1000
Skunk2 ultra with 90mm tb 900
M&W pro14 with plugs 650
weldon fuel pump 2035
asking 650
Precision turbo 7275 BB billet turbo, this turbo has its wheel fins clipped by Miller awhile back asking 2000
Tail 60mm waste gate 350
Areomotive A1000 red fuel pump with inline filter and 3 new filter
asking 250 obo plus shipping & paypal fees
custom EF traction bar (4 point contact from LCA)
asking 300 plus
lca to front traction bar and lca to under chasis
Fast Brake willwood drag brake setup
never ran just mounted
asking 460 shipped plus fees (pending sale)
Last edited by 209lsr_ly; 11-30-2014 at 12:26 PM.
#42
Honda-Tech Member
Join Date: Apr 2010
Location: Richmond,VA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nov FS Thread
Name: Joe
Location: Richmond, VA
Contact: 804-337-8376
For Sale: CP Pistons 83mm 9.0:1 compression. Standard wrist pin. With fresh high temperature ceramic top coating and Molly skirt coating. Includes all locks, wrist pins, new ring set and spec sheet. Three pistons are used (200 miles) and one is new. Used pistons were shipped to CP and hardness checked by a CP engineer before coating. Will include all documentation. - $350
For sale: Used GSR GRP aluminum rods with ARP 2000 bolts for a .866 or 22mm wrist pin. $275
Call or text 804-337-8376
Location: Richmond, VA
Contact: 804-337-8376
For Sale: CP Pistons 83mm 9.0:1 compression. Standard wrist pin. With fresh high temperature ceramic top coating and Molly skirt coating. Includes all locks, wrist pins, new ring set and spec sheet. Three pistons are used (200 miles) and one is new. Used pistons were shipped to CP and hardness checked by a CP engineer before coating. Will include all documentation. - $350
For sale: Used GSR GRP aluminum rods with ARP 2000 bolts for a .866 or 22mm wrist pin. $275
Call or text 804-337-8376
#45
Re: Nov FS Thread
i have for sale 2 brand new in box sets of MFactory`s FD!!!
-MF-TRS-02B47 4.785 FD for B16a2,b18a/b. $495 firm
-MFactory MF-TRS-02B47A 4.785 FD for b18c/b16b $495 firm
PLEASE NO OFFERS LESS,THE PRICE IS FIRM, RETAIL EACH FD IS $599 SHIPPED any questions text me 818-395-8352 LAS VEGAS
-MF-TRS-02B47 4.785 FD for B16a2,b18a/b. $495 firm
-MFactory MF-TRS-02B47A 4.785 FD for b18c/b16b $495 firm
PLEASE NO OFFERS LESS,THE PRICE IS FIRM, RETAIL EACH FD IS $599 SHIPPED any questions text me 818-395-8352 LAS VEGAS
#46
Re: Nov FS Thread
Chassis:
2000 Honda Civic Ek Coupe
Source Racing Wide Front End
Vis Carbon-Fiber Hood And Trunk
Full 10 Point Roll-Cage That Is Certified
With Parachute And Window Net
Wheels And Suspension:
Front:
Belak Industries 15x9 With Arp Hardware
Mickey Thompson 275/50/r15
Rears:
Belak Industries 15x7 With Arp Hardware
Nitto 205/50/r15
Omni Power Full Body Coilovers
K-tuned Full Traction Bar
Electronics:
AEM Version-2 Ecu
AEM Digital Wide-Band
Auto-Meter Analog Boost Gauge
Auto-Meter Pro Series Shift Light
Rear Speed Sensor
Mac Electronic Boost Solenoid
Xs Power Battery Mounted in Front
Hybird Racing K-Series Cabin Harness
Drivetrain:
PPG Dog Box Tranny
Competition Triple Disc Clutch
Drive-Shaft Shop 5.9 Axles And Hubs With Extended Studs
Hybird Racing Shifter Box And Cables
Motor:
Erl K20 Sleeved Block
Carillo Rods With Upgraded Rod Bolts
Cp Pistons With Upgraded Wrist Pins
Full Ferrea Valve Train
Prayoonto Racing Intake Manifold
Ross Racing 90mm Throttle Body
Hasport Solid Billet Motor Mounts
Turbo Kit:
Sheepey t4 Divided Manifold That's Been Ceramic Coated
T4 Precision 6768 Journal Bearing Turbo With Back Housing Ceramic Coated
Twin 44mm Tial Waste Gates Valve Body's Ceramic Coated
Tial Bov
Treadstone 4-inch intercooler
Fuel:
Weldon Fuel Pressure Regulator
Id 2000cc Injectors
Power Rev Racing Fuel Rail
Fuel Feed -10an Black Braided Lines From Front To Back
Fuel Return -6an Black Braided Lines From Front To Back
Full Blown Dual Pump Hanger With Twin 340Lph Pumps
Misc:
Skunk 2 Rear Lower Control Arms
Golden Eagle Rear Bumper Defuser
Oem Optional EM1 Rear Li
Si Rear Seats
Pioneer Radio
Kicker Ks series Speakers
Kirkey Aluminum Bucket Seat (Drivers-Side)
Si Cluster
Asking $$28,000$$ obo
(786)210-1759
Car Was Completely Built From Top To Bottom By TD-Autowerks In South Florida
2000 Honda Civic Ek Coupe
Source Racing Wide Front End
Vis Carbon-Fiber Hood And Trunk
Full 10 Point Roll-Cage That Is Certified
With Parachute And Window Net
Wheels And Suspension:
Front:
Belak Industries 15x9 With Arp Hardware
Mickey Thompson 275/50/r15
Rears:
Belak Industries 15x7 With Arp Hardware
Nitto 205/50/r15
Omni Power Full Body Coilovers
K-tuned Full Traction Bar
Electronics:
AEM Version-2 Ecu
AEM Digital Wide-Band
Auto-Meter Analog Boost Gauge
Auto-Meter Pro Series Shift Light
Rear Speed Sensor
Mac Electronic Boost Solenoid
Xs Power Battery Mounted in Front
Hybird Racing K-Series Cabin Harness
Drivetrain:
PPG Dog Box Tranny
Competition Triple Disc Clutch
Drive-Shaft Shop 5.9 Axles And Hubs With Extended Studs
Hybird Racing Shifter Box And Cables
Motor:
Erl K20 Sleeved Block
Carillo Rods With Upgraded Rod Bolts
Cp Pistons With Upgraded Wrist Pins
Full Ferrea Valve Train
Prayoonto Racing Intake Manifold
Ross Racing 90mm Throttle Body
Hasport Solid Billet Motor Mounts
Turbo Kit:
Sheepey t4 Divided Manifold That's Been Ceramic Coated
T4 Precision 6768 Journal Bearing Turbo With Back Housing Ceramic Coated
Twin 44mm Tial Waste Gates Valve Body's Ceramic Coated
Tial Bov
Treadstone 4-inch intercooler
Fuel:
Weldon Fuel Pressure Regulator
Id 2000cc Injectors
Power Rev Racing Fuel Rail
Fuel Feed -10an Black Braided Lines From Front To Back
Fuel Return -6an Black Braided Lines From Front To Back
Full Blown Dual Pump Hanger With Twin 340Lph Pumps
Misc:
Skunk 2 Rear Lower Control Arms
Golden Eagle Rear Bumper Defuser
Oem Optional EM1 Rear Li
Si Rear Seats
Pioneer Radio
Kicker Ks series Speakers
Kirkey Aluminum Bucket Seat (Drivers-Side)
Si Cluster
Asking $$28,000$$ obo
(786)210-1759
Car Was Completely Built From Top To Bottom By TD-Autowerks In South Florida
#47
Re: Nov FS Thread
2000 civic for sale everyday street car
500 hp
K-series swap
Turbocharged (precision turbo)
Hasport mounts
Fluidyne aluminum radiator
precision intercooler
full stainless steel v band exhaust
1000 cc injectors and fuel pump
4bar hondata map sensor
k-pro engine manegement computer
full suspension (skunk 2 coilovers, lower control arms with brace)
Twin disc clutch
etc.
too much to list
Please contact for more info
10k obo
the car has no rust at all it just needs a bumper and fender other than that the car is fairly mint condition
500 hp
K-series swap
Turbocharged (precision turbo)
Hasport mounts
Fluidyne aluminum radiator
precision intercooler
full stainless steel v band exhaust
1000 cc injectors and fuel pump
4bar hondata map sensor
k-pro engine manegement computer
full suspension (skunk 2 coilovers, lower control arms with brace)
Twin disc clutch
etc.
too much to list
Please contact for more info
10k obo
the car has no rust at all it just needs a bumper and fender other than that the car is fairly mint condition
Thread
Thread Starter
Forum
Replies
Last Post