sohctodohc

Hey getting ready to mount our digital dash, was curious if there is a place that makes a plate to mount to where the factory cluster mounted or if people are making their own?

Also pics for ideas wouldn't hurt

Thanks!

NWDyno

I have my motec dash mounted on a carbon fiber plate. This particular dash has 4 threaded studs on the rear of it for mountin.

AZ_CIVIC

iTrader: (1)

I've have been doing a ton of searching myself and it is very limited. I have seen a carbon fiber piece that is molded for the AIM dash but it doesn't look like it just fits to the plastic bezel. It was a sqare sheet that you would have to cut and somehow either screw of mold in somehow.

All the other things I have seen were just people making their own.

sohctodohc

That's kind of what I was figuring, my brother and I have been staring the stock cluster down the past couple days and haven't came up with much yet. We are going to try and attempt to re use factory mounting points for the cluster. Block it off then make some standoffs to get it as close to the back of the steering wheel as possible.

redGSRguy

You can mount it into the bezel trim. My buddy just made some brackets and screwed it in.

SPOOLINmatt

plastic weld and a band saw or belt sander and a little time.

jdm inc

iTrader: (11)

Here's how I mounted mine

seelback

this is how mine was done.

https://honda-tech.com/engine-manage...ng-ek-3203138/

SharkRacer

^^^That is sick! Me want.


http://www.ebay.com/itm/Racepak-IQ3-Flat-Mounting-Panel-Brushed-Aluminum-ABS/251832523864?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20131003132420%26meid%3Dcb0d2628a2a1496f865f6051ce381e83%26pid%3D100005%26rk%3D4%26rkt%3D6%26sd%3D251866104712&rt=nc
http://www.ebay.com/itm/Racepak-IQ3-Flat-Mounting-Panel-Black/251866104712?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20131003132420%26meid%3D8daa91454718454fb82db719117d38d8%26pid%3D100005%26rk%3D3%26rkt%3D6%26sd%3D251866565157&rt=nc

seelback

just find a local specialist to do it for you but its pricey to have something like this done, but the results are well worth it.