When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts! 2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it. 3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned 4) NO WTB ADS! 5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE 6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
Location: NC
Contact: Tim (336-932-2023)
Price: $1000 OBO
I had the custom wiring harness made back in 2014 by the best in the business Joel Levy. It does not include a firewall disconnect. It was designed to pass through heater core location.
The wiring harness has only been test fitted.
OBD1 92-95 Engine Harness
Provisions for fuel pressure, oil pressure, wideband, a few 0v/5v fly leads.
CP Pistons 9:1 81.5 upgraded wristpin 600 shipped
Sheepey ic $800 shipped
single 044s $125 shipped with fittings
Borg Warner turbo 950 Obo
Dave fry wing $200 shipped
Super tech valves missing two exhaust $150
purple cam sea tpr $25 shipped
AEM cam gear new $175 shipped
-4 feed line 35 shipped
all buyers pleas pay pp fee.
thank you
For sale Carrillo rods pro-A beam 421grams X rod,comes with carrillo bolts for LS B18A/B and B20's in exellent condition,super low miles around 25-30 miles,the best super strong and lightweight allmotor rods on the market!!! absolutely nothing wrong with them $590 shipped
For sale brand new 100% authentic dual bosch 044 fuel pumps hold up 850whp+ $375 shipped. Any questions via inbox or msg (702)-808-9302
Brian Crower Stage 3 N/A Cams for B series vtec heads
These cams are typically $500 new. They've had roughly 3-4500k miles.
No rust/dents/imperfections.
Lookin for $400 OBO
ONLY trades are for ID 1000cc injectors
F/S SKUNK 2 GSR INTAKE manifold black edition. In good condition.
Selling for $220.
Comes with oem throttle body and tps NO MAP SENSOR
Selling my Injector Dynamics 725CC injectors for $375 OBO to upgrade to 1000cc+ ID injectors.
With that said I'm mainly looking to sell but will trade for 1000cc IDs(I add a little cash)
Location is Hampton VA. Willing to drive up to an hour away to meet up
Few items for sale. Read description of each item, I try to disclose history of parts and any issues (if found during inspection). All in working order. Only selling because I went J series and no longer need these parts.
All prices are Firm and without shipping and PayPal fees. Add 3% for PayPal
Your can PM me on here or text 580-382-1661.
Serious Inquiries only!
Drive Shaft Shop 5.9 B series Axles. Used for ½ season. 2 dyno sessions and a hand full of passes. The axles have been sitting for a few years inside the house. So the boots are still in great condition, but there is some surface rust on the metal. Hubs can be included if needed. If not, Ill knock off $100. Otherwise, $1200
Supertech springs and retainers B series. Ttitanium retainers and 85lbs dual springs. Springs are brand new, never installed. Retainers are used for a few seasons, one got damaged and replaced with a brand new one but never installed. - Sold
Last edited by hondaracing84; 05-27-2016 at 06:16 AM.
GM 3 bar map sensor comes with pigtail harness (not pictured) - 30 shipped
Blox Purple aluminum 4" Vstack with clamps and coupler - 50 shipped
black GSR steering wheel with airbag came off my 98 - 80
black GSR passenger side airbag came off my 98 - 80
5 gallons of ERC A8D (same as C16) - 60 picked up only!
2004 Honda Accord coupe headlights no broken tabs - 80
MISC Honda/Acura air boxes intakes etc... - Make offers
I have for sale is my Garrett intercooler and charge pipe setup. This entire setup was fabricated by Nick at JDL, I used Garrett Intercooler Core 703520-6011 which is about $450 just for the intercooler core. As you can see this is a back door setup with 2.5 inch charge piping, this has also been fabricated using Vibrant VanJen clamps which alone cost about $100 a piece and are way better than any other clamp setup. To sweeten the deal I can also include the Integra Type R throttle body that will finish up the setup, essentially this is a bolt up setup and will take care of your intercooler, throttle body and charge pipe needs. This setup has supported over 900whp and is a very efficient and well-built setup tig welded by Nick and is a direct bolt on setup.
Included is the intercooler, charge pipe, Vibrant VanJen Clamps and Type R throttle body setup. $850 OBO
Ported S cover
1.15 coated T4 hotside
Fresh back from rebuild/balance with CHRA rebuilt and new gen2 wheel installed. 0 miles since went to a 6870
Was on a RB26 for a couple years, started to poot smooke here and there so sent it back and went with the 6870 to make more power. Made 830 on the RB at 33 PSI
Turbo is left turbo in piuck sith the 90 welded on. Its MINT and clean as new.
Parts are brand was taken out of the box just to fit in the Car and to fabricate dump tubes.
-S372 borg warner Turbo $900
-MVR red 44mm tial wg $320 each or both for $620
-T4 BWR twinscroll top mount manifold with dump tubes $850
Text or call me for more info 925-325-5005
SFWD motor for sale I have receipts of everything done to them this motor only has a few dyno sessions I wasn't able to finsh the car so rather then it just sit id rather let someone else injoy it the most power it made was one 890hp pull I ran out of full so we installed a 8 injector setup and never got to finish it motor was run with brad penn oil price is 4500 see pics below
7/10/2016 price drop 4000 pick up
Last edited by ls_on_boost; 07-10-2016 at 10:30 AM.
MY CONTACT NUMBER>>!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
TIM 561-644-3876 USE IT!!!!!!!!!
NOTICE SOME PARTS HAVE BEEN SOLD .
some of you might remember this project so here it is all laid out for sale.
almost every part is brand new never been used or ran except a few small misc parts.
IF U HAVE ANY QUESTIONS U CAN CALL ME..!! ( talking instead if text is way faster & easier to communicate IJS). TIM 561-644-3876
I am willing to do package deals on basically everything, SHORT BLOCK IS SOLD .
COMPLETE HEAD LEFT ONLY..
The list.
chassis shell. comes with front & factory tail lights all harnesses & interior (doors are quick release) 1,500$
jojo front end.(6 zeus comes off in 1pc) 500$
front control system with
(ceramic wheel bearings & traction bars) 800$
custom rear end ( willwood light weight) 650$ SOLD
Strange suspension 850$ SOLD
rims & tires. front & rear(exospeed 15,s 26x10) 2,200$
rear wing system 250$
Strang chute(blue) & mechanical release 750$
meziere water pump set-up 320$
I AM WILLING TO DO A DEAL ON THE ROLLING CHASSIS with parachute & all parts u see in the pic. minus rear custom arms & shocks, they are sold. but can get factory stuff back on.
Tim 561-644-3876
engine was built by TEX BRE Motorsports.
BLOCK IS SOLD>
Head
GSR head 5 axes CNC port
RARE MOROSO valve cover..
Ferrea roller system.
BRE custom Ferra turbo cams, valves, EVERYTHING.all the goodies...
turbo system Setup.
PT 7275-B Billet wheel & Ball bearing. 2,000$ SOLD
dual Tial 44MM MV-R gates. 550$ SOLD 1 ::: 1 left
custom manifold (Backpurged) 500$ SOlD
Custom BMC intake. 1,500$
misc parts list
Aem data gauge 100$
Sparco seats 250$
sparco harnesses 150$
dble gauge holder 75$
Tach Auto meter 100$
Aem fuel rail with line & guage 130$ shipped
anythying else u see in the pics just ask , lol
race car / wana be sfwd part out. tons of parts off my car after a terrible accident
Will update every 24 hours with new pricing and parts
For the most part I would prefer local pick up here in Baltimore md 21222 where I live. Not sure I have the time or availability to run to shipping stores daily with large parts nor do I have the boxes tape etc but I will ship if you pay shipping and materials
Car was my pride and joy. And use to be the charm city tuning 67mm record holder The cage saved my life. Not sure what happened at the accident because I don't remember it. But now I'm ready to sell it all and move on
Pleas look through pics Car accident was most rear end damage and rear driver side with some driver door damage. There is no damage to engine or any engine parts The Front end bumper and fender are destroyed so the front end is not for sale , seats are damaged and steering wheel is damaged other then that most everything I list below is up for grabs
A lot of this stuff has less then 5000 miles. Car was just built December of 2015 till now
Thanks for interest and looking here's the list :
IF YOU DO NOT SEE A PART ON THIS LIST THEN THAT MEANS IT HAS SOLD ALREADY.
I ONLY HAVE WHATS IN THE LIST BELOW. NOT EVERYTHING THAT IS IN THE PICTURES. STUFF HAS SOLD $$
-edelbrock victor x intake manifold. For gsr head. Perfect shape with custom powder coat. 65mm throttle body , Hondata 4 bar map sensor with newer tps as well. Also has idle air control valve etc will come with hondata intake manifold gasket and throttle body gasket 375$ complete setup ready to go (will separate stuff if you want stuff separated for the right price ) I have 200$ alone in powder coat on the manifold plus 100$ for map sensor plus price for the other stuff itself. Seems like a deal to me
-gsr cylinder head off the lsvtec engine out of the car. Ferrea 6000 complete valve set just recently put in with a 5 angle valve job by machine shop in Baltimore md super tech turbo valve train 85lb, just recently bought and installed as well. Supertech valve stem seals just put in recently Skunk 2 Lost motion assemblies Complete running perfect head. Made 760+hp with it. No cams or cam gears included. No dizzy included and no valve cover included as they are all being sold separately Will have speed factory titanium hardware for exhaust in the head. And come with vtec solenoid and all sensors , bolts etc -650$
(I have 800$ alone in valve train purchase valve job by machine shop and install. So pretty much getting head for free if you look at it that way )
- Borg Warner s366sxe turbo super core billet wheel with .91 t4 divided exhaust housing with marmon flange. With black turbo blanket. Like new maybe 1000 miles have reciept I purchased new . -750$ with turbo blanket
-Hondata boost controller 3 port hondata brand with push lok hose and fittings 80$
-alum half size Radiator mishimoto brand with mishimoto slim fan and cooling fan plate with a custom chase bays reservoir with black paint with push lock line and fittings and custom water neck on radiator for clearance of up pipe -280$ for everything
-oem alternator obd2. Have 2 of these
-oem starter have 2 of these
-oem speed sensor have 3 of these
-Avid engine mounts with driver side avid bracket: Can Include trans mount bracket. Post mount bracket off engine. And t bracket. T bracket is a eg because car had eg subframe custom powder coat on brackets -400$ for all bracket and bolts and mounts. Or just mount kit 240$ with 3 mounts and driver bracket
-Stainless steel braided clutch line kit with brand new oem clutch master cylinder and res -150$
-Prop valve off 2000 si -50$
-Hondata cpr coil on plug setup. Just bought a few days ago brand new only on the car for the dyno I Bought Brand new hondata cpr kit. Brand new oem type s coils. 4130 mounting plate for bseries vtec and lo cash dizzy cover in black
-650$.
(This setup new for everything was +800$ almost 900)
-Blox drags. Fronts look to be in ok shape have to check rears fronts only -sold.
rears -??( have to check condition )
-Bseries Axles have some Honda ones and some auto store ones 100$ for each pair
-oem Honda power mirrors fresh si blue. 100$ set
-Bseries linkage. Skunk 2 dual bend shifter and skunk 2 weighted ****. Dimes perf. Solid bushings . -150$
- Nrg quick release setup all black. Everything but a steering wheel. So I have The black nrg hub for 96-00 civic and The quick release for the steering wheel in black and carbon fiber ring but no wheel itself -200$
-99-00 si engine harness -150$ ( I have 3 of these )
-Auto meter boost gauge silver with blue light 50$ with push lok line and both push lok fittings
-Ntk ngk Wideband kit used 180$
one of best wide bands on market
-Auto meter shift light with digital tach level 2 150$
-CNC staging brake 130$. Just the Brake and one single stainless line with A T- nothing else Can ad custom Made mounting bracket for 40$ extra
***Fuel system : all bought brand new by me less then 1000 miles -
Full blown fuel filter purple -10an each side
Full blown regulator black with liquid filled
gauge -10an and -6an return
Full blown fuel rail purple -10an each side
-Skunk 2 pro series front camber kit 120$ (needs 1 ball joint )
-Aero catch hood hatches with locks 60$
-99-00 front brake assembly hubs calipers rotors etc. could use bottomn ball joints. Has new wheel bearings I just did recently . Aftermarket pads and rotors. Good Working shape - 150$
Some more I'm forgetting but I'll remember
Last edited by 94eg5squadMD; 05-25-2016 at 06:32 PM.
Reason: Update
SFWD motor for sale I have receipts of everything done to them this motor only has a few dyno sessions I wasn't able to finsh the car so rather then it just sit id rather let someone else injoy it the most power it made was one 890hp pull I ran out of full so we installed a 8 injector setup and never got to finish it motor was run with brad penn oil price is 4500 see pics below
Located in Carson, California
Contact JR 4247313458
Full set of Weld Magnums plus skinnies
Skinnies are 15x3.5 4x100 mounted with 25x4.5-15 Toyo tires
Fronts are mounted with 25x9.0-15 Toyo slicks
Set has around 10 passes on them...no curbs, bends or cracks on any wheels...setup is in near mint condition...
Price $1800. Willing to separate for the right price.
HM022SR - Exedy Stage 4 Twin Disc Cerametallic Clutch Kit
BRAND NEW NEVER USED
$1100
Intercoolers
31" $40
28" $40
FULLY BUILT FOR TURBO B18C1 Longblock $3000
(more info available upon request)
ZERO miles
Built by Laskey Racing
84mm Benson Sleeved
Benson balanced and micropolished crank
CP pistons
Manley I-Beam Rods
ACL Bearings
OEM (TypeR) oil pump
Lower gasket set
Blueprint and assembly
Manley I-Beam Rods
ARP Head Studs
Cometic Headgasket
RC Injectors 1000CC
Port Flow ported head.....
Driveshaft Shop Level 5 Axle/Hub Kit for EG/EK
Never used since rebuilt from DSS
$900
Peakboost Bseries Ramhorn Turbo Manifold
T3
Coated
Single 44mm
$400
Synapse Synchronic 50mm Wastegate
New
$300
Garrett Turbo GTX3582R
500 miles
NO shaft play and fins all look clean and straight
$1100
2001 H22A4 Shortblock. The block was attained from a Honda dealership in 2001. It was a warranty exchange on a new prelude that had a blown head gasket. Coolant leaked into one of the cylinders. The block just needs a simple bore/hone and its good to go. It comes with main caps, main studs and main girdle. I've had it for over a decade and unfortunately, I never got around to using it.
Best offer. Pick up only.
H22 Cylinder Head:
This head is completely bare, comes with cam caps only. The head itself is in excellent condition. A perfect core for building.
Best offer. Pick up only.
J32 Type S Cylinder Heads:
These heads are completely stock and both in excellent condition. Both front and rear heads sold together. The heads are disassembled but all valves, valve springs, retainers, keepers, rocker arm assemblies, etc will be included with the heads.
MFactory Pro final drive
I have a brand new MFactory pro series b16 4.0 final drive part number MF-TRS-02B4P - Best Offer or trade for B series DSS axles, 13x10 drag rims or B series Ferrea rockers + cash on my end if necessary LMK what boosted part you got to trade as well!
1996-98 K tuned conversion wiring harness used for 1 year, in perfect condition: $150
1996-2000 Hasport EKK1 mounts with 64a inserts used for 1 year, in good condition, could use a little polishing from a heater hose rubbing the rear trans bracket: $275
04-20-2016, 09:02 PM
July FS Thread
