crazes

Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

jc@douglas

FS BNIB Moran Motorsports 325lb injectors for E85/ethanol
$1200 firm shipped
does not include fuel filter

mozzandherb

iTrader: (3)

Please PM me or text me for quicker replies. 613-299-4081. Dan

BTW: I also have a newly built B16 cable transmission with the Synchrotech carbon master rebuild kit and MFactory helical lsd. It's has zero mile. It is in my car right now, but the car has not been driven.

Build sheet reads. B18a built by AEBS
-AEBS T sleeves.
-AEBS O-ringed
-AEBS final bore and hone
-Pauter rods
-83mm Ross pistons 9:1

Price $2900+shipping+Paypal fees and insurance.



























[/QUOTE]

For sale is my M&W pro 10 ignition and a Crane ps92 performance coil. $600+shipping and PayPal fees and insurance.







Dual Bosch 044 pumps, Aeromotive fuel filters, T1 hanger and fittings. Price for everything: $550+shipping, paypal fees and insurance.







New AEM gauges-SOLD!!-

Digital wideband UEGO air/fuel ratio gauge. Price $150 shipped
Oil pressure up to 150psi. Price $170 shipped
Water temperature gauge up to 300 degrees. Price $150 shipped
Boost gauge up to 30psi. Price $140 shipped

Paul_VR6

FS: Weldon C-2015 Pump $400 shipped to lower 48



FS: Aeromotive mini regulator for EFI, -6an fittings. Modified for 1/8" NPT pressure port and pushlock fitting. NEW $120 shipped obo.

lvdb-2

iTrader: (2)

For sale --------------->>>> M&W PRO 10 ignition system complete with Obd1 distributor Asking-$700 shipped in the USA!!

choadsi

$300 shipped/buyer pays PayPal
full blown -8 feed/-6 return with 2x 340 pumps info on the pumps
Pro-Motion Distributing - Products - Introducing Synergy 340<br>LPH/E85 compatible<br>Fuel Pump

E Town DSM

For Sale: GRP Aluminum rods for GSR. .866 wrist pin with ARP2000 3\8 bolts. Used 1 season. $300 Shippped in the USA.
Email: Juice2435@aol.com

turbo-b127

Brand new Bmc race intake manifold, only used for mock up reinforced by James at BMC race, mounts on any B-series head, can be used for a 4 injector set up or 8 injectors, 2 fuel rail mounts as you can see in the pics 900 plus shipping call me or text for more information 305.766.2862

Tex Blackwell

make trades/offers call or PM for details!

EK Civic Acid Dipped with chromoly tig welded roll cage rolling chassis



$2999 - call or PM for details

TeagueSpeed

I'm selling my Garrett GTX4502R turbo. Garrett part # 800269-10

Drag Race GTX4502R, 49 Trim, 71.8 Inducer, 102.3 Exducer - Garrett P/N: 800269-10 : atpturbo.com

I have two exhaust housings. 1.25 and 1.44 A/R. Both housings were polished and then ceramic coated black.

The compressor housing is polished and is also machined for a speed sensor.

The factory Garrett compressor back plate has been replaced with a billet aluminum one to reduce weight.

I'm asking $2900 + shipping for everything.

$MIKE$

iTrader: (13)

Sold

flycivicsi

iTrader: (5)

*Please Read Whole ADD*
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.

I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.

Text or pm 306 551 5139

K series Parts

- Brand new only mounted "ALL In fab" K series sidewinder T3 Turbo Manifold(44mm gate), 3" downpipe(vband for 6262 turbo), Dumptube(also vband for 44mm gate)- sold

-Precision 46mm wastegate. Brand new only mounted - 260 shipped

-Brand new never used Hybrid racing black fuel rail - $120 shipped

- Brand new never used black Hybrid racing FPR - $120 shipped

- BDL 70mm throttle body with 3" vangen clamp flange(no clamp or sensors) with ktuned adapter - sold

-DSS2.9 32mm Used 1000miles 450 shipped

- Precision GT4294, 4" vband outlet maybe 10 passes on it but minor chip on fin - $550 shipped

- Garett 950hp Dual Back door intercooler(core size is 3.5"x12"x24") with 3" piping flanged for a tial 50mm BOV- The outlet piping on the front mount was squished a bit during shipping when I received it. This set up is used. - $450 shipped

- Eg traction bar (garage built so not the nicest) - $100 shipped

allmotorhatch

iTrader: (1)

Borg Warner S400SX 67mm with 1.10 AR housing $1050 OBO

B Series ARP head studs, tqd once but need washers $50


B series Full race intake manifold $350 OBO
The flange is cracked and needs work done to it, besides that it is good to go.

209lsr_ly

iTrader: (1)

Full Partout/Out of the Game SALE!!!!!! All parts are for b series

Manley turbo tuff i-beams rods (used , maybe only 5 miles on them, a dyno session and then parted the motor)
asking 550 obo


T1 cam trigger (2 bracket, 2 sensor, 1 bracket was custom to fit a topmount turbo) with harness has no cam gear asking 400


Skunk2 ultra with 90mm tb 900

M&W pro14 with plugs 650


Electric water pump with golden eagle 22 teeth idler 550


CNC RLZ B16 head with full Ferrea valve train and valves 2600

Wildwood big brake setup from Fastbrake asking 350


Percison turbo dual BB billet wheel 7275 with a 1.10 exhaust
fins clips by Miller awhile back (used)
asking 2000

NLR1000 boost controller with two solenoids asking 650

Weldon 2034a fuel pump with mounting bracket,filter, and all lines with aluminum tank
asking 950

well take more pictures of what is not above
email for faster response zigen_ly@yahoo(dot)com

JDM_JNKY

iTrader: (4)

elevatedj32

A good working Garrett 4294R BB turbo. 1000.00 plus paypal fees and shipping. All offers entertained. It is used, it has no fin damage, Spins freely and not noisy. I can send you a short movie clip to demonstrate. Best offer entertained.

Text me at email me at at piotogo@aol.com for all the photos you want and questions you may have.

chapnutz1

looking to get rid of a few things after upgrading...

PTE 850HP intercooler [/URL]

PTE 6765 high temp coated t4 housing/3"vband/wrinkle coated race cover/some idle time on it only
[/URL]

Garrett GT2876R, brand new, heigh temp coated t2 exhaust housing/5 bolt discharge/polished S comp cover
[/URL]
[/URL]
[/URL]

M&W pro 14, with 4 coils, harness, and parts to make a new harness [/URL]

OEM R35 GTR 580cc top feed injectors
[/URL]

contact me via text for more info/prices 774-319-9072

DKPR87

SOLD

unknown4now

Hello. I'm posting this up for a friend who's not a member on here. Its a brand new in box Precision 6766 Ball Bearing turbo. .96 a/r, Heat Coated rear housing. Asking $1800 obo. Located in North Jersey. Will Ship. Any further questions or etc, email Hiboostracing@gmail.com or call/text (201) 744-4152. Thanks

elevatedj32

Brand new, wired as a spare, never installed or had power applied to it. These are no longer made by MSD. Asking 425.00 OBO. Brand new they were selling for 800.00 and up, depends on where you shop. if interested, email me at piotogo@aol.com. Yes, I know, AOL. LoL

I stand behind this unit 100% as to its working and described condition.

Price lowered to 375.00 OBO, plus shipping and paypal fee's.

Paypal only, no exceptions.... So all you shysters out there fishing, go Guck yourself.

CHEETAH

iTrader: (2)

New in package hybrid racing fuel line kit for Civic and Integra $150

Omnipower 3.5BAR map sensor for K series $50

MSD DIS4 with new ignition wires and 4 Blaster SS coils $350

B series crx mounts $50

CP/Precision 1000cc peak/hold injectors with resistor box $175

Supertech spring seats new and new Titanium retainers (works for K and B series)...$make offer

New non OEM S2000 clutch master cylinder....$make offer (couldn't use it in my CRX K swap).

Text 91727three443one, Greg

ls_on_boost

iTrader: (5)

hi parting out some parts from my sfwd integra all parts have only 7 dyno sessions no track time

sheepybuilt top mount t4 divded twin 38mm tial gates with 10psi springs I believe I have all other rings to go with the gates this set up comes with original downpipe 4' downpipe has a small dig doesn't hurt performance this setup also comes with up pipe and up tubes they were built by a friend of mine and last bullseye 372r I believe it has a 1.0 or 1.10 ar this setup made 880hp before running out of fuel as of right now im not parting maybe down the road or if someone wants the turbo only that's fine price is 2000 see pics

98B18C1

iTrader: (1)

Brand New never used or mounted Dual Bosch 044 with fittings and bracket - 450 shipped!
going with a single pump setup instead...

bert3734

Name: Bobby
Location: Fort Wayne, IN
Price: $11,000 OBO
Email: Bobby.lindsey1@yahoo.com

I've got my 'turn key race car' for sale

I've got a 1990 Integra for sale. This car has been a project of mine for years. I have owned it for roughly 10 years and have been heavily building it for the past 3. Below is a very short list of what's in the car. I have tons for pictures of the car I can share, just let me know what you are looking for.

Exterior I would rate a 7/10 ... its not a show car.
Interior I would rate a 7/10 also ... again its a race car.

There is nothing wrong with the car and its street legal (its just a little loud). I am ready to move onto another project and need to move this one first.

1990 Acura Integra
130k on the chassis, but nearly everything has been replaced
Made 756 hp & 536 ft/lbs @ 32 psi (this setup will easily handle 40 psi)
Car has gone 10.03 @ 155
10 pt cage
AiM Dash


Motor (built by Don at Accelerated Performance)
- Dart Block (81.5 mm stock stroke)
o CP Pistons (coated from Swain Tech)
o Crower Rods
o Eagle Crank (Knife Edged)
o Moroso Oil Pan

- B16 Head
o Ferrea Springs
o Ferrea Valves (0.5mm oversized)
o Crower Cams (Race Engineering Grind)
o T1 Trigger
o AEM Cam Gear

- Transmission (Completely Brand new when purchased)
o MFactory Pro Synchro Gears (1-4)
o MFactory 4.05 Final Drive
o Quaife LSD
o NRG Billet Bellhousing
o Assembled by Chris at Whoopee Doo Racing

- LoveFab Manifold and 4" Downpipe
- Tial Wastegate
- 64/67 Precision Billet Turbo
- Air to Water Intercooler
- Haltec ECU
- M&W PRO 14
- Car has been completely rewired
- 2000 cc ID injectors

wickedEG

Precision billet 72mm turbo dual ball bearing with an 1.44a/r exhaust housing. Very little run time. $2500 Call or text (360)632-9972