Lei Siew Long

the wheel studs are Morosos and the lug nuts are the ones that came with my Bogart Drag on Fly lites. are they a different thread pitch?

Jared

i think the morosos are a standard pitch and thread, where the bogarts(at least mine) are metric.

Lei Siew Long

what open ended lugs would you recommend with a standard pitch?

i tried using my open ended lugs i have on there now, which are the Kragen type, and they dug a groove in the bogarts. so, i used the same lugs with the washers that came with the bogart lugs. those worked but, it digs into the washers as well and are stuck to each other when the lugs are removed.

PNBRACING

hey genious...cut the end of the lug off....very simple

Lei Siew Long

read the whole thread before you post *******.

i'm not trying to put a close ended lug on an extended stud that requires an open ended lug nut.

these are bogart open ended lug nuts that came with the wheels. any other smart suggestions, genius

Jared

Look in the back of a jegs, they have the exactly style of lugnut bogart sends, but in most standard threads.

Lei Siew Long

i'll look into that. Thank you.

b19coupe

ARP also makes a good wheel stud, in the metric thread pattern.

Lei Siew Long

thanks for the suggestion but, it was enough of a pain in the *** to press in the Morosos.

Lei Siew Long

Props to Rich Bogart. i got two sets of -20 thread, 7/16" lugs for my Moroso studs from Rich, free of charge. he didn't require an exchange of my lugs that originally came with the bogarts (metric)