B20Z EF Hatch Race Car projet
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Montréal Qc.
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
B20Z EF Hatch Race Car projet
http://i2.photobucket.com/albums/y41...ps69bf1bd1.jpg
http://i2.photobucket.com/albums/y41...ps086b951e.jpg
http://i2.photobucket.com/albums/y41...ps605c6ff5.jpg
http://i2.photobucket.com/albums/y41...ps9a1dfbf7.jpg
Should be on track in June..
B20Z Crower III 215Whp
Last edited by Frankacura; 07-02-2014 at 10:55 AM.
Trending Topics
#14
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Montréal Qc.
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20Z EF Hatch Race Car projet
I dont know yet how much it weighs.
But as the motor will be install i will get a weight for the projet
I Hope not more than 1800 pounds with driver
Here some new Pic
But as the motor will be install i will get a weight for the projet
I Hope not more than 1800 pounds with driver
Here some new Pic
Last edited by Frankacura; 07-24-2014 at 02:43 PM.
#22
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Montréal Qc.
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
#23
Honda-Tech Member
iTrader: (2)
Join Date: Apr 2007
Location: Riverview, NB, Canada
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20Z EF Hatch Race Car projet
What is the hp you have, my wife's full street car leather integra runs 12.85 @ 109 with her B20/vtec. You must have 800 lbs on her car I'm sure......edit, just saw your post above about 215whp. I wish she could 60ft like that.....lol.
#24
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Montréal Qc.
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20Z EF Hatch Race Car projet
Now on Free exhaust AFR as lowered to 13.4 so i bring it back to 12.9:1
I Guess the Motor have Now 215Whp 160Tq
It Ran my Integra 2400 pounds 12.88@108.9mph On 14' Radial G-Force
#25
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Location: Montréal Qc.
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20Z EF Hatch Race Car projet
First week end on Track with the Car
No Major issues, Just blow a 10A Fuel pump fuse
the Car run Great
But Still lot to do to make it Hook up
The Pass i Ran 1.66 the Box was 7.66 at the 1/8...
But on other slick the box was 1.85 but look like 2nd gear hook up tu get 7.54 at the 1/8.
The best 60fts *** been 1.61 On a verry Hot day
So i Guess a day that will be Sunshine but freshier than 34 degre
On a 1.65 Box and 2nd gear hook up i must be able to run 1/8 in about 7.35
To ending the 1/4 at 11.7
Still to do on car:
Fuel Cell relocalisation (less in the Back)
Shifter bushing to change (I miss 3rd several time cuz of it)
Add front engine mount (im running on 3 now)
Get the Ram air Done (Still taking air from under hood)
I have a 10 pounds less, seat to install.
Install Rear AJD suspenssion Stiffer (Still on Stock)
Install Tiny rear Race Wheel (Higher and lighter)
Find a 1 Band Crank pulley
And Get The Cams Gears Tune on the Dyno to get better Top end without loosing to much Tq...
And a good wheels alignement will be need
See you for more...
No Major issues, Just blow a 10A Fuel pump fuse
the Car run Great
But Still lot to do to make it Hook up
The Pass i Ran 1.66 the Box was 7.66 at the 1/8...
But on other slick the box was 1.85 but look like 2nd gear hook up tu get 7.54 at the 1/8.
The best 60fts *** been 1.61 On a verry Hot day
So i Guess a day that will be Sunshine but freshier than 34 degre
On a 1.65 Box and 2nd gear hook up i must be able to run 1/8 in about 7.35
To ending the 1/4 at 11.7
Still to do on car:
Fuel Cell relocalisation (less in the Back)
Shifter bushing to change (I miss 3rd several time cuz of it)
Add front engine mount (im running on 3 now)
Get the Ram air Done (Still taking air from under hood)
I have a 10 pounds less, seat to install.
Install Rear AJD suspenssion Stiffer (Still on Stock)
Install Tiny rear Race Wheel (Higher and lighter)
Find a 1 Band Crank pulley
And Get The Cams Gears Tune on the Dyno to get better Top end without loosing to much Tq...
And a good wheels alignement will be need
See you for more...