B18C1 Water pipe (between pump and stat) same as other b series??
#1
B18C1 Water pipe (between pump and stat) same as other b series??
B18C1 Water pipe (between pump and stat) same as other b series?? I am just looking for something I can weld the nipples shut on. Not running heater core, oil cooler, or anything like that. I have a B18C1, but the pipe on the core motor got damamged. Was wondering if an LS pipe will fit.
Thanks for any help!
Thanks for any help!
#2
Re: B18C1 Water pipe (between pump and stat) same as other b series??
B18C1 Water pipe (between pump and stat) same as other b series?? I am just looking for something I can weld the nipples shut on. Not running heater core, oil cooler, or anything like that. I have a B18C1, but the pipe on the core motor got damamged. Was wondering if an LS pipe will fit.
Thanks for any help!
Thanks for any help!
#3
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2000
Location: Bloomington, IN, USA
Posts: 10,180
Likes: 0
Received 3 Likes
on
3 Posts
Re: B18C1 Water pipe (between pump and stat) same as other b series??
There are 4 variants of water pipes that I know of and have used.
LS: IACV only, no oil cooler, no heater core port - must use LS thermostat housing to retain heat
Type R: IACV + oil cooler, no heater core port - must use LS/ITR/B16 thermostat housing to retain heat
'94 to '97 GS-R: IACV + oil cooler + heater core
'98+ GS-R: IACV + heater core, no oil cooler port
Right now I'm using the ITR pipe with oem oil cooler and ITR/LS/B16 thermostat housing.
LS: IACV only, no oil cooler, no heater core port - must use LS thermostat housing to retain heat
Type R: IACV + oil cooler, no heater core port - must use LS/ITR/B16 thermostat housing to retain heat
'94 to '97 GS-R: IACV + oil cooler + heater core
'98+ GS-R: IACV + heater core, no oil cooler port
Right now I'm using the ITR pipe with oem oil cooler and ITR/LS/B16 thermostat housing.
#4
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2000
Location: Bloomington, IN, USA
Posts: 10,180
Likes: 0
Received 3 Likes
on
3 Posts
Re: B18C1 Water pipe (between pump and stat) same as other b series??
I'd say use the LS water pipe with GS-R thermostat housing, then cap off the heater hose port on the side of the head with the M16x1.00 cap from the transmission.
#6
Re: B18C1 Water pipe (between pump and stat) same as other b series??
Thanks!! I did block the head off with the trans plug, and I found an LS pipe too...perfect!! Appreciate the quick response!
#7
Re: B18C1 Water pipe (between pump and stat) same as other b series??
There are 4 variants of water pipes that I know of and have used.
LS: IACV only, no oil cooler, no heater core port - must use LS thermostat housing to retain heat
Type R: IACV + oil cooler, no heater core port - must use LS/ITR/B16 thermostat housing to retain heat
'94 to '97 GS-R: IACV + oil cooler + heater core
'98+ GS-R: IACV + heater core, no oil cooler port
We're can I find the 94 97 gsr one
Right now I'm using the ITR pipe with oem oil cooler and ITR/LS/B16 thermostat housing.
LS: IACV only, no oil cooler, no heater core port - must use LS thermostat housing to retain heat
Type R: IACV + oil cooler, no heater core port - must use LS/ITR/B16 thermostat housing to retain heat
'94 to '97 GS-R: IACV + oil cooler + heater core
'98+ GS-R: IACV + heater core, no oil cooler port
We're can I find the 94 97 gsr one
Right now I'm using the ITR pipe with oem oil cooler and ITR/LS/B16 thermostat housing.
Thread
Thread Starter
Forum
Replies
Last Post
Jagan'92
Honda Prelude
40
04-02-2019 07:01 AM