PTE Precision 6266 Turbo & Bosch 2000cc Injectors
05-14-2013, 11:39 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2013
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
PTE Precision 6266 Turbo & Bosch 2000cc Injectors
I had begun to gather a few turbo parts for a build but 5 months later into it I've decided I'm just going to buy something (a Honda) that is already turbocharged.
Turbo hasn't even been taken out of the bag. Inlet and outlet are V-band .82 a/r journal bearing.
Taking best offers but please no low ballers. In no rush to sell.
Precision turbos has gone up and my purchase price was $900 + tax & shipping back in Jan. 2013
So even this price was a good deal then but feel free to throw some offers. Worst answer is NO.
PTE Precision 6266 S Port Turbo NEW - NEVER INSTALLED and/or USED!!!
Bosch 2000cc NEW- NEVER INSTALLED and/or USED!!!
Injectors were only taken out for pictures as it wasn't sealed tight like the turbo was.
High impedance (no inline resistors or resistor box requires for use)
These will plug & play for all B-Series motors/engine (Not sure about K-series) Please do your own research as I do not know.
Injectors harness adaptors are for a OBD II/2
(Meaning, if you have a 96-01 Civic/Integra the harness adaptor will plug & play)
These will perform up to 8 bar of fuel pressure.
Flow rates:
2000 cc/min - 3.0 BAR (43.5 psi)
Turbo hasn't even been taken out of the bag. Inlet and outlet are V-band .82 a/r journal bearing.
Taking best offers but please no low ballers. In no rush to sell.
Precision turbos has gone up and my purchase price was $900 + tax & shipping back in Jan. 2013
So even this price was a good deal then but feel free to throw some offers. Worst answer is NO.
PTE Precision 6266 S Port Turbo NEW - NEVER INSTALLED and/or USED!!!
Bosch 2000cc NEW- NEVER INSTALLED and/or USED!!!
Injectors were only taken out for pictures as it wasn't sealed tight like the turbo was.
High impedance (no inline resistors or resistor box requires for use)
These will plug & play for all B-Series motors/engine (Not sure about K-series) Please do your own research as I do not know.
Injectors harness adaptors are for a OBD II/2
(Meaning, if you have a 96-01 Civic/Integra the harness adaptor will plug & play)
These will perform up to 8 bar of fuel pressure.
Flow rates:
2000 cc/min - 3.0 BAR (43.5 psi)
Last edited by 9psiTURBOsi; 05-15-2013 at 01:44 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bonestock98GS
Forced Induction
12
08-15-2013 07:08 PM