K24/K20 Built Motor and K24-Turbo Kit
#1
Honda-Tech Member
Thread Starter
K24/K20 Built Motor and K24-Turbo Kit
Im posting up for a friend, this turbo and motor are in good working condition, no problems at all. It was built from the ground up using OEM bearings,gaskets,etc. everything was built and measured within specs.
here is the list enjoy:
complete longblock $SOLD
K20 6Speed tranny with quiafe LSD $SOLD**
DC/EG K Series Mounts $SOLD**
RBC Intake Manifold $SOLD**
Hondata Kpro $SOLD
Misimoto full core radiator with slim fans for Kseries $250
Karcept Shifter box$SOLD
RSX-S Shifter cables $SOLD
RSX-S Throttle Body with sensors $SOLD
3" Thermal Exhaust for 94-01 Acura Integra clean condition unpainted $280
Turbo Setup $2900 obo
Turbo kit will fit any EG or DC chassis, possibly EK as well due to the fact the manifold hugs the motor really well for clearences
Includes:
Spoolinperformance Side Winder Tubular Manifold $850 lifetime warranty on manifold
Turbo is a T4 Innovative Dual Ball bearing with a Billet Turbine GTS70 specs a/r housing .82 retails at $2000 believe it or not only less then 3000 miles no shaft play no smoke
3" downpipe vband from turbo with flex pipe
RC Injectors 1600cc
Tial 44mm wastegate PURPLE
Greddy RS BOV
Spoolinperformance 2.5 Intercooler piping with a FMIC that has both endtanks on one side all sleeves and t-bolt clamps
Turbo Blanket
Vacuum box, all vacum lines
Feed line and return line all stainless steel with -AN fittings
tap oil pan with -10 bung on it
Blox 4" Velocity Stack
cluster bezel for Silver Autometer Boost Gauge and A/F gauge
Hondata Boost by Gear e-Boost solenoid
setup makes 452whp/338tq on 91 octane at 17psi on a very conservative tune on a k24/k20 setup with just pistons and rods
here are couple pics of the setup.
Pm if your interested.
here is the list enjoy:
complete longblock $SOLD
K20 6Speed tranny with quiafe LSD $SOLD**
DC/EG K Series Mounts $SOLD**
RBC Intake Manifold $SOLD**
Hondata Kpro $SOLD
Misimoto full core radiator with slim fans for Kseries $250
Karcept Shifter box$SOLD
RSX-S Shifter cables $SOLD
RSX-S Throttle Body with sensors $SOLD
3" Thermal Exhaust for 94-01 Acura Integra clean condition unpainted $280
Turbo Setup $2900 obo
Turbo kit will fit any EG or DC chassis, possibly EK as well due to the fact the manifold hugs the motor really well for clearences
Includes:
Spoolinperformance Side Winder Tubular Manifold $850 lifetime warranty on manifold
Turbo is a T4 Innovative Dual Ball bearing with a Billet Turbine GTS70 specs a/r housing .82 retails at $2000 believe it or not only less then 3000 miles no shaft play no smoke
3" downpipe vband from turbo with flex pipe
RC Injectors 1600cc
Tial 44mm wastegate PURPLE
Greddy RS BOV
Spoolinperformance 2.5 Intercooler piping with a FMIC that has both endtanks on one side all sleeves and t-bolt clamps
Turbo Blanket
Vacuum box, all vacum lines
Feed line and return line all stainless steel with -AN fittings
tap oil pan with -10 bung on it
Blox 4" Velocity Stack
cluster bezel for Silver Autometer Boost Gauge and A/F gauge
Hondata Boost by Gear e-Boost solenoid
setup makes 452whp/338tq on 91 octane at 17psi on a very conservative tune on a k24/k20 setup with just pistons and rods
here are couple pics of the setup.
Pm if your interested.
Last edited by LSVTEC408; 12-15-2009 at 07:03 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
DaveF
Classifieds: Forced Induction
39
04-05-2007 08:11 AM
ThePro
Classifieds: Forced Induction
3
05-11-2005 08:23 AM