Re: 87 Civic: How to replace wheel bearings?
This procedure is in any Haynes or factory service manual. If searching here doesn't net anything, there may be a detailed write-up on red pepper racing dot com. The short of it off the top of my head is 1. remove wheel (19mm socket) 2. remove brake caliper (17mm socket or box end wrench) 3. remove axle nut (pneumatic or electric impact gun helps here, 32mm socket) 3. remove knuckle/hub to strut bolts (17mm) 4. pop lower lower control arm ball joint loose (hammer and prybar) 5. pop outer tie rod ball joint loose (harbor freight ball joint separator) 6. remove axle from knuckle/hub, let the axle hang in the transmission, knuckle/hub should be on the bench by now. 7. press out old bearing (hydraulic press, or your local auto or machine shop) 8-...press in new bearing and put everything back together