I have an 86 Honda Accord (Carburated-Automatic). I start the car by hitting the gas once and then start. It goes to 2200 RPM's and then after a moment or two I kick it down to 1500 where I put it into Drive and go. Is there an adjustment I can make that will adjust both above RPM's down as I am afraid
I am going to hurt the trans by putting it into gear at 1500.
Your car is running how it should. It is supposed to run about 1500RPM until the engine warms up a bit. It won't hurt it to kick it into drive like that. It does eventually settle down to ~750RPM or so, doesn't it after it warms up?
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.