Re: Viper alarm help
Use the valet/program button to turn alarm off, [disarming without remote], once it is disarmed, try reprogramming the remote.
There is no Viper 591m alarm that I know of, there is a 591xv
Disarm without remote- turn ign. switch on, press and release valet/program button.
Program remote- turn ign. switch on, press and release valet/program button one time, then press and hold the button, [do not let go of button] siren will chirp and LED will flash, press lock button on remote, siren will chirp if remote programed, release button turn of ign. try remote.
If when going into program mode the siren gives a long chirp, the programing is locked and you need a "Bitwriter" to unlock it.
Now with all that said, if your remote is a 479v then your alarm should be a 791xv.
The disarm without the remote is the same although "override" can be programed to up to 5 press and release of valet/program button and there is a short delay after you press the valet/program button before alarm turns off, so I would stuff a sock into the siren so if you have to try it a few times till you get the right number of presses, you will not **** off the neighbourhood.
Programing the remote is the same except the drivers door, [any door] must be open. 94 94
RIP Zack 2001-2013, my best friend.